老式油压材料试验机测试系统的技术改造

对老式油压材料试验机进行技术改造的方案是利用原试验机结构框架和加载系统。改进落后的测试系统使其达到现代科技水平。本文论述了进行改造的项目、工作原理、实施方法。方案一经买施．对拥有大量老式油压材料试验机的我国．其社会效益和经济效益都将是十分可观的。     

新型薄壁柴油机缸体铸件的研制与应用

采用低合金化、合锑多元复合孕育剂、扫描电镜、200h台架试验、以及l000h耐久试验等方法对新型薄壁柴油机缸体铸件进行了研制与应用试验．试验结果表明：碳当量控制在3．9％--4．1％时(与菲亚特缸体的碳当量大体相当)，采用低合金化及合锑复合孕育剂，可稳定获得高强度铸件，抗拉强度σb＞270MPa，硬度HB＞210，白口倾向小，硬度差小于35HB，其性能均达到菲亚特缸体的性能要求．对无缸套缸体的缸壁表面进行激光处理，比传统缸套的耐磨性提高一倍以上．由于采用了无缸套缸体生产技术，简化了柴油机的结构，降低了柴油机的生产成本，提高了柴油机使用性能和技术含量．     

双层缠绕时偏角对钢绳磨损的影响

本文通过对实验及现场测量结果的综合分析,认为双层缠绕时的偏角变化对钢绳磨损没有显著的影响。     

提高抽送黄河水用泵寿命的重要途径

从保证抽送黄河水用泵（以下简称抽黄泵）的寿命和工作可靠性出发，提出了抽黄泵性能参数选择的原则：限制抽黄泵的单级扬程Ｈ；限制抽黄泵单级扬程Ｈ与转速ｎ的乘积Ｈｎ值。并给出抽黄泵性能参数的Ｈ·ｎ－Ｑ关系曲线和泵的比转速ｎ＿ｓ与单级扬程Ｈ的关系曲线。     

A procedure for measuring the flexibility of single wood-pulp fibres

A way of determining the flexibility of wood-pulp fibres is developed, which involves i) a precise measurement of the topology of single-fibres by using a confocal laser scanning microscope and ii) the measurement of the elastic modulus of the fibres by using a single-fibre fatigue cell. Reported in this paper are the initial results of tests carried out on black spruce fibres, which have been subjected to three different levels of mechanical refining energy, namely ∼1100, 2300, and 3500 kWh/t. It is found that the fibre flexibility rises significantly between the first and second energy levels, but it does not change to the same degree between the second and third ones. The described procedure of measuring the flexibility of fibres may be used to establish the appropriate refiner energy necessary for the production of a specific grade of paper. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 1, pp. 115–128, January–February, 2006.     

气密性碳涂覆光纤筛选强度与电阻关系研究

通过实验分析确立了把光纤电阻作为衡量气密性碳涂覆光纤通过２％应变筛选的过渡标准。要拉制２％应变筛选的碳涂覆光纤，其电阻值应小于３０ｋΩ／ｃｍ。     

双轴等拉低周疲劳实验装置

本文给出能在一般单向加载液压疲劳试验机上做双轴等拉低周疲劳实验研究的双向拉伸装置,并对有关影响因素进行了讨论。 本试验是在百吨液压低周疲劳试验机上进行的。双向拉体装置已经受近百万次疲劳载荷,其中交变载荷幅围5.5,t亦经受近20万次。在使用过程,各构件完好合手使用要求,将十字试样进行低周疲劳断裂试验,成功地开出合格裂纹,用它进行超速条件下叶轮材料性能研究亦取得初步结果。可以认为它适用于平而应力集中问题低周疲劳性能的研究。若使用液压高、中周疲劳试验机,它还可用于双轴载荷下裂纹试样裂纹扩展的研究。 本文指出了双向拉伸装置有待改进的方面。     

稀土复合变质对新型铸造热锻模具钢组织与性能的影响

研究了稀土复合变质对新型铸造热锻模具钢（CHD钢）组织与性能的组织。结果表明，稀土复合变质能细化晶粒，并且随着稀土量的增加。细化效果明显；加入适量的稀土复合变质后，夹杂物数量明显减少，夹杂物趋于球化并均匀地分布在钢中，形态和分布得以了改善，向钢中加入稀土进行复合变质，能促进贝氏体、奥氏体和位错亚结构的形成，细化马氏体板条。当残留稀土含量为0.02%时，CHD钢的硬度、强度变化不大，断裂韧性（KIC）和疲劳裂纹扩展门槛值（△Kth）有所提高，冲击韧性、延伸率、断面收缩率提高了近一倍，抗热疲劳性能也最好。     

儿童易疲劳与血清中微量元素含量的相关性研究

测定了1562名儿童(其中包括153名易疲劳儿童)血清中Zn、Fe、Cu、Ca、Mn和Pb的含量。研究发现,易疲劳儿血清Ca含量(84.4±12.5μg/mL)显著低于对照组儿童(88.5 4±13.4μg/mL),P<0.05;Fe含量(1.094±0.22μg/mL)显著高于对照组儿童(1.07 4±0.22μg/mL),P<0.05;Mn含量(0.040 4±0.035μg/mL)非常显著高于对照组儿童(0.035 4±0.013μg/mL),P<0.001。     

Some microrheological aspects of wood-pulp fibres subjected to fatigue loading

Wood-pulp fibres are recognized as concentrically-layered, laminated composite tubes of structural reinforcing material, the cellulose microfibrils, embedded in a cementing matrix of hemicellulose and lignin. When the single fibres are subjected to cyclic mechanical action, their morphological behaviour is characterized by the fatigue growth of micro-voids and surface damage which individually and collectively give rise to stress concentrations, and eventually crack development. The progressive damage phenomena, evinced by the surface imaging and optical sectioning techniques through utilizing confocal laser scanning microscopy, are understood to be consequences of the cumulative material micromechanical degradation and subsequent microstructural breakdown of the cellulose microfibrillar framework. This structural breakdown is believed to effect the fibrillation and flexibilization of the fibres This revised version was published online in August 2006 with corrections to the Cover Date.