A new model for the life prediction of GH4133 under TMF conditions

Thermal mechanical cyclic strain tests were carried out under in-phase and out-of-phase conditions on a Nickel-base Superalloy GH4133 in the temperature range of 571-823℃. Based on analyzing the present models of TMF (thermal mechanical fatigue) life prediction, a new model for predicting nickel-base superalloy TMF lifetime was proposed.TMF life of superalloy GH4133 was calculated accurately based on the new model. Experimental TMF life has been compared with the calculatedresults and all results fall in the scatter band of 1.5. The calculating results show that the new model is not only simple, but also precise. This model will play great roles in life prediction of the metal materials and the engineering components subjected to non-isothermal service conditions.     

On disjoint configurations in infinite graphs

For a graph A and a positive integer n, let nA denote the union of n disjoint copies of A; similarly, the union of ?₀ disjoint copies of A is referred to as ?₀A. It is shown that there exist (connected) graphs A and G such that nA is a minor of G for all n??, but ?₀A is not a minor of G. This supplements previous examples showing that analogous statements are true if, instead of minors, isomorphic embeddings or topological minors are considered. The construction of A and G is based on the fact that there exist (infinite) graphs G₁, G₂,… such that G_i is not a minor of G_j for all i ≠ j. In contrast to previous examples concerning isomorphic embeddings and topological minors, the graphs A and G presented here are not locally finite. The following conjecture is suggested: for each locally finite connected graph A and each graph G, if nA is a minor of G for all n ? ?, then ?₀A is a minor of G, too. If true, this would be a far‐reaching generalization of a classical result of R. Halin on families of disjoint one‐way infinite paths in graphs. © 2002 Wiley Periodicals, Inc. J Graph Theory 39: 222–229, 2002; DOI 10.1002/jgt.10016     

运动玻璃等级标记的在线提取和识别

为了识别浮法玻璃生产线上玻璃的等级标记 ,实现玻璃的自动化分等级堆垛 ,本文提出了运用减影的方法提取运动玻璃上的等级标记 ,并提出了一种基于膨胀的识别目标的新方法 ,此方法源于在包含标记的二值图象中 ,从标记区到背景区黑色象素点 (灰度值为零 )的个数大幅度减少的现象。玻璃等级动态在线识别系统的应用实践表明 ,本文提出的方法运算速度快 ,标记的识别率高     

Biomagnetic measurements utilising a superparamagnetic marker: a feasibility study

Summary A preliminary study is here reported on a new potential marker for biomagnetic measurements. The marker consists of superparamagnetic polymer microspheres which were detected in the presence of external steady magnetic fields by means of an r.f.-SQUID magnetometer. The particles were prepared in samples differing in the concentration value and immersed in a homogeneous magnetic field of variable intensity. A simple model was taken into account for the distribution of the microspheres in the samples, so that the theoretical values were compared to the marker field values measured by the biomagnetic sensor. The overall sensitivity of the experimental apparatus and the minimum concentration value of the marker were then estimated.     

Strength of cylinder joint adhesively bonded by coupling

Summary A method of joining two metal cylindrical shafts with adhesive coupling is proposed. Two cylindrical shafts with the same diameter are connected by bonding through a cylindrical coupling with epoxy resin. The strength of the shaft joint under tensile loading and torsional loading is investigated analytically and experimentally. The stress and strain distributions of the shaft joint is analyzed by the finite element method. The analyzed strain distributions in the joint are compared with experimental values. The joint strength is predicted by applying the strength laws of shafts, coupling, adhesive layer and adhesive interface between shaft and adhesive coupling. The effects of the coupling dimension on the joint strength are examined. It is shown that the adhesive shaft joint can transfer the load by which the cylindrical shafts are plastically deformed.This paper was refined by the author, K. Ikegami, during statying at Technische Universität München under the support of Deutscher Akademischer Austauschdients. The author is grateful to Professor Lippmann of Technische Universität München who is the host professor of the support.     

老式油压材料试验机测试系统的技术改造

对老式油压材料试验机进行技术改造的方案是利用原试验机结构框架和加载系统。改进落后的测试系统使其达到现代科技水平。本文论述了进行改造的项目、工作原理、实施方法。方案一经买施．对拥有大量老式油压材料试验机的我国．其社会效益和经济效益都将是十分可观的。     

无缝线路缓冲区病害分析及根治措施

概述了缓冲区养护中存在的问题,分析了无缝线路缓冲区病害的成因,提出了治理病害的针对性措施.     

织造过程中经纱张力计算机控制系统的研究

为了提高织机生产效率和扩大织造品种范围，提出了织造过程中经纱张力控制的目标和相适应的控制方案，研制了经纱张力计算机控制系统，达到了预期的性能指标。     

Influence of Cr interlayer on the structure and optical properties of Ag films on glass substrate by magnetron sputtering

Optical properties and microstructure of Ag film on glass substrate with Cr intermediate layer were studied by using spectrophotometer and XRD. The spectra results showed that introducing Cr intermediate layer reduced the surface roughness and promoted the reflectivity of Ag film. The XRD analysis showed that the crystalline grains increased and the stress decreased. The adhesion was also improved by using the tape test method.     

Hetergeneous-nucleation synthesis of monodisperse ε-cobalt nanoparticles using palladium seeds

Monodisperse bimetallic Pd–Co nanoparticles were prepared via a thermal decomposition of cobalt carbonyl using palladium seeds at the Pd/Co molar ratios 0.5%, 1%, and 5%. The heterogeneously nucleated nanoparticles without any size-selective precipitation are sufficiently uniform to self-assemble into ordered arrays. The as-synthesized nanoparticles are each a single crystal with a complex cubic structure called ε-Co. The presence of Pd seeds seems to improve the stability of Co nanoparticles against oxidation based on the results from time-dependent magnetization measurement.