Effects of BaCl_2 on slow vacuolar ion channels on radish by patch-clamp

Effects of BaCl2 on slow vacuolar ion channels on radish by patch-clamp YANG Pin (杨 频) & ZHANG Liping (张丽平) Institute of Molecular Science, Shanxi University, Taiyuan 030006, China Correspondence should be addressed to Yang Pin (email: yangpin@sxu.edu.cn)     

7,8-二氢-6,6-二甲基-7,8-环氧-6氢-吡喃[2,3-f]苯并-2,1,3-噁二唑的合成

本文给出了一条较好的制备7,8-二氢-6,6-二甲基-7,8环氧-6氢-吡喃[2,3-f]苯并-2,1,3-噁二唑的合成路线,即由对乙酰氨基苯酚经酯化、Fries重排、环合、还原、脱水、硝化、脱酰基、氧化、脱氧和催化环氧化等反应制得标题化合物,其结构经元素分析和光谱数据确证。     

A common method for the determination of several calcium channel blockers using an HPLC system with ultraviolet detection

We report a common HPLC method for the single or simultaneous determination of four calcium channel blockers (CCB), namely diltiazem (DTZ), verapamil (VER), nifedipine (NIF) and nitrendipine (NIT) and their active metabolites demetildiltiazem and deacetildiltiazem (MA and M1), norverapamil (NOR), and dehydronifedipine (DHN). DHN was first synthesised in our laboratory and different pH values of the mobil phase were subsequently prepared and tested for chromatographic separation. The detection system and the environmental light conditions were optimised. The best separations of all analytes were obtained using a C₁₈ column and a mobile phase of methanol, 0.04 M ammonium acetate, acetonitrile and triethylamine (2:2:1:0.04 v/v). Quantitation was performed using imipramine (IMI) as the internal standard. For DTZ and its metabolites (M1 and MA), the wavelength chosen was 237 nm; for VER and its metabolite NOR, it was 210 nm; and, finally for NIF and its metabolite DHN and NIT it was 216 nm. When a simultaneous analysis was carried out the wavelength was of 230 nm. The optimum pH were 7.90 and 7.10 when the separation of NIT and DTZ or VER and NIF were carried out, respectively, and 7.90 when a simultaneous separation was carried out. The detection limit of the assay was less than 8 ng ml⁻¹ for all compounds, with coefficients of variation less than 7% (for inter- and intra-day) over the concentration range of 1–1000 ng ml⁻¹. The retention times were less than 11 min. When NIF or NIT were studied, it was necessary to use a sodium vapour lamp in order to avoid the photodegradation which takes place under daylight conditions.     

Instrumental barriers in biological Fourier transform infrared spectroscopy

Biological applications of infrared spectroscopy have pressed for ever greater instrumental capabilities in terms of spectral sensitivity and quantitative exactness. Improved instrumentation has provided measurement of many vibrational modes in biological samples that previously were lost in noise. With highly optimized sampling conditions, useful measurements have been made with a peak-to-peak noise level less than 5 microabsorbance (5×10^–6 absorbance), at 0.5 cm^–1 resolution. However, optical and instrumental instabilities often result in sine waves that are not totally removed by the ratio of sample to reference. These often limit effective spectral sensitivity to 50 or 100 microabsorbance, peak-to-peak, and constitute a non-random noise. Non-atmospheric absorptions, especially one at 1959 cm^–1 with 0.8 cm^–1 band width (FWHM) are reported. The latter is due to a trace impurity in the KBr beam splitter substrate and compensator plate. Improvements in instrumentation and sampling conditions are expected to yield measurements of absorption bands as small as 50 microabsorbance with excellent signal/noise.     

Hall effects and entropy generation applications for peristaltic flow of modified hybrid nanofluid with electroosmosis phenomenon

The electroosmotic peristaltic flow of modified hybrid nanofluid in presence of entropy generation has been presented in this thermal model. The Hall impact and thermal radiation with help of nonlinear relations has also been used to modify the analysis. The assumed flow is considered due to a non-uniform trapped channel. The properties of modified hybrid nanofluid model are focused with interaction of three distinct types of nanoparticles namely copper ($Cu)$, silver ($Ag$) and aluminum oxide ($A{l}_2{O}_3).$ The mathematical modeling and significances of entropy generation and Bejan number are identified. With certain flow assumptions, the governing equations are attained for optimized peristaltic electroosmotic problem. Widely used assumptions of long wave length and low Reynolds number reduced the governing equations in ordinary differential equations. The ND solver is flowed for the solution process. The physical significant of results is observed by assigning the numerical values to parameters.     

Lipophilicity in PK design: methyl, ethyl, futile

Lipophilicity, often expressed as distribution coefficients (log D) in octanol/water, is an important physicochemical parameter influencing processes such as oral absorption, brain uptake and various pharmacokinetic (PK) properties. Increasing log D values increases oral absorption, plasma protein binding and volume of distribution. However, more lipophilic compounds also become more vulnerable to P450 metabolism, leading to higher clearance. Molecular size and hydrogen bonding capacity are two other properties often considered as important for membrane permeation and pharmacokinetics. Interrelationships among these physicochemical properties are discussed. Increasing size (molecular weight) often gives higher potency, but inevitably also leads to either higher lipophilicity, and hence poorer dissolution/solubility, or to more hydrogen bonding capacity, which limits oral absorption. Differences in optimal properties between gastrointestinal absorption and uptake into the brain are addressed. Special attention is given to the desired lipophilicity of CNS drugs. In examples using -blockers, Ca channel antagonists and peptidic renin inhibitors we will demonstrate how potency and pharmacokinetic properties need to be balanced.     

The Structure of New Host Molecules that form Channel Inclusion Compounds

1,3-Benzenediamine,N,N′-bis(4,6-dichloro-1,3,5-triazine-2-yl) and 1,3,5-Triazine,2,2′-[2-methyl-1,3-phenylenebis(oxy)] bis(4,6-dichloro) were synthesized as host molecules. The inclusion compound of 1,3-Benzenediamine,N,N′-bis(4,6-dichloro-1,3,5-triazine-2-yl) crystallizes in the monoclinic crystal system in space group C2/c. The host molecule occupies the space group 2-fold special position and packed in the crystal lattice in such a manner as to leave channels running along the c axis of a rectangular cross-section. It crystallizes with two molecules of acetone that are hydrogen bonded to the amino nitrogen atoms. Molecules of 1,3,5-Triazine,2,2′-[2-methyl-1,3-phenylene bis(oxy)]bis(4,6-dichloro) are packed in the crystal in such a manner as to leave channels of a trapezoid cross-section that are running along the a axis. Guest molecules such as metanol, ethanol, and ethyl acetate can be used to fill the channels. The crystal structures of two inclusion compounds are described.     

Simulations of the active transport of a neutral solute based on a kinase-channel-phosphatase topology

Simulations of coupled interactions involving two opposite enzymatic reactions, solute diffusions, and electrostatic interactions between membrane charges and charged solutes were conducted under a fixed kinase-channel-phosphatase (KCP) topology oriented from the outside to the inside of a porous membrane structure. Depending on the kinase and phosphatase locations, we recently demonstrated that an active transport of a phosphorylated substrate may occur via the opposite topology, that is, a PCK topology. The present analysis demonstrates that, under a KCP membrane topology, which also behaves as a specific ATP-dependent transporter, the active transport of a neutral substrate may occur. This analogous active transport appears to be dependent on the phosphatase location and on the membrane surface potentials. A broad analysis of the role played by the main parameters taken into account in the model was conducted in order to define precisely the physico-chemical conditions and the membrane topology needed for the highest active transports within the shortest time.