Silver Nanowires and Silanes in Hybrid Functionalization of Aramid Fabrics

New functionalization methods of meta- and para-aramid fabrics with silver nanowires (AgNWs) and two silanes (3-aminopropyltriethoxysilane (APTES)) and diethoxydimethylsilane (DEDMS) were developed: a one-step method (mixture) with AgNWs dispersed in the silane mixture and a two-step method (layer-by-layer) in which the silanes mixture was applied to the previously deposited AgNWs layer. The fabrics were pre-treated in a low-pressure air radio frequency (RF) plasma and subsequently coated with polydopamine. The modified fabrics acquired hydrophobic properties (contact angle Θ_W of 112–125°). The surface free energy for both modified fabrics was approximately 29 mJ/m², while for reference, meta- and para-aramid fabrics have a free energy of 53 mJ/m² and 40 mJ/m², respectively. The electrical surface resistance (R_s) was on the order of 10² Ω and 10⁴ Ω for the two-step and one-step method, respectively. The electrical volume resistance (R_v) for both modified fabrics was on the order of 10² Ω. After UV irradiation, the Rs did not change for the two-step method, and for the one-step method, it increased to the order of 10¹⁰ Ω. The specific strength values were higher by 71% and 63% for the meta-aramid fabric and by 102% and 110% for the para-aramid fabric for the two-step and one-step method, respectively, compared to the unmodified fabrics after UV radiation.     

高效液相色谱-串联质谱法测定泡沫灭火材料及其他材料中的全氟辛烷磺酸及其盐

建立了一种高效液相色谱-串联质谱(HPLC-MS/MS)测定泡沫灭火材料、洗涤剂以及织物整理剂中全氟辛烷磺酸及其盐(PFOS)的方法。对应产品中的PFOS用水超声提取后,经固相萃取柱淋洗萃取,萃取液以乙腈-10 mmol/L乙酸铵溶液(80:20, v/v)为流动相进行HPLC分离,在负离子模式和多级反应监测(MRM)方式下进行测定。用两个子离子的相对丰度定性,外标法定量。PFOS的测定在0.002~0.1 mg/L范围内线性关系良好(r2=0.998);泡沫灭火材料、洗涤剂以及织物整理剂中PFOS的加标回收率分别为93.4%～103%, 93.2%～102%和91.8%～102%,精密度(以相对标准偏差(RSD)计)分别为0.48%～3.52%, 0.78%～1.79%和0.47%～3.47%;方法的检出限均为2 mg/kg(0.0002%)(信噪比（S/N）≥10),满足欧盟法规对泡沫灭火材料、洗涤剂以及织物整理剂中PFOS的限量检测要求。该方法准确度和灵敏度高,前处理简单,可用于泡沫灭火材料、洗涤剂以及织物整理剂中PFOS的检测。     

炭纤维织物/环氧树脂基复合材料的摩擦磨损性能研究

研究了炭纤维织物/环氧(CF/EP)复合材料与45#钢在环-环端面干摩擦状态下的摩擦磨损特性,考查了制备工艺和MoS2与石墨不同配比等对CF/EP复合材料干摩擦性能的影响,采用扫描电子显微镜观察复合材料及其偶件磨损表面形貌.结果表明:半干法制备的环氧树脂体积分数为40%的CF/EP复合材料的摩擦系数稳定;纯CF/EP复合材料主要表现为粘着磨损特性;MoS2与石墨改性后复合材料摩擦磨损性能明显改善,质量比为1.5∶1的MoS2与石墨改性CF/EP复合材料具有最佳的摩擦磨损性能,其稳态摩擦系数为0.14～0.15,磨损量3.15×10-5 mg/r.     

颗粒材料三维应力路径下的接触组构特性

颗粒材料的宏观应力变形特征与其微观接触力、组构等紧密相关.一般而言,强接触系统属于颗粒内部体系的传力结构,其对应的组构张量是影响宏观应力性质的重要因素.细观数值方法(如离散单元法)能够反映物理试验的基本规律,并且可以方便地提取宏微观数据来研究颗粒体系的应力变形机制.采用离散单元法(discrete element method,DEM)进行一系列等$p$等$b$应力路径下颗粒材料的真三轴试验,在此基础上研究了三维应力路径下颗粒材料的宏微观力学参数的演化过程、三维组构张量与应力张量多重联系以及强接触体系反映的宏观应力特征.研究表明:颗粒体系偏应力峰值状态和临界状态均存在与加载路径无关的宏微观特征;三维应力路径下组构张量与应力张量存在非共轴性,但其联合不变量演化过程表现出加载路径无关的特征;与弱接触系统的组构张量相比,强接触系统的组构张量更能反映宏观应力张量的特征;强弱接触体系的组构张量对颗粒体系宏观响应的贡献不同,其分界点存在一定取值范围,但采用平均接触力较为简单合理.      

国内外羊毛西装面料加工性能的比较

选择35种国内外羊毛西装面料,利用FAST仪对其加工性能进行测试,运用主成分分析方法对其差距与缝纫质量进行比较.结果表明,国内外毛西装面料的主要差异是可成型性,其他依次为湿膨胀性、厚重性、松驰回缩性等.这些差距表明国外毛西装面料加工时制作难度小,尺寸稳定性好,缝纫缩皱较轻,而国内面料制作难度大,缝纫缩皱严重.     

织物的动态湿传递

本文用自制的动态模拟装置,探讨了服装面料的动态湿传递,并测定了在非稳态条件下,人体汗水的蒸发及水汽传递的情况.通过对全棉、涤棉、涤毛、真丝、细麻、粗麻等7种服装面料的试验,提出织物的结构参数对湿传递影响的多元回归方程,并得出了面料厚度对湿传递影响最明显的结论.     

苏米尔盆地中新世海滩岩及沉积环境探讨

对苏米尔盆地布阶下、上段生物屑灰岩的野外观察和实验室岩石学、矿物学、沉积学综合分析结果表明:这些岩石具潮间带和陆上渗流—潜流带胶结特点,其沉积环境为亚热带—热带中至较低能量港湾式海滩,岩石中陆源碎屑来源于邻近区域沉积岩和较远的阿尔卑斯变质岩。     

INVESTIGATION OF THE CHARACTERISTICS OF DYNAMIC HEAT AND MOISTURE TRANSMISSIONS THROUGH FABRICS

In this paper, the dynamic heat and moisture transmissions through fabrics are investigated, and their interaction manner is discussed. The essentials of the apparatus developed for measuring the amount of heat flow through fabrics during the whole period of simulated sweating action is reported. The registered heat flow flux in a continuous curve form covering the complete dry-wet-dry cycle of the sample is presented. Interpretation of the feature of the curve and indexes for characterizing the wearing comfort property of fabrics are suggested.