C_2H_2分解爆轰的实验研究

在长30m,公称直径(Dg)分别为50、65、80和100mm的管道内,进行了C_2H_2分解爆轰实验。用O_2—C_2H_2爆轰波引爆C_2H_2,测量了管道内的爆轰压力,及在管道端面上的反射压力。与以前认为在管径500mm管道内不会出现自持的C_2H_2分解爆轰的意见相反,在这样的管道内也发生了C_2H_2分解炸轰。在管端测到了1700kg/cm~2的异常高压,并对数次异常高压的破坏威力作了记录。     

热爆炸临界参数的数值解法

本文提出的热爆炸临界参数的数值解法是一种变分方法.这种方法依据的是文献[1]给出的热爆炸临界参数的一个变分原理。数值计算的结果表明,这种方法是一种简便、经济而又精确度较高的方法。     

强点火作用下C3HF7对甲烷-空气爆炸的抑制

为解决瓦斯输送过程中的爆炸安全问题,探索寻找绿色环保且阻火性能优越的新型抑爆剂,开展了当量比下甲烷-空气预混气体爆炸传播过程中的七氟丙烷抑爆效果研究。实验采用长径比L/D=108的水平管道爆炸特性测试系统,研究了在强点火作用下不同体积分数的七氟丙烷对9.5%甲烷-空气预混气体最大爆炸压力、最大压力上升速率和火焰传播速度的影响。实验结果显示:将2.5 m长的管段作为七氟丙烷抑爆区时,七氟丙烷阻断9.5%甲烷-空气预混气体爆炸火焰传播的最小体积分数为5%;当七氟丙烷的体积分数为1%~4%时,不仅无法阻断爆炸火焰的传播,而且与对照组相比,会使火焰传播速度加快;当七氟丙烷的体积分数为1%~6%时,爆炸源及管道末端处的爆炸压力峰值随着七氟丙烷体积分数的增加而逐渐减小;当七氟丙烷的体积分数为3%时,抑爆区处的爆炸压力峰值与对照组相比增幅为10.9%。     

弹性板水下爆炸冲击载荷的修正虚拟流体方法分析

研究非接触水下爆炸中板结构厚度和密度对冲击载荷和空化演变的影响.将近期发展的修正的虚拟流体方法推广应用于处理可压缩流体与弹性板结构的非线性相互作用.研究发现,假设结构不发生断裂破坏,较小的板厚度或密度可以减弱爆炸波对结构的冲击,冲击载荷随着厚度或密度的增大非线性地趋向于固壁边界下的结果.而且较小的板厚度或密度可以促使空化较早形成,产生较大的空化区,并推迟和减弱空化破裂对结构的二次冲击.     

燃烧管内悬浮铝粉燃烧爆炸过程的研究

 铝粉的燃烧与加速机理一直是相关部门研究的热点。为了深入研究其在受限空间内的燃烧与传播特性,基于双流体模型、湍流k-ε模型以及铝粉燃烧等模型,选用SIMPLE格式,对大型卧式燃烧管内铝粉颗粒与空气的两相悬浮流湍流燃烧加速转爆炸现象进行了数值研究,得到了铝粉火焰在管内的燃烧传播过程中管内各相关参数的详细变化情况,并与相关的实验结果吻合。     

An analysis of peak overpressures in vented gaseous explosions

Experimental data from vented explosion tests using stoichiometric methane–air and 18% hydrogen–air mixtures in a 63.7 m³ chamber with a 2.7 or 5.4 m² vent are presented. Results from experiments conducted using stoichiometric propane–air in 2.42 m³ vessel with a 0.26 m² vent are also reported. The tests were focused on the effect of fuel, enclosure size, ignition location, vent size, and obstacles on the pressure development of a propagating flame in a vented enclosure. The dependence of the maximum pressure generated on the experimental parameters was analyzed. It was found that the pressure maxima may be caused by pressure transients controlled by the interplay of the maximum-flame area, the burning velocity, and the overpressure generated by an external explosion. A simple model was proposed to estimate the maximum pressure for each of the main pressure transients. The model was found to agree with the experimental data within the experimental uncertainty.     

Determining the resistance of X-pinch plasma

The current and the voltage of an X-pinch were measured. The inductance of the X-pinch was assumed to be a constant and estimated by the calculation of the magnetic field based on the well-known Biot-Savart's Law. The voltage of the inductance was calculated with L · di/dt and subtracted from the measured voltage of the X-pinch. Then, the resistance of the X-pinch was determined and the following results were obtained. At the start of the current flow the resistance of the exploding wires is several tens of Ohms, one order of magnitude, higher than the metallic resistance of the wires at room temperature, and then it falls quickly to about 1 , which reflects the physical processes occurring in the electrically exploding wires, i.e., a current transition from the highly resistive wire core to the highly conductive plasma. It was shown that the inductive contribution to the voltage of the X-pinch is less than the resistive contribution. For the wires we used, the wires' material and diameter have no strong influence on the resistance of the X-pinch, which may be explained by the fact that the current flows through the plasma rather than through the metallic wire itself. As a result, the current is almost equally divided between two parallel X-pinches even though the diameter and material of the wires used for these two X-pinches are significantly different.     

深水域近水面水下爆炸水柱形态及演变实验研究

 为研究不同起爆深度的水下爆炸水柱形态及演变特征,进行了1 kg球形RDX装药在不同起爆深度下的海上爆炸实验,通过高速摄像机记录装药起爆后水柱的形成和成长过程,获得了喷射水柱形态的演变特征以及水柱高度、直径、水柱突出水面时间等参数的变化规律,并与Cole、Hole和Swisdak等人的研究结果进行对比分析。研究结果表明：对于深水域近水面水下爆炸,水柱以垂直喷射形态为主,当气泡在膨胀阶段到达水面时水柱存在微弱的径向飞散现象;水柱最大高度随起爆深度呈脉动变化,水柱直径随起爆深度线性减小;Swisdak关于水柱最大高度的计算公式不适用深水域近水面水下爆炸情况。     

C20离子团簇在氧化物中穿行时库仑爆炸过程的理论研究

研究了C20团簇在几种金属氧化物(Al2O3,SiO2)中穿行时发生的库仑爆炸过程.采用线性介电响应理论,并结合Mermin形式的介电函数,得到了团簇中各组成离子的空间感应势,其中组成团簇中各组成离子的电荷分布情况由Brandt-Kitagawa有效电荷理论模型来描述.通过求解运动方程得到离子团结构随时间的演化过程,并采用Monte Carlo方法模拟了爆炸过程中的多重散射现象.我们发现,尾流效应使团簇的空间结构和电荷分布呈现非对称性.     

建筑物爆炸泄压的试验研究

本文报导了在1米~3和30米~3两个爆炸泄压试验装置内进行的360余次试验结果。证明了在有平行壁面的建筑物内发生的可燃气爆炸泄压过程中,声动不稳定燃烧压力峰P3是建筑物的主要破坏因素。试验表明,本文发展的一种爆炸减压板具有消除P3的效应。