The thermal effect in diode-end-pumped continuous-wave 914-nm Nd:YVO4 laser

The thermal effect and the heat generation in diode-end-pumped continuous-wave 914-nm Nd:YVO₄ lasers are investigated in detail. A theoretical model of a diode end-pumped solid-state laser is constructed to analyse the influence of fractional thermal loading on the thermal effect in the Nd:YVO₄ laser based on finite element analysis. The thermal focal lengths and the end-surface deformations of laser rods in Nd:YVO₄ quasi-three-level and four-level lasers are measured and compared with the results obtained by ordinary interferometry for the demonstration of higher thermal loading in 914-nm laser. Finally the fractional thermal loading in the Nd:YVO₄ quasi-three-level laser is calculated by matching the experimental and the simulated end deformations.     

冲击波后温度测量的理论问题

 本文讨论了冲击波后温度弛豫的理论方法。和R. Grover及P.A. Urtiew不同，采用了非傅里叶热传导理论，结果和实验十分符合，而实验结果用傅里叶热传导理论是无法解释的。当时间趋于无穷时，这两种方法的结果又趋于一致，文章中作了物理原因的解释。     

炸药水下爆炸能量输出特性试验研究

为了解炸药水中爆炸能量的输出特性,特别是冲击波能随距离的衰减规律,对有效比冲能进行了研究。经过理论推导发现,传统的有效比冲能计算公式仍然满足相似律。TNT炸药水下爆炸试验结果表明,炸药的有效比冲能、比气泡能和总能量的测量结果与经验公式计算结果吻合较好。通过对试验结果进行分析,拟合得到了有效比冲能随距离变化的趋势线。对比经验公式结果,发现在小药量试验中冲击波能随距离的衰减更明显。     

Determining the resistance of X-pinch plasma

The current and the voltage of an X-pinch were measured. The inductance of the X-pinch was assumed to be a constant and estimated by the calculation of the magnetic field based on the well-known Biot-Savart's Law. The voltage of the inductance was calculated with L · di/dt and subtracted from the measured voltage of the X-pinch. Then, the resistance of the X-pinch was determined and the following results were obtained. At the start of the current flow the resistance of the exploding wires is several tens of Ohms, one order of magnitude, higher than the metallic resistance of the wires at room temperature, and then it falls quickly to about 1 , which reflects the physical processes occurring in the electrically exploding wires, i.e., a current transition from the highly resistive wire core to the highly conductive plasma. It was shown that the inductive contribution to the voltage of the X-pinch is less than the resistive contribution. For the wires we used, the wires' material and diameter have no strong influence on the resistance of the X-pinch, which may be explained by the fact that the current flows through the plasma rather than through the metallic wire itself. As a result, the current is almost equally divided between two parallel X-pinches even though the diameter and material of the wires used for these two X-pinches are significantly different.     

深水域近水面水下爆炸水柱形态及演变实验研究

 为研究不同起爆深度的水下爆炸水柱形态及演变特征,进行了1 kg球形RDX装药在不同起爆深度下的海上爆炸实验,通过高速摄像机记录装药起爆后水柱的形成和成长过程,获得了喷射水柱形态的演变特征以及水柱高度、直径、水柱突出水面时间等参数的变化规律,并与Cole、Hole和Swisdak等人的研究结果进行对比分析。研究结果表明：对于深水域近水面水下爆炸,水柱以垂直喷射形态为主,当气泡在膨胀阶段到达水面时水柱存在微弱的径向飞散现象;水柱最大高度随起爆深度呈脉动变化,水柱直径随起爆深度线性减小;Swisdak关于水柱最大高度的计算公式不适用深水域近水面水下爆炸情况。     

飞秒激光氘团簇库仑爆炸引发核聚变的机理研究

在超强飞秒激光与氘团簇的相互作用中，利用库仑爆炸模型，分析了可以引发核聚变的高能氘核产生的机理，提出了氘离子团簇膨胀尺寸与时间的关系式，计算了多种尺寸的氘团簇库仑爆炸时氘核的动能以及氘团簇的解体时间． 关键词： 飞秒强激光 氘团簇 库仑爆炸 核聚变     

两亲性壳聚糖基聚合物碳点的合成及其在载药方面的应用

通过水热法合成了系列具有高荧光量子产率（42.9%）辛基化壳聚糖基两亲性聚合物碳点荧光材料。利用红外光谱、紫外吸收光谱、光电子能谱、透射电镜、X射线衍射及荧光光谱对聚合物碳点进行了表征。以阿霉素为模型药物,研究了聚合物碳点对阿霉素的载药性能。当辛基取代度为76.42%时,其最大载药量和包封率分别为49.6%与47.4%。在磷酸盐缓冲液中,载药纳米胶束呈前期快速释放,后期缓慢释放的双相特征。将载药纳米胶束与鼻咽癌细胞作用,发现其存活率随着载药纳米胶束加入量的增加而降低,说明该纳米胶束对鼻咽癌细胞有一定的抑制作用。总之,该聚合物碳点材料在药物载体与荧光示踪方面有潜在的应用价值。     

Fracture characteristics of concrete subjected to impact loading

This paper takes concrete as a four-phase composite made of the intact matrix and three mutually perpendicular groups of penny-shaped micro-cracks. The intact matrix is assumed to be elastic,homogeneous and isotropic,and the micro-cracks are penny-shaped. Combined with the failure mechanism of concrete subjected to impact loading,a dynamic constitutive model for concrete is developed based on Mori-Tanaka's average stress concept and Eshelby's equivalent inclusion theory. Experimental results show that concr...     

丝电爆过程的电流导入机理

丝电爆制备纳米粉时, 电流从电极导入金属丝的过程直接影响电极烧损和粉末中微米级大颗粒产生. 分别通过接触和气体放电两种方式导入电流进行电爆试验. 结果表明, 光测量装置检测到的丝端部光电流几乎与回路放电电流同时产生, 而中间位置的光电流则要滞后一段时间; 由探针收集的产物确定, 金属丝端部主要形成熔融粒子, 中间部分主要形成气相粒子. 分析可知, 接触方式导入电流时, 丝端部也存在气体放电现象, 大电流主要通过气体放电形成的等离子体导入. 等离子体对电流的旁路作用会阻碍能量向金属丝沉积, 这是产生微米级大颗粒和"积瘤"主要原因. 通过气体放电方式导入电流时, 电极烧损明显减轻, 并可以避免"积瘤"产生.     

危险货物零担运输多目标配装问题及遗传算法求解

零担货物具有运量零星、批数较多的特点,而危险货物又有混装的限制,所以危险货物零担运输配装问题一直是铁路部门复杂而急需解决的实际问题.在给出其数学模型的基础上,先对待装货物进行预处理,然后运用遗传算法对问题进行了求解,最后通过实例证明该方法的可行性和有效性.