Statistical treatment of proficiency testing data

 There are three stages to evaluating a laboratory's results in an interlaboratory proficiency test: establishing the correct result for the test item, determining an evaluation statistic for the particular result, and establishing an acceptable range. There are a wide variety of procedures for accomplishing these three stages and a correspondingly wide variety of statistical techniques in use. Currently in North America the largest number of laboratory proficiency test programs are in the clinical laboratory field, followed by programs for environmental laboratories that test drinking water and waste water. Proficiency testing in both of these fields is under the jurisdiction of the federal government and other regulatory and accreditation agencies. Many of the statistical procedures are specified in the regulations, to assure comparability of different programs and a fair evaluation of performance. In this article statistical procedures recommended in International Organization for Standardization Guide 43, Part 1, are discussed and compared with current practices in North America. Received: 22 April 1998 · Accepted: 12 May 1998     

磁性纳米标记检测技术在生物医学即时检测领域的研究进展

基于磁性纳米材料的磁标记检测技术具有灵敏度高、线性范围广、信号检测便捷等优点。由于生物样品自身磁背景信号极低,相比于光学标记检测技术,磁标记检测技术在蛋白质、核酸、细胞、病原体及生物组织检测中均表现出更高的灵敏度,在生物医学即时检测领域展现了良好的应用前景。该文围绕磁性纳米粒在即时检测领域的最新研究进展,重点介绍了其在蛋白质、核酸以及几类病原体检测方面的应用,并对基于磁性纳米粒的即时检测技术发展方向及应用前景进行了展望。     

The determination of adsorbable organically bound halogens (AOX) in soil: interlaboratory comparisons and reference materials

The interlaboratory variability in the quantification of adsorbable organically bound halogens (AOX) in industrially contaminated soil is presented. Three consecutive rounds of a proficiency testing scheme, in which between 88 and 119 routine laboratories participated, yielded relative reproducibility standard deviations between 7 and 20% at AOX contents between 10.9 and 268 mg kg⁻¹. Nineteen laboratories with established proficiency were invited to participate in the certification of the AOX content in three soil reference materials meant for the internal quality control in analytical laboratories. The certified values are (1349 ± 59) mg kg⁻¹, (80 ± 7) mg kg⁻¹ and (102 ± 8) mg kg⁻¹, respectively.     

灌注桩超声脉冲检测法和判据的研究

本文论述了钴孔灌注桩超声脉中检测法的原理、仪器和方法.分析了当超声脉冲穿过缺陷区时其传播时间、幅值(或衰减)以及接收信号波形所呈现的变化.提出了基于"声时—深度"曲线的缺陷定量判据.即声时差值与斜率乘积判据.该判据能估算缺陷的性质和大小.而且,若将该判据与"幅值—深度"曲线综合运用,则可提高检测和判断结果的精度.     

脂代谢及其与运动性疲劳的关系

脂肪是人体内贮存能量的最重要的物质之一,它比糖元的贮量大１０倍．近几年的研究表明,休息状态及进行低到中等强度的运动过程中脂肪供能有着重要的作用,尤其是运动持续时间长达３～４ｈ以上时,脂肪供能可以占到总能量代谢的７０％～９０％之多．人们采用许多手段和方法,以期增加运动时脂肪氧化供能的比例,节省体内糖消耗,提高机体耐力,但是并未能达到满意的效果．２０世纪８０年代一些新的研究结果表明,运动时脂肪供能也有其自身的种种限制,脂肪的过度动员会对人体的运动能力带来不利的影响,甚至是引起疲劳的重要原因     

科技进步统计监测软件系统的设计与实现

河北省科技进步统计监测软件系统以科技进步统计监测评价需求为指导,进行了合理的总体结构设计、系统功能设计、数据库设计、输入输出设计、存储设计,并在河北省大中型工业企业的科技进步统计监测评价中得到了应用。     

用IDX法测定马尾松和樟子松种子发芽能力的研究

研究用ＩＤＸ法测定马尾松和樟子松种子发芽能力的方法及其标准化。结果发现,马尾松和樟子松种子浸种１６ｈ后,在１５℃、相对湿度接近１００％的培养箱内培养５６ｈ,然后在２５℃、相对湿度４０％的条件下分别干燥３ｈ、２ｈ,再作射线摄影,此时生活种子与死亡种子含水量的差异能在射线照片上形成密度反差,据此可以测定种子的发芽能力,即生活种子含水量高,吸收射线能力强,在射线图象上表现为密度均匀,胚与胚乳界限不明显,     

两个不相交集合分组测试的最优过程

讨论了两台装置搜索两个坏硬币分组测试模型的（ｍ,ｎ）一问题,给出了最优测试过程,其测试次数从实质上 改进了测试次数的信息论界。     

Do proficiency tests always verify laboratories’ performance? The case of FAPAS PT 0270

In this paper, the case of FAPAS PT 0270 “Doramectin and Oxfendazole in Sheep Liver” is discussed. During evaluation of the data received from participants (determination of total, oxidised oxfendazole residue and calculation of the sum of oxfendazole and oxfendazole sulfone residues), significant differences were observed between the results obtained by use of two analytical approaches. This phenomenon can be explained by the route of oxfendazole metabolism, which results in the presence of fenbendazole in the sample. This was not predicted by the provider; consequently, not all the necessary tests on the material were conducted. Due to the high uncertainty of the z-scores in this test, the results of the PT cannot be used for purposes of evaluation, and the benefits of participation in PT 0270 are questionable.     

废弃线路板化学分析采样、制样及检测方法

介绍废弃线路板中有回收价值元素和有害物质分析的采样、制样及检测技术。样品经过分类采样、剪切破碎和高温灰化制样,采用样品全分析或副批混合样分析。通过提高称样量、多次测定求平均值的办法,火试金富集-重量法测定贵金属金、银。湿法王水溶解样品,碘量法测定主体元素铜。电感耦合等离子体发射光谱(ICP-AES)法测定其它杂质元素,被测元素质量浓度在0~10μg/mL范围内与光谱强度呈良好线性关系,相关系数均大于0.9998。测定结果的相对标准偏差小于10%(n=5),加标回收率为97.0%~102.5%。该方法简单、快速,有效地解决了线路板样品不均匀而难采样,以及硬度、韧性强制样难,金属易包裹难分解的技术瓶颈,测定结果准确,具有代表性。该方法适用于废弃线路板化学成分分析,其它废弃电子产品检测可参考此方法。