中国延边朝鲜族自治州的移民资本流动

显著的移民资本流动已经在南朝鲜与延边之间发生。延边当地政府支持劳动力移民,支持随后的汇款额利用所带来的渐进利益。官方对成功的移民者和他们同延边经济发展的整合不感兴趣。他们已经采取措施推动移民但是并没有出台有效的政策用以将新资本转移到延边,并将它们注入当地发展中。到目前为止重要的资源并没有被触及。     

与企业全方位深度融合建设精品专业

行业发展是专业建设的前提,与企业结合是专业建设的关键,与生产结合是专业建设的核心,与就业结合是专业建设的根本。航空制造业的快速发展需要大量的数控技术专业人才。数控技术专业的发展离不开与企业的良好合作。企业为专业建设注入活力,专业建设为企业发展提供保障。     

应用型高技能数控人才实训模式的研究——以井冈山大学工学院为例

本文介绍了应用型高技能数控人才的培养目标,从加大设备投入、安装通用软件、保证学生实践时间、建立一支高水平师资队伍、加强校企合作这些方面着手,建立了一套较为完善的实训模式,以增强学生的编程、操作、软件应用等方面的能力。     

山西省代县碾子沟金红石矿的成因分析

金红石在基性岩中是由于自变质作用和后期热液作用的结果,使矿体中金红石加富,该区矿床属岩浆矿床。介绍了代县碾子沟矿区金红石矿产的地质特征,就代县碾子沟矿区金红石矿的成矿原因进行了分析。     

Absorbing boundary conditions for reaction-diffusion equations

We treat here of the question of absorbing boundary conditionsfor nonlinear diffusion equations. We use the conditions designedfor the linear equation, we prove them to be well posed forthe nonlinear problem, and through numerical experiments thatthey are well suited for reaction–diffusion equations.     

潮流计算中的数学方法——牛顿—拉夫逊法

本文介绍了一种解非线性代数方程组的数学方法——牛顿-拉夫逊法,并将其应用于电力系统潮流计算中。采用本文方法的计算结果表明该教学方法在电力系统潮流问题中是收敛的;同时计算结果与电力专业软件的计算结果保持了一致,从而验证了结果的正确性。     

漳州某基坑抽水引起地面沉降的初探

由于基坑快速抽水导致基坑周边地面沉降。通过对场地因抽水引起地面沉降的计算和试抽水等方面的前期工作,分析了因基坑降水对地面沉降的影响,并据此来调整完善基坑降水方案,取得了明显的社会和经济效益。     

大学生对课外活动形式所持态度的调查与分析

体育课程不仅包括"课堂"教学,而且包括课堂外的各种教学活动。课外活动是体育课的必然延伸,在教师的指导下,有计划、有组织地开展好课外、校外体育活动,使学生具有体育锻炼的自觉性和自主锻炼的能力,是为学生终生体育打下基础的需要,是落实《全民健身计划》的需要。     

A novel tridentate nitrogen donor as ligand in copper catalyzed ATRP of methyl methacrylate

A tridentate ligand, BPIEP: 2,6‐bis[1‐(2,6‐diisopropyl phenylimino) ethyl] pyridine, having central pyridine unit and two peripheral imine coordination sites was effectively employed in controlled/“living” radical polymerization of MMA at 90°C in toluene as solvent, Cu^IBr as catalyst, and ethyl‐2‐bromoisobutyrate (EBiB) as initiator resulting in well‐defined polymers with polydispersities M_w/M_n ≤ 1.23. The rate of polymerization follows first‐order kinetics, k_app = 3.4 × 10^?5 s^?1, indicating the presence of low radical concentration ([P*] ≤ 10^?8) throughout the reaction. The polymerization rate attains a maximum at a ligand‐to‐metal ratio of 2:1 in toluene at 90°C. The solvent concentration (v/v, with respect to monomer) has a significant effect on the polymerization kinetics. The polymerization is faster in polar solvents like, diphenylether, and anisole, as compared to toluene. Increasing the monomer concentration in toluene resulted in a better control of polymerization. The molecular weights (M_n,SEC) increased linearly with conversion and were found to be higher than predicted molecular (M_n,Cal). However, the polydispersity remained narrow, i.e., ≤1.23. The initiator efficiency at lower monomer concentration approaches a value of 0.7 in 110 min as compared to 0.5 in 330 min at higher monomer concentration. The aging of the copper salt complexed with BPIEP had a beneficial effect and resulted in polymers with narrow polydispersitities and higher conversion. PMMA obtained at room temperature in toluene (33%, v/v) gave PDI of 1.22 (M_n = 8500) in 48 h whereas, at 50°C the PDI is 1.18 (M_n = 10,300), which is achieved in 23 h. The plot of lnk_app versus 1/T gave an apparent activation energy of polymerization as (ΔE^≠_app) 58.29 KJ/mol and enthalpy of equilibrium (ΔH⁰_eq) to 28.8 KJ/mol. Reverse ATRP of MMA was successfully performed using AIBN in bulk as well as solution. The controlled nature of the polymerization reaction was established through kinetic studies and chain extension experiments. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4996–5008, 2005     

Synthesis and refractive‐index control of fluoropolymers by the polyaddition of bis(epoxide)s and triazine di(aryl ether)s

The polyaddition of fluorine‐containing bis(epoxide)s and fluorine‐containing triazine di(aryl ether)s were examined to give the corresponding fluorine‐containing poly(cyanurate)s. It was observed that the synthesized fluoropolymers had good thermal stabilities and good film‐forming properties. The glass transition temperatures (T_g's) and refractive‐indices (n_D's) of synthesized polymers were determined by differential scanning calorimetry and ellipsometry, respectively, and it was found that the values of T_g's and n_D's were supported by their fluorine containing ratios and skeletons. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4421–4429, 2007