CZE separations of basic proteins at low pH in fused silica capillaries with surfaces modified by silane derivatization and/or adsorption of polar polymers

Mixtures of several basic proteins have been used to test CZE capillaries with surfaces modified by new pretreatment procedures; the performance obtained has been compared with that achieved using capillaries treated by procedures described in the literature. It has been shown that addition of non-ionic polyvinylalcohols (PVA) to CZE buffer solutions deactivates even bare, i.e. untreated, fused silica surfaces and renders them suitable for separations of basic proteins. The performance obtained from such surfaces was comparable with that of capillaries modified by the more elaborate procedures of etching, silanol derivatization, and/or adsorptive coating (again with polymers). A home-made device is described which enables derivatization and coating reactions to be performed on fused silica capillaries under an inert atmosphere, i.e. one free from oxygen and water.     

配体交换毛细管区带电泳拆分未衍生化氨基酸

以铜（Ⅱ）-L-谷氨酸络合物为手性分离选择剂，对苯丙氨酸、酪氨酸和色氨酸3种非衍生芳香族氨基酸的手性对映体拆分进行了研究，建立了一种快速、简便拆分未衍生化的氨基酸对映体的配体交换毛细管电泳方法。在使用10mmol／L NH4AC（pH5．0），5mmol／L CuSO4和10mmol／L L-谷氨酸的条件下，成功地拆分了苯丙氨酸、酪氨酸手性对映体；色氨酸手性对映体也得到部分分离；考察了电泳缓冲液组成、pH值等影响分离效果的因素。     

毛细管区带电泳法快速测定复方布洛芬片的有效成分

研究了用毛细管区带电泳法快速测定复方布洛芬片中布洛芬和伪麻黄碱含量的方法。在０．０２５ｍｏｌ／Ｌ的磷酸盐缓冲液（ｐＨ８．１）中，上述两组分可在３ｍｉｎ内得以完全分离，用紫外检测器在２１０ｎｍ处检测，并以外标法定量。１１次测定含有９．５ｍｇ／Ｌ盐酸伪麻黄碱和６６．７ｍｇ／Ｌ布洛芬的试样溶液，相对标准偏差为２．９％（伪麻黄碱）和１．９％（布洛芬），回收率为１０３．１％（伪麻黄碱）和９７．６％（布洛芬）。应用毛细管区带电泳法测定复方布洛芬片剂的含量，所得结果与ＨＰＬＣ法一致。     

Capillary electrophoresis: An integrated system with a unique split-flow sample introduction mechanism

The performance of an integrated capillary electrophoresis system with a novel split-flow sample injection mechanism and special high sensitivity UV absorbance detector is described. Sample introduction into the capillary is accomplished with a standard HPLC-type microliter syringe. The injected sample is divided proportionally between the separation capillary and an adjustable splitvent. The volume of sample introduced into the capillary can be manipulated by varying the length or the i.d. of the splitvent tubing; or the volume of sample injected. Data are presented showing reproducibility of retention time, peak height, and peak area; minimum detectability; and operation at short UV wavelengths.     

Poly(methacrylic acid-ethylene glycol dimethacrylate) monolith in-tube solid-phase microextraction applied to simultaneous analysis of some amphetamine derivatives in urine by capillary zone electrophoresis

A method based on in-tube solid-phase microextraction and capillary zone electrophoresis (CZE) was proposed for simultaneously determining four amphetamines (amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, and 3,4-methylenedioxymethamphetamine) in urine. A poly(methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column, which can provide sufficient extraction efficiency, was introduced for the extraction of amphetamines from urine samples. The hydrophobic main chains and acidic pendant groups of the monolithic column make it a superior material for extraction of basic analytes from aqueous matrix. After extraction, the samples were analyzed by CZE. The best separation was achieved using a buffer composed of 0.1 M disodium hydrogen phosphate (adjusted to pH 4.5 with 1 M hydrochloric acid) and 20% methanol v/v, with a temperature and voltage of 25 degrees C and 20 kV, respectively. By applying electrokinetic injection with field-amplified sample stacking, detection limits of 25-34 microg/L were achieved. Excellent method of reproducibility was found over a linear range of 0.1-5 mg/L. Determination of these analytes from abusers' urine sample was also demonstrated.     

Determination of imazalil by on-line coupled capillary isotachophoresis with capillary zone electrophoresis

A simple, rapid and reproducible capillary isotachophoretic on-line coupled with capillary zone electrophoresis (CITP-CZE) method for the determination of IMz in food packaging extracts and its residues in apples is described. A good separation of the IMZ from other sample constituents was achieved within 15 minutes without any sample clean up. Method characteristics (linearity, accuracy, intra-assay and detection limit) were determined. Less amount of time involved, sufficient sensitivity and low running cost are the important attributes of CITP-CZE method.     

Artificial neural networks for quantification in unresolved capillary electrophoresis peaks

The application of the combination of experimental design (ED) and artificial neural networks (ANNs) for the quantification of overlapped peaks in capillary zone electrophoresis is described. When the total separation cannot be achieved by separation techniques, the use of ED-ANN can be a suitable approach. The unstability of EOF causes peak shift that has to be corrected in order to apply ED-ANN methods. In this work, normalization procedure of electropherograms with consequent application of ANNs for quantification purpose was developed. Both, spectra and electropherograms can be used as multivariate data. In general, both kinds of data were found to be suitable for unresolved peaks quantification by ED-ANN approach.     

Thermal-Adsorptive Concentration

Methods for concentrating dilute fluids using adsorption followed by partial thermal regeneration were studied using the simulation package ADSIM. The systems studied were NaCl in liquid water on Amberlite XD-2 resin and benzene vapor in nitrogen on activated carbon. Cycles studied included counter-current regeneration with pure hot fluid, co-current regeneration with pure hot fluid, a new process called Hot Feed Addition (HFA) consisting of co-current regeneration with pure hot fluid followed by hot feed, and cycling zone adsorption (co-current alternating hot and cold feeds with no pure regeneration fluid). The optimum system depends upon the conditions of the system and the value function chosen to evaluate the systems. For example, for benzene in nitrogen with hot regeneration gas at 467.4 K, cycling zone adsorption used no carrier gas, had the most concentrated benzene stream and a very pure nitrogen product, but the energy use was greater than the other processes. For liquid systems counter-current operation could produce the purest product, but regenerant requirements were high. With slightly lower purity requirements HFA reduced solvent usage and increased the concentration of the concentrated waste stream. For the liquid system all processes used approximately 3% or less of the energy that would be required for evaporation.     

Determination of Size Distribution of Nano-particles by Capillary Zone Electrophoresis

A new method was developed for the determination of the size distribution of nano-particles by capillary zone electrophoresis (CZE). Scattering effect of nanoparticles was studied. This method for the determination of size distribution was statistical.