铽、铕-邻啡啰啉-芳香化合物三元配合物的合成和性质研究

本文对Ln(phen)(C₆H₅COO)₃、Ln(phen)₂P-(OC₆H₄CHO)₃·3H₂O.Ln(phen)₂P-(OC₆H₄COOC₂H₅)₃(Ln=Tb、Eu)固体配合物的制备和光谱性质进行了研究。根据元素分析、红外光谱、摩尔电导测定,X射线粉末衍射、热重差热分析以及紫外可见光谱确定了其组成及配位形式,并对其发光性能进行了研究。     

Strategies to enhance the enzymatic hydrolysis of pretreated softwood with high residual lignin content

Pretreatment of Douglas-fir by steam explosion produces a substrate containing approx 43% lignin. Two strategies were investigated for reducing the effect of this residual lignin on enzymatic hydrolysis of cellulose: mild alkali extraction and protein addition. Extraction with cold 1% NaOH reduced the lignin content by only approx 7%, but cellulose to glucose conversion was enhanced by about 30%. Before alkali extraction, addition of exogenous protein resulted in a significant improvement in cellulose hydrolysis, but this protein effect was substantially diminished after alkali treatment. Lignin appears to reduce cellulose hydrolysis by two distinct mechanisms: by forming a physical barrier that prevents enzyme access and by non-productively binding cellulolytic enzymes. Cold alkali appears to selectively remove a fraction of lignin from steam-exploded Douglas-fir with high affinity for protein. Corresponding data for mixed softwood pretreated by organosolv extraction indicates that the relative importance of the two mechanisms by which residual lignin affects hydrolysis is different according to the pre- and post-treatment method used.     

Liquid fluidized bed starter culture ofTrichoderma reesei for cellulase production

A starter culture ofTrichoderma reesei (Rut-C30) prepared in a liquid fluidized bed reactor (LFBR) gave better growth and greater cellulase production in submerged fermentation than a conventional shake flask inoculum. The LFBR starter was prepared by first coatingT. reesei spores to 0.25 mm size corncob (1.0x10⁸g^-1) in a medium containing 1.0% corncob, 0.5 gL^-1 xylose and 0.1 gL^-1 lactose in a balanced salt solution, then fluidizing the particles in the LFBR for 36 h to allow germination of the spores, and covering the particles with an approx 30 μm thick biofilm. This biofilm that developed in constant adherence to the lignocellulosic carrier, apparently became well adapted to grow rapidly on insoluble cellulose substrates (Solca Floc), and had the enzymes of the cellulase complex induced for increased cellulase production. The LFBR starter used in a stirred tank reactor (STR) gave 15 gL^-1 biomass production and 6.5 IU mL^-1 overall cellulase activity with a volumetric productivity of 64 IU L^-1h^-1 in a 5 d fermentation, compared with a 7 d shake flask inoculum that gave 11 gL^-1 biomass and 3.2 IU mL^-1 cellulase activity, with a volumetric productivity of 31IU L^-1h^-1. The LFBR starter culture retained its viability in dry storage for 6–9 mo.     

Functionalized naphthol[2,3-h] quinoline-7,12-diones

The addition of secondary and primary amines to ethyl (1-amino-9,10-anthraquinon-2-yl)propynoate affords an easily separable mixture of the corresponding ethyl 3-dialkylaminoor 3-alkylamino-3-(1-amino-9,10-anthraquinon-2-yl)acrylate and 3-dialkylamino- or 3-alkylaminonaphthol[2,3-h]quinoline-2(1H), 7,12-trione (in ∼4: 1 ratio). Intramolecular cyclization of the resulting substituted ethyl acrylates results in the formation of 4-dialkylaminoor 4-alkylamino-2-chlorinated pyridine rings. Subsequent nucleophilic substitution of the chlorine atom gives 2-functionalized 4-dialkylamino- or 4-alkylaminonaphtho[2,3-h]quinoline-7,12-diones. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2327–2332, November, 1998.     

Efficient synthesis of cellulose furoates in 1-<Emphasis Type="Italic">N</Emphasis>-butyl-3-methylimidazolium chloride

The ionic liquid 1-N-butyl-3-methylimidazolium chloride ([C₄mim]⁺Cl⁻) was investigated as reaction media for the homogeneous acylation of cellulose with 2-furoyl chloride in the presence of pyridine. The preparation of cellulose furoate depending on the reaction conditions, the cellulose type and the pyridine content was studied. Cellulose furoates with a degree of substitution in the range from 0.46 to 3.0 were accessible, i.e., under mild conditions, with a low excess of reagent and in a short reaction time. The products were characterized by elemental analysis, perpropionylation, ¹H- and ¹³C NMR spectroscopy and FTIR spectroscopy. Thomas Heinze is the member of the European Polysaccharide Network of Excellence (EPNOE), www.epnoe.eu     

Flow through Porous Media XVI: Electrokinetic Transport Coefficients of Aqueous Solutions of Mercuric Chloride and Glycine through a Sintered Disc Impregnated with a Cellulose Acetate Membrane under a Magnetic Field

The effect of the magnetic field on the electrokinetic transport coefficients (permeability coefficient and electro-osmotic permeability coefficient) of water and aqueous solutions of mercuric chloride and glycine through a sintered disc impregnated with cellulose acetate at different potentials, concentrations, and magnetic fields varying up to 21 kg/cm² are reported at 308.15 K. The phenomenological coefficients characterizing the electro-osmotic flow and the membrane characteristics are also estimated for the various solutions with the object of determining the efficiencies of electrokinetic energy conversion and ζ potential. The effect of magnetic field has been attributed to the molecular orientation of dipoles in solutions and to the change in the structure of the membrane.     

Synchrotron-radiated X-ray and neutron diffraction study of native cellulose

Precise determination of d-spacings and compositional ratio of cellulose I_α and I_β in various native cellulose samples was successfully carried out by synchrotron-radiated X-ray diffraction and time-of-flight (TOF) neutron diffraction from quasi-powder specimens. X-ray diffraction peaks were separated by the deconvolution method using six types of profile function: Gaussian, Lorentzian, intermediate Lorentzian, modified Lorentzian, pseudo-Voigt, and Pearson VII. In terms of R-factors, the pseudo-Voigt function gave the best fit with the observation, and was used for determination of d-spacings. The numerical results for Valonia cellulose were: dI_α (1 0 0) = 0.613 nm; dI_β (1 1 0) = 0.603 nm; dI_β (1 1 0) = 0.535 nm; dI_α (0 1 0) = 0.529 nm; I_α content = 0.65. The differences determined between dI_α (1 0 0) and dI_β (1 1 0) and between dI_β (1 1 0) and dI_α (0 1 0) were similar to those previously reported. Comparison between unresolved peaks for the two types of cellulose samples revealed a small but definite difference between dI_α (1 1 0) and dI_β (2 0 0). The TOF neutron diffractometry using deuterated samples confirmed this difference. This revised version was published online in August 2006 with corrections to the Cover Date.     

Electrocatalytic Determination of Ascorbic Acid at the Surface of 2,7‐Bis(ferrocenyl ethyl)fluoren‐9‐one Modified Carbon Paste Electrode

A chemically modified carbon paste electrode with 2,7‐bis(ferrocenyl ethyl)fluoren‐9‐one (2,7‐BFEFMCPE) was employed to study the electrocatalytic oxidation of ascorbic acid in aqueous solution using cyclic voltammetry, differential pulse voltammetry and chronoamperometry. The diffusion coefficient (D=1.89×10^?5 cm² s^?1), and the kinetic parameter such as the electron transfer coefficient, α (=0.42) of ascorbic acid oxidation at the surface of 2,7‐BFEFMCPE was determined using electrochemical approaches. It has been found that under an optimum condition (pH 7.00), the oxidation of ascorbic acid at the surface of such an electrode occurs at a potential about 300 mV less positive than that of an unmodified carbon paste electrode. The catalytic oxidation peak currents show a linear dependence on the ascorbic acid concentration and linear analytical curves were obtained in the ranges of 8.0×10^?5 M–2.0×10^?3 M and 3.1×10^?5 M–3.3×10^?3 M of ascorbic acid with correlation coefficients of 0.9980 and 0.9976 in cyclic voltammetry and differential pulse voltammetry, respectively. The detection limits (2δ) were determined to be 2.9×10^?5 M and 9.0×10^?6 M with cyclic voltammetry and differential pulse voltammetry, respectively. This method was also examined for determination of ascorbic acid in pharmaceutical preparations.     

Rapid analysis of free medium-chain fatty acids and related ethyl esters in beer using SPE and HRGC

A modification of a procedure by Hage [1] is proposed for the gas chromatographic evaluation of the content of free medium-chain fatty acids and related ethyl esters in beer. The method involves extraction of free fatty acids and ethyl esters by SPE using C₁₈ bonded phase columns, derivatization of free fatty acids and related ethyl esters with diazomethane, and GC analysis using an SP-2340 capillary column. The results obtained have shown the method to be rapid and highly reproducible. The technique has been compared with other methods used for determination of free fatty acids.     

A model explaining declining rate in hydrolysis of lignocellulose substrates with cellobiohydrolase I (cel7A) and endoglucanase I (cel7B) of Trichoderma reesei

It is commonly observed that the rate of enzymatic hydrolysis of solid cellulose substrates declines markedly with time. In this work the mechanism behind the rate reduction was investigated using two dominant cellulases of Trichoderma reesei: exoglucanase Cel7A (formerly known as CBHI) and endoglucanase Cel7B (formerly EGI). Hydrolysis of steam-pretreated spruce (SPS) was performed with Cel7A and Cel7B alone, and in reconstituted mixtures. Throughout the 48-h hydrolysis, soluble products, hydrolysis rates, and enzyme adsorption to the substrate were measured. The hydrolysis rate for both enzymes decreases rapidly with hydrolysis time. Both enzymes adsorbed rapidly to the substrate during hydrolysis. Cel7A and Cel7B cooperate synergistically, and synergism was approximately constant during the SPS hydrolysis. Thermal instability of the enzymes and product inhibition was not the main cause of reduced hydrolysis rates. Adding fresh substrate to substrate previously hydrolyzed for 24 h with Cel7A slightly increased the hydrolysis of SPS; however, the rate increased even more by adding fresh Cel7A. This suggests that enzymes become inactivated while adsorbed to the substrate and that unproductive binding is the main cause of hydrolysis rate reduction. The strongest increase in hydrolysis rate was achieved by adding Cel7B. An improved model is proposed that extends the standard endo-exo synergy model and explains the rapid decrease in hydrolysis rate. It appears that the processive action of Cel7A becomes hindered by obstacles in the lignocellulose substrate. Obstacles created by disordered cellulose chains can be removed by the endo activity of Cel7B, which explains some of the observed synergism between Cel7A and Cel7B. The improved model is supported by adsorption studies during hydrolysis.