Modeling and simulation of free radical polymerization of styrene under semibatch reactor conditions

The first part of this approach is concerned with the elaboration of a radical polymerization model of styrenne, based on a kinetic diagram that includes chemical and thermal initiation, propagation, termination by recombination and chain transfer to the monomer. Furthermore, volume contraction during polymerization is considered, as well as the gel and glass effects. The mathematical formalism that describes the model in terms of moments is explored in detail. The model was then used to predict the changes in monomer conversion and molecular weight after intermediate addition of initiator and monomer. The results of this operation are dependent on the conditions of the reaction mass, quantity, and moment of substance addition. Therefore, the simulations were performed at different times with respect to the gel effect; before, during and after this phenomenon, and also with respect to different temperatures and initiators. Increasing the initiator concentration before the gel effect leads to an earlier appearance of the phenomenon and to a decrease in molecular weight. The ratio reveals a polydispersity index smaller for the intermediate addition of initiator. No significant changes take place during or after the gel effect. If along with the initiator, unreacted monomver (used to dissolve the initiator) enters the reactor, a small dip in conversion is observed. The general conclusion of this paper reveals the intermediate addition of initiator as a method to control polymer properties and to prevent the “dead-end” polymerization of styrene.     

Thermodynamics of hydrogen-isotope-exchange reactions. Proton solvation inn-hexanol and water

This paper reports our results for the direct experimental determination of the equilibrium constant for the hydrogen-isotope-exchange reaction, 1/2D₂(g)+HCl(hexOH)=1/2H₂(g)+DCl(hexOD), where hexOH isn-hexanol and hexOD isn-hexanol with deuterium substitution in the alcohol function. The reaction was studied in electrochemical double cells without liquid junction for which the net cell reaction is the above isotope-exchange reaction. The experimentally determined value of ε° (296.0°K) for this cell is 4.03±0.95 mV (strong electrolyte standard states, mole-fraction composition scale); the value of the equilibrium constant for the reaction is 1.17±0.05. The contributions of isotope-exchange and transfer effects to the magnitude of the standard Gibbs energy change for the above reaction and for the analogous reaction 1/2D₂(g)+HCl(aq)=DCl(daq)+1/2H₂(g) are considered. Our results support the conclusion of Heinzinger and Weston that the formulation of the solvated proton in water as H₃O⁺, as opposed to H₉O₄ ⁺, is sufficient for the interpretation of the thermodynamics of hydrogen-isotope-exchange reactions in water. We also find that the formulation of the solvated proton inn-hexanol as ROH ₂ ⁺ is sufficient for the interpretation of our results on the thermodynamics of hydrogen-isotope-exchange inn-hexanol.     

Trends in the CNDO/2 molecular orbital study of electronic structure in some neurotransmitter drugs

An investigation of electronic structure in some neurotransmitter drugs has been made using the CNDO/2 semi-empirical molecular orbital method.The electronic structure has been conveniently characterized by the electronic parameters nett atomic population (NAP) and bond index (BI). A variation of these electronic parameters with respect to conformation has been studied and has been found unlikely to exceed 0.1 e in most. cases. Further, the useful extent to which the electronic parameters of some commonly occurring functional groups may be regarded as conformationally invariant has been demonstrated. Also presented are (i) a discussion on the intramolecular close-approach of functional groups — the interaction between terminal —COO^? and ?NH₃⁺ groups of α-ω anaino acids is explicitly considered; (ii) an enquiry into the extension of ‘standard’ (idealized) geometry models in the elucidation of electronic structure.The implication of the results and observations presented here are briefly discussed with reference to classical and quantum structure-activity studies of drug molecules.     

A study of the polarographic behaviour of meso-tetra(4-trimethylammoniumphenyl)porphine and its copper and magnesium complexes and its analytical applications

The investigation of the electrochemical reduction and the adsorption of meso-tetra(4-trimethylammoniumphenyl)porphine (T(4-TMAP)P) at a mercury electrode in alkaline solution shows that the overall reduction involves three two-electron steps, of which the first step is reversible and the latter two are irreversible. In addition, T(4-TMAP)P and its metal complexes of Cu(II) and Mg(II) can be strongly adsorbed on the surface of a mercury electrode. The adsorption phenomena have been utilized as a preconcentration step for the determination of trace amounts of the two ions by single sweep polarography. For copper, the detection limit is 1 × 10^–8 mol dm^–3, for magnesium, 1 × 10^–7 mol dm^–3, the latter being limited by the reagent blank. The proposed method was applied to the determination of Cu and Mg in various types of samples (chemicals, hair and liver tissues) with satisfactory results.     

Synthesis of α, ω perfluoropolyether iodides

Perfluoropolyether (PFPE) diacyl halides of formula XCOCF₂O[(CF₂O)_n(CF₂CF₂O)_m]_pCF₂COX, with X = Cl, F and molecular weight (MW) 400-4000 g mol⁻¹ are smoothly converted in high yields to the corresponding α, ω diiodides in the absence of solvent, employing KI or LiI at 210 °C with extrusion of CO. During the reactions, β-elimination of COF₂ from the terminal difluoromethylene oxide units (CF₂O, C₁ unit) occurs to some extent until a tetrafluoroethylene oxide unit (OCF₂CF₂, C₂ unit) is encountered yielding a OCF₂CF₂I terminus. This considerably alters the MW distribution of the final diiodide especially for low MW PFPEs. Operating in supercritical conditions of CO (scCO) or both scCO and CO₂ (scCO₂) on low (<600 g mol⁻¹) MW diacyl halides, lowers β-elimination from 95 to 52 mol% if KI is used or from 43 to 30 mol% if LiI is used. With higher MW (>600 g mol⁻¹) β-elimination is lowered from 15 to <1 mol% in scCO conditions employing KI.     

Structure of palladium quinoline-8-selenolate Pd(C9H6NSe)2

The molecular and crystal structure of palladium quinoline-8-selenolate Pd(C₉H₆NSe)₂ has been determined by X-ray structural analysis. The structures of the five-membered metallocycles of palladium 8-hydroxy-, 8-mercapto-, and 8-hydroselenoquinolinates of one type are compared. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 396–402, March, 2006.     

A comparison of phototautomerism in different sites of free-base porphin (H2P) in n-alkane crystals

Selective laser-induced phototautomerism of free-base porphin in different n-alkanes (n-hexane, n-heptane, n-octane, nnonane, n-decane, n-undecane and n-dodecane) has been used to identify tautomer splittings in a number of sites in polycrystalline samples at 2 K. Pairs or lines arising from the two molecular orientations in each site can be reversibly transformed into each other. In the odd n-alkanes the occupation of different sites was not dependent on the rate at which the samples were frozen, but in the even n-alkanes metastable sites were only occupied following rapid quenching.     

Compehensive two-dimensional gas chromatography (GC×GC) and its applicability to the characterization of complex (petrochemical) mixtures

In general, petrochemical products contain only a limited number of chemical classes of compounds (sample dimensionality). The enormous number of individual components within these classes, however, soon puts limitations upon a single chromatographic technique when it comes to adequate characterization of these products. Comprehensive two-dimensional gas chromatography (GC×GC) clearly opens the possibility of estimating the composition of hydrocarbon mixtures in a far more detailed fashion than hitherto possible. Although the emphasis of papers of GCxGC thus far almost exclusively applies to the unsurpassed peak-capacity, in the oil industry there is a need for characterization, rather than for analyzing all the individual compounds. In principle a GCxGC system can provide an almost perfect match between its intrinsic properties and the dimensionality of oil samples. To establish the applicability of GCxGC towards petrochemical analytical challenges, a commercially aavailable prototype instrument was subjected to an exhaustive characterization of a typical hydrocarbon precess stream and a fast characterization of a light gas oil. Although there are no fundamental limitations towards the quantitative aspects of a GCxGC system, this paper confines itself to qualitative results only. Quantitative aspects of GCxGC will be published in a forthcoming paper.     

Mechanical behaviour of biodegradable agricultural films under real field conditions

The mechanical behaviour of various types of biodegradable materials depends on their chemical composition and additives, the processing characteristics and the application conditions. The environmental conditions during storage and usage of these materials strongly influence their mechanical properties and behaviour. Ageing and degradation during the useful lifetime of biodegradable agricultural films causes losses in the mechanical performance of the material, as measured by monitoring the evolution of some of the critical mechanical properties. Such losses may be comparable to the corresponding losses of the conventional polyethylene agricultural films due to ageing, or they may be more drastic. In the present paper, the overall mechanical and ageing/degradation behaviour of experimental specially designed and manufactured low-tunnel and mulching biodegradable films, exposed to full-scale field conditions is analysed. Selected critical mechanical properties of these films manufactured with different grades of Mater-Bi material and additives, different thickness and processing schemes and exposed to real cultivation conditions in four different locations in Europe are investigated in the laboratory and compared against the corresponding behaviour of conventional agricultural films at various stages of their exposure time.     

Peculiarities of the effect of the electronic nature of substituents on the basic properties of aliphatic amines

Changes in the hybrid state of atomic orbitals of nitrogen and p-character of LEP, which occur under the effect of saturated hydrocarbon radicals and polar substituents in aliphatic amines, differ substantially. Therefore, the effect of the both substituents on the basicity constants of amines cannot be described by the single formal type of interaction. The anomalous changes in the basicity in the series of primary, secondary, and tertiary alkylamines, which are discussed in the literature, and the correlations pK _BH+ = f(*) and G _B = f(*) are, in fact, imaginary, because the alkyl radicals at the N atom do not manifest the electron-donor properties.