Correlated and non-correlated growth kinetics of pentacene in the sub-monolayer regime

We present a study of the growth kinetics of pentacene monolayer islands on SiO₂ in the submonolayer regime by using Atomic Force Microscopy (AFM). Two distinct growth modes, namely correlated growth (CG) and non-correlated growth (NCG), have been identified by Voronoi tesselation. These two modes are characterized by different island growth kinetics. In the case of correlated growth, the average island size 〈A〉 scales with deposition time t i.e. 〈A〉 ∝ t whereas for non-correlated growth, 〈A〉 ∝ t². The CG and NCG regimes are defined by the level of re-evaporation which determines the capture zones around the islands: Wigner-Seitz cells for CG and coronas of width λ_D (λ_D is the mean diffusion distance on SiO₂ before re-evaporation) for NCG. A simple model is proposed to reproduce the experimental growth kinetics in both modes.     

Structural studies of Cr-doped mullite derived from single-phase precursors

Cr-doped mullites were prepared from single-phase precursors containing up to 9.60 wt% Cr₂O₃ using a sol-gel technique followed by thermal treatment. Particle induced X-ray emission spectroscopy and X-ray powder diffraction were used to characterize the samples. Mullites were orthorhombic, space group Pbam. Cr doping caused the increase of unit-cell parameters. Strongest expansion was noticed along c-axis followed by a and b (Δc/c=0.089, Δa/a=0.061, Δb/b=0.045% per mole Cr₂O₃). A second phase, namely θ-(Al,Cr)₂O₃, was revealed by XRD in the sample containing 9.60 wt% Cr₂O₃. The structure of mullites was refined by the Rietveld method, location of Cr³⁺ was performed by the EPR spectroscopy. At low chromium doping level (Cr₂O₃ content less than ∼5 wt%) Cr³⁺ ions were substituted for Al³⁺ in the AlO₆ octahedra of the mullite structure (M1 site). For higher doping level, Cr³⁺ ions were additionally substituted for Al³⁺ in the AlO₆ octahedra of the second phase [θ-(Al,Cr)₂O₃ at 1400 °C, or α-(Al,Cr)₂O₃ at 1600 °C] which segregated in the system. Substitution of Cr³⁺ for Al³⁺ on M1 site in the mullite structure resulted in increase of average distances in (M1)O₆ octahedron and decrease of average distances in T*O₄ tetrahedron, while average distances in TO₄ tetrahedron stayed almost constant.     

油价波动对国民经济影响模型构建与应用

为了科学构建原油价格波动与国民经济发展的关系,在借鉴国内外专家学者相关模型基础上,考虑不同国民经济指标对油价波动的时滞反馈等因素,构建油价波动对国民经济影响模型.利用原油价格波动对国民经济发展的动态模型,对模型的各部分关系系数进行确定,最后根据所得到的模型对国民经济影响进行实际分析与预测,并得出规避油价波动影响风险的措施.     

中亚热带南部与北部的亮叶水青冈林的比较研究--Ⅰ. 种组成、结构及更新

采用Braun-Blanquet,Fujiwara的植物社会学方法，对分布于中亚热带北部的八大公山及中亚热带南部的南山的亮叶水青冈林进行了植被生态学的比较研究，两个群落被区分．并比较了两群落的种组成、结构及生长更新的特征。     

The steady state growth rate of a recrystallization front in regions of heterogeneous dislocation density

The paper investigates whether a change from a homogeneous to an inhomogeneous dislocation distribution, assumed to be caused by a slight additional deformation, can lead to an increase of the recrystallization temperature of a deformed metal. In this case, the higher temperature would indicate a more stable deformation structure despite the increase of stored energy. The recrystallization temperature is related to the growth rate. Hence, the steady state velocity of a recrystallization front moving either parallel or vertically to the stripes of a simplified two-dimensional heterogeneous dislocation distribution of parallel sections of higher and lower dislocation densities is calculated. The results show that if a front growths through the high and low density sections in series an overall slower rate despite higher mean dislocation density is, indeed, possible. However, growing in the parallel arrangement always leads to a higher growth rate compared with the homogeneous case of slightly less stored energy. Since in a real structure the faster growth is likely to succeed, the recrystallization temperature observed will be lowered with additional deformation in accordance with experimental experience.     

An efficient lasing action from pyrromethene 556 dye-doped organically modified silicates

Organically modified solid-state silicates (ORMOSILS) doped with a new laser dye 1,3,5,7,8-pentamethylpyrromethene-2,6-disulfonate-BF₂ complex (pyrromethene 556) have been synthesized by a sol-gel method and the compositional effects on pore characteristics, fluorescence and lasing properties have been investigated. It is found that the use of dimethylsulfoxide and γ-glycidoxypropyltrimethoxysilane could greatly change the structure properties of sol-gel derived ORMOSILS cage, and thus the fluorescence and lasing properties of the materials could improve significantly. A successful laser oscillation from this dye-doped ORMOSILS sample has been achieved upon pumping with a Q-switched frequency-doubled Nd:YAG laser at 532 nm. A slope efficiency of 54% with a useful lifetime greater than 10,000 shots has been demonstrated at a pump repetition rate of 1 Hz and a pump intensity of 1 J/cm² by using the new ORMOSILS cage on our newly designed laser system. Our results have shown that it is possible to obtain a high-efficiency with a long-lifetime for a compact new laser device by low cost dye-doped solid-state ORMOSILS.     

水电工程规划设计方案的自动生成及评价

本文介绍了在水电工程规划设计时，如何利用三次自然样条插值函数在有限个方案的基础上自动生成无限多个方案，然后采用多目标综合决策模型在其中选择最优方案的一种方法．文中还给出了程序流程，并以某水电站正常蓄水位选择作为实例，对方法进行了验证，结果与专家决策完全吻合．     

Synthesis and characterization of novel thermoresponsive‐co‐biodegradable hydrogels composed of N‐isopropylacrylamide,poly(L‐lactic acid), and dextran

A series of novel multifunctional hydrogels that combined the merits of both thermoresponsive and biodegradable polymeric materials were designed, synthesized, and characterized. The hydrogels were copolymeric networks composed of N‐isopropylacrylamide (NIPAAM) as a thermoresponsive component, poly(L‐lactic acid) (PLLA) as a hydrolytically degradable and hydrophobic component, and dextran as an enzymatically degradable and hydrophilic component. The chemical structures of the hydrogels were characterized by an attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) technique. The hydrogels were thermoresponsive, showing a lower critical solution temperature (LCST) at approximately 32 °C, and their swelling properties strongly depended on temperature changes, the balance of the hydrophilic/hydrophobic components, and the degradation of the PLLA component. The degradation of the hydrogels caused by hydrolytic cleavage of ester bonds in the PLLA component was faster at 25 °C below the LCST than at 37 °C above the LCST, determined by the ATR–FTIR technique. Due to their multifunctional properties, the designed hydrogels show great potential for biomedical applications, including drug delivery and tissue engineering. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5054–5066, 2004     

多孔混凝土的强度特性

同普通混凝土一样，强度是多孔混凝土硬化后的主要力学性质，进行多孔混凝土基层路面结构设计、材料组成设计以及施工质量检测时，均需采用各种强度指标进行评价。多孔混凝土属于骨架空隙结构，其强度取决于内部起胶结作用的水泥石性质、集料特性及浆集比等。试验结果表明：多孔混凝土抗压强度早期增长较快，符合线性关系，后期强度发展较慢，符合对数关系；长龄期劈裂强度与28d劈裂强度之间符合对数关系；42．5级水泥多孔混凝土与32．5级水泥多孔混凝土的抗压强度之间存在良好的线性相关性。此外，多孔混凝土弯拉强度与抗压强度及劈裂强度与抗压强度之间均存在相关性良好的幂指数关系，并据此得出相应的对应关系表，便于工程实际应用。     

论农业经济增长方式的转变与发展农村职教

农业增长方式的转变使原本落后的农村职教面临着新的挑战。针对目前农村职业技术教育存在的问题,分析农业经济增长方式转变对农村职教的影响,进而提出新形势下发展农村职教的对策。