湿式催化氧化处理含高浓度甲醛的草甘膦废水

草甘膦结晶母液经蒸发或纳滤浓缩回收后,产生大量含有高浓度甲醛的废水,常规的废水处理方法难以达到回用或排放要求.以过量溶液浸渍法制备的Pt-Bi-CeO2/AC为催化剂,采用湿式催化氧化法处理2.5%的HCHO溶液,HCHO去除率高达99.9%以上,COD去除率达到96.6%.采用Pt-Bi-CeO2/AC催化剂对含低浓度草甘膦(PMG,50 mg/L)的生产废水直接进行湿式催化氧化处理,催化剂使用23次后,HCHO去除率稳定在85%左右,COD去除率稳定在87%左右,催化剂具有良好的稳定性.湿式催化氧化处理后的废水可直接回用于PMG生产.采用固定床湿式催化氧化装置处理HCHO溶液以及PMG生产废水,处理效果也非常理想,连续使用720 h,催化剂的稳定性能良好.通过XRD、N2吸附-脱附、HRTEM、ICP-OES和XPS等分析手段对催化剂进行了系统表征.     

Synthesis and application of silica and calcium carbonate nanoparticles in the reduction of organics from refinery wastewater

Oil refinery is one of the fast growing industries across the globe and it is expected to progress in the near future. The worldwide increase in the generation of refinery wastewater along with strict environmental regulations in the discharge of industrial effluent, persistent efforts have been devoted to recycle and reuse the treated water. The wastewater from the refining operation leads to serious environmental threat to the ecosystem. Therefore, this study aimed to synthesize silica (SiO₂) and calcium carbonate nanoparticles (CaCO₃) in the reduction of organics from refinery wastewater. The synthesized nanoparticles were employed in the reduction of chemical oxygen demand (COD) from refinery wastewater by studying the influence of solution pH, contact time, dosage of nanoparticles and stirring speed on adsorption performance. From the batch experimental studies, the optimized processing conditions for the reduction of COD using SiO₂ nanoparticles are pH 4.0, dosage 0.5 g, stirring speed 125 rpm and 90 min stirring time, and the corresponding values for CaCO₃ nanoparticles are pH 8.0, dosage 0.4 g, stirring speed 100 rpm and 90 min stirring time. The study demonstrates that SiO₂ and CaCO₃ nanoparticles have a promising future in the reduction organics from refinery wastewater in different pH regimes.     

New low-cost tubular ceramic microfiltration membrane based on natural sand for tangential urban wastewater treatment

In wastewater treatment, the development of low-cost separation methods is of significant importance. Low-cost membranes based on natural materials have become a highly active research topic in recent years. Herein, using low-cost natural Moroccan sand, new ceramic supports have been developed and characterized using different techniques such as X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), differential thermal analysis (DTA), along with scanning electron microscope (SEM). Plastic paste (average particle size ≤125 µm) was blended with organic additives and water, then the obtained paste was extruded into porous tubular supports. The support had a porosity of 43%, water permeability of 1928 L/h m² bar, excellent chemical and mechanical properties and an average pore diameter in the range of 8–15 µm after firing at 950 °C/2 h. As per SEM analysis, the tubular supports had a smooth and crack-free surface. The slip casting process was used to create a microfiltration layer from the same natural sand powder (average particle size ≤63 µm) using a mixture of powder sand, water, and polyvinyl alcohol solution. The water permeability of the microfiltration membrane sintered at 950 °C/2 h was 1052 L/h m² bar, the average pore size diameter was about 0.90 µm and 82% of pores had a diameter ≤1.00 µm. The obtained microfiltration membrane was tested for the treatment of urban wastewater. The membrane showed excellent separation performance in turbidity removal and chemical oxygen demand.     

Determination of 38 antibiotics in raw and treated wastewater from swine farms using liquid chromatography-mass spectrometry

The present study firstly aimed at developing a multi-residue method to identify and quantify 38 veterinary antibiotics (belonging to five different classes) not only for raw swine wastewater but also for wastewater differently treated by different units. The proposed method is based on a solid-phase extraction procedure and ultra high performance liquid chromatography with mass spectrometry. For sample preparation, the optimal loading sample volume was selected as 50 mL, the pH of which was adjusted to approximately 3.0 using formic acid. Then 0.1 g/L ethylenediaminetetraacetic acid disodium salt was added. The recovery rates for different types of wastewaters were in the range of 35.94–124.51% and the relative standard deviations were in the range of 0.36–14.62%. All the matrix standard curves exhibited high linearity (0.9956–0.9999). The matrix effects for the target antibiotics ranged from –61.73 to +148.75%. To ensure the practicality of the method, we performed the detection of the actually added concentration to determine method detection limits and quantitation limits. The quantitation limits of most of the target antibiotics were 0.04 μg/L, except for spiramycin (0.1 μg/L) and roxithromycin (0.2 μg/L). This optimized and validated method was applied to analyze antibiotic residues in swine water samples from four swine farms.     

Selective separation of trace nickel(II) and gold(I) ions via hollow fiber supported liquid membrane enhanced by synergistic extractants D2EHPA/TBP

This work presents the selective and simultaneous separation of nickel (Ni²⁺) and gold ([Au(CN)₂]⁻) ions, in trace amounts, from alkaline solution via hollow fiber supported liquid membrane (HFSLM) technique. HFSLM is challengingly carried out in real rinse wastewater generated by the ENIG plating process. The influence of various chemical parameters, including the type of extractant and their concentrations, molar ratios of mixed extractant as well as type of strippant, are also studied. The organophosphorus extractant mixtures of D2EHPA and TBP provide a synergistic effect for target Ni²⁺ ions but has an antagonistic effect as regards the extraction of non-target [Au(CN)₂]⁻ ions. Compared to other inorganic acids, HCl is seen to be the most suitable strippant for the selective stripping. Results demonstrate that percentages of extraction and stripping of Ni²⁺ ions achieved 85.7 and 83.2%, respectively. In contrast, percentages of extraction and stripping of non-target [Au(CN)₂]⁻ ions attained 15.6 and 1.94%.     

Using Design of Experiments to Optimize a Screening Analytical Methodology Based on Solid-Phase Microextraction/Gas Chromatography for the Determination of Volatile Methylsiloxanes in Water

Volatile methylsiloxanes (VMSs) constitute a group of compounds used in a great variety of products, particularly personal care products. Due to their massive use, they are continually discharged into wastewater treatment plants and are increasingly being detected in wastewater and in the environment at low concentrations. The aim of this work was to develop and validate a fast and reliable methodology to screen seven VMSs in water samples, by headspace solid-phase microextraction (HS-SPME) followed by gas chromatography with flame ionization detection (GC-FID). The influence of several factors affecting the extraction efficiency was investigated using a design of experiments approach. The main factors were selected (fiber type, sample volume, ionic strength, extraction and desorption time, extraction and desorption temperature) and optimized, employing a central composite design. The optimal conditions were: 65 µm PDMS/Divinylbenzene fiber, 10 mL sample, 19.5% NaCl, 39 min extraction time, 10 min desorption time, and 33 °C and 240 °C as extraction and desorption temperature, respectively. The methodology was successfully validated, showing low detection limits (up to 24 ng/L), good precision (relative standard deviations below 15%), and accuracy ranging from 62% to 104% in wastewater, tap, and river water samples.     

Supercritical Carbon Dioxide-Based Processes in Photocatalytic Applications

Conventional methods generally used to synthesize heterogeneous photocatalysts have some drawbacks, mainly the difficult control/preservation of catalysts’ morphology, size or structure, which strongly affect the photocatalytic activity. Supercritical carbon dioxide (scCO₂)-assisted techniques have recently been shown to be a promising approach to overcome these limitations, which are still a challenge. In addition, compared to traditional methods, these innovative techniques permit the synthesis of high-performance photocatalysts by reducing the use of toxic and polluting solvents and, consequently, the environmental impact of long-term catalyst preparation. Specifically, the versatility of scCO₂ allows to prepare catalysts with different structures (e.g., nanoparticles or metal-loaded supports) by several supercritical processes for the photocatalytic degradation of various compounds. This is the first updated review on the use of scCO₂-assisted techniques for photocatalytic applications. We hope this review provides useful information on different approaches and future perspectives.     

Application of Natural Clinoptilolite for Ammonium Removal from Sludge Water

Sludge water (SW) arising from the dewatering of anaerobic digested sludge causes high back loads of ammonium, leading to high stress (inhibition of the activity of microorganisms by an oversupply of nitrogen compounds (substrate inhibition)) for wastewater treatment plants (WWTP). On the other hand, ammonium is a valuable resource to substitute ammonia from the energy intensive Haber-Bosch process for fertilizer production. Within this work, it was investigated to what extent and under which conditions Carpathian clinoptilolite powder (CCP 20) can be used to remove ammonium from SW and to recover it. Two different SW, originating from municipal WWTPs were investigated (SW1: c₀ = 967 mg/L NH₄-N, municipal wastewater; SW2: c₀ = 718–927 mg/L NH₄-N, large industrial wastewater share). The highest loading was achieved at 307 K with 16.1 mg/g (SW1) and 15.3 mg/g (SW2) at 295 K. Kinetic studies with different specific dosages (0.05 g_CLI/mg_NH4-N), temperatures (283–307 K) and pre-loaded CCP 20 (0–11.4 mg/g) were conducted. At a higher temperature a higher load was achieved. Already after 30 min contact time, regardless of the sludge water, a high load up to 7.15 mg/g at 307 K was reached, achieving equilibrium after 120 min. Pre-loaded sorbent could be further loaded with ammonium when it was recontacted with the SW.     

Adsorptive Removal of Cd,Cu, Ni and Mn from Environmental Samples Using Fe3O4-Zro2@APS Nanocomposite: Kinetic and Equilibrium Isotherm Studies

In this study, Fe₃O₄-ZrO₂ functionalized with 3-aminopropyltriethoxysilane (Fe₃O₄-ZrO₂@APS) nanocomposite was investigated as a nanoadsorbent for the removal of Cd(II), Cu(II), Mn (II) and Ni(II) ions from aqueous solution and real samples in batch mode systems. The prepared magnetic nanomaterials were characterized using X-ray powder diffraction (XRD), scanning electron microscopy/energy dispersion x-ray (SEM/EDX) Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). Factors (such as adsorbent dose and sample pH) affecting the adsorption behavior of the removal process were studied using the response surface methodology. Under optimized condition, equilibrium data obtained were fitted into the Langmuir and Freundlich isotherms and the data fitted well with Langmuir isotherms. Langmuir adsorption capacities (mg/g) were found to be 113, 111, 128, and 123 mg/g for Cd, Cu, Ni and Mn, respectively. In addition, the adsorption kinetics was analyzed using five kinetic models, pseudo-first order, pseudo-second order, intraparticle diffusion and Boyd models. The adsorbent was successfully applied for removal of Cd(II), Cu(II), Mn (II) and Ni(II) ions in wastewater samples.     

MOFs/水凝胶复合材料的制备及其应用研究

金属有机框架(MOFs)具有大量的孔隙结构和活性位点,在气体吸附、催化、医疗等领域均发挥了巨大的作用。MOFs是晶体粉末,具有脆性较大、在水中易分解和不易回收等缺点,从而限制了其应用。通过MOFs与柔性高分子的复合,特别是与水凝胶的复合,极大地改善了复合材料的柔顺性、可回收和可加工性等特性,进一步拓宽了MOFs的应用领域。本文详细阐述了基于水凝胶MOFs原位生成法、MOFs /水凝胶同时生成法和水凝胶包裹MOFs法等三种不同方法制备MOFs/水凝胶复合材料的研究进展,并对上述三种制备方法的特点及其产物特征进行了总结,进一步归纳了复合材料在生物医药、催化、废水处理和气体吸附等领域的应用。最后,对MOFs/水凝胶复合材料制备方法的改进和复合材料应用前景进行了深入讨论和展望。