A RAPID APPROXIMATION FOR PREDICTING THE HYDROCARBON DISCOVERY RATE: PART 1. ASSESSING THE ACCURACY

The hydrocarbon discovery prediction problem is important to firms having to make decisions about the deployment of scarce exploration resources. Traditional methods for estimating the discovery rate rely on the completion of time consuming simulation experiments. A rapid approximation that does not require the completion of simulation exists and has been shown to have some promise as a prediction tool. This paper investigates the accuracy of the approximation method under a wide variety of distributional and drilling efficiency assumptions. The results indicate that the approximation produces predictions close to those of simulation under most of the tested conditions. This suggests that resource exploration firms could conveniently use the method for a wide variety of planning purposes without incurring the same costs in time and personnel required for simulation.     

复线电气化区段施工感应电对人体的危害及防护对策

感应电会对人体造成伤害。从电磁感应和静电感应原理入手，分析了产生感应电的过程，并就如何防止感应电的危害提出了防护对策，有一定实用价值。     

介观耗散互感耦合电路的库仑阻塞效应

给出了介观耗散互感耦合电路的量子化方法,并在介观电路中电荷量子化的基础上给出了介观耗散互感耦合电路的库仑阻塞条件.     

Deposition conditions in tailoring the morphology of highly porous reticular films prepared by electrostatic spray deposition (ESD) technique

Spongy-like reticular structure is a unique morphology fabricated by electrostatic spray deposition (ESD) technique. The effects of solvent, substrate temperature, precursor feeding rate, static electric field strength, and deposition time on tailoring the reticular structure were investigated. Scanning electron microscopy was used to observe the film morphology. MnO_x or LiMn₂O₄ were selected as the model materials. It is found that in addition to the conventional solvent butyl carbitol, other kinds of solvents such as ethylene glycol and propylene glycol can also be used to obtain reticular films at a suitable substrate temperature. Porous films with a low cross-linking degree pore structure can be prepared by increasing precursor feeding rate or decreasing substrate temperature. Increasing the deposition time or the electric field strength helps to obtain reticular films with more homogeneous pore size distribution. In addition, the addition of a high boiling-point solvent in mixed alcohol solvent results in the increase of proper substrate temperature. It is concluded that the fluidity of the spray droplets on the surface of a hot substrate is an important factor to form a reticular film.     

Mössbauer effect study of the decagonal quasicrystal Al65Co15Cu20

The ⁵⁷Fe Mössbauer effect study at 5.0 K and in an external magnetic field of 9.0 T on a high-quality stable decagonal quasicrystal Al₆₅Co₁₅Cu_19.9Fe_0.1 is presented. It is shown that the iron atoms are located in two distinct classes of sites. The values of the principal component of the electric field gradient tensor and the asymmetry parameter at these sites are, respectively, ?1.90(10)?×?10²¹ V/m², 0.97(15) and ?3.95(12)?×?10²¹ V/m², 0.00(17).     

小区暖气失调原因调查和改造方案的实施

通过对镇苑小区采暖情况的跟踪调查及数据采集，找出了供暖系统不热的原因，据此对系统进行了针对性的改造，取得了良好的改造效果。     

表面传导电子发射显示器件电场分布的理论研究

利用电磁理论对表面传导电子发射显示器件的单个子像素在笛卡尔坐标系内建立合理的电学物理模型，对内部电场强度和电势进行了深入研究，推导出了模型不同部分的面电荷密度、电场强度和电势的表达式.为了形象地表征其电学特性，利用MATLAB 6.5对电场强度和电势的分布情况进行了模拟，从理论上对模拟曲面给出了合理的解释，分析了子像素内部电子的发射机理和电学行为，并与电子多重散射模型和惯性离心模型进行了对比，解释了SED阳极电流形成的重要原因.在误差允许的范围内，本模型有关电场强度分布的结论与惯性离心模型一致. 关键词： 表面传导电子发射显示 遂穿效应 面电荷密度 电场强度     

柱形分布的电荷产生的电势

将无限长线电荷看成二维平面上的一个“源”,利用电势叠加原理计算了无限长柱形均匀分布的电荷产生的电势.这些柱体的截面电荷分布包括可解析表示和不可求解表示两种,后者可以通过数值计算给出结果.因此这种方法实际上可以计算任意截面柱形电荷分布的电势.通过计算,展示了各种电荷分布所产生电场的特性和共同特征.     

导体壳内外的电场彼此独立的简易证明

本文提供了一种证明导体壳的内外电场彼此独立的简易方法.     

三峡钢丝绳卷扬全平衡式垂直升船机机电耦合系统动力学仿真

建立三峡钢丝绳卷扬全平衡式垂直式升船机的双闭环调速电力拖动控制系统的模型和升船机各子结构的动力学模型，并通过刚性子结构法形成了整体动力学模型，运用MATLAB中的SIMULINK模块，将电力拖动控制系统与整体动力学模型耦合，采用Wilson-θ法求解瞬态响,对误载水深为＋20cm，承船厢低点位置上向上启动运动的正常工况进行了仿真分析。