A C + + computational environment for biomolecular sequence management

The wide production of biomolecular data of the last 30 years, mainly due to the rapid evolving of technologies as well as to the accomplishment of the Genome Projects, led to the necessity of appropriate computational approaches for data storage, manipulation and analyses, giving place to a fast evolving area of Biology: Computational Biology or Bioinformatics.We propose here a new method for the storage of the sequences and their analyses using the C + + programming language, checking the effectiveness of an object oriented approach for new models, suitable to manage data representation and analyses, to improve the efficiency of computational methodologies to solve problems of general interest in bioinformatics. We developed a framework with the aim to decrease the computational costs for the storage and some basic manipulations of nucleic acid sequences. The remarkable reduction of memory requirements with no loss of efficiency makes this approach a first well promising step in order to get a more efficient environment for the manipulation and the management of nucleic acid data sets, in a field of research with hard challenges for Computer and Life Sciences.Mathematics Subject Classification: 68U99G. Toraldo, via Universita’ 100, 80055 Portici, Napoli, Italy     

一维应变压缩下TC4钛合金绝热剪切研究

 利用内径为57 mm的压缩气炮，在撞击速度为0.2~1.2 km/s（相应的靶中压力为3~15 GPa）范围内进行对称碰撞实验，以研究TC4（Ti-Al6-V4）钛合金在一维应变冲击压缩条件下的绝热剪切现象。对回收得到的受冲击样品，在扫描电镜（SEM）下进行细观金相分析。结果指出，一维应变冲击压缩条件下，TC4钛合金中绝热剪切带产生的对称碰撞速度阈值为500 m/s（相当于样品中的压力为5.87 GPa）；主剪切带与冲击方向约为45°角，带上有圆形和椭圆形两种孔洞且随碰撞速度的增大而增多和长大，这是典型的韧性损伤特征。随碰撞速度增大，产生与主剪切带成15°角的支剪切带。这些与理论预言相符。X射线能谱分析结果指出，剪切带内材料发生了(α+β)→β相的转变，是典型的相变带。剪切带的温度估算与实验提供的信息吻合。     

关于混凝土多边形非均匀受压区的等效矩形应力图探讨

本文首先分析推导出了混凝土多边形非均匀受压区等效矩形应力图的特征值，然后利用这些特征值对钢筋混凝土双向偏心受压构件的承载力进行简化计算，并与两个试验结果进行比较，计算值与试验值吻合较好。     

基于Karhunen-Loève变换和小波谱特征矢量量化的三维谱像数据压缩

提出了基于Karhunen Lo埁ｖｅ变换的小波谱特征矢量量化三维谱像数据压缩方法耍幔颍瑁酰睿澹?Lo埁ｖｅ变换 /小波变换 /小波谱特征矢量量化方法应用了Karhunen Lo埁ｖｅ变换的消除谱相关性优良性能 ,应用二维小波变换消除空间相关性 ,在小波变换域内应用二维集分割嵌入块编码和一维谱特征矢量量化对三维谱像数据压缩 ,获得较高的压缩性能。实验结果表明 :Karhunen Lo埁ｖｅ变换 /小波变换 /小波谱特征矢量量化编码比Karhunen Lo埁ｖｅ变换 /小波变换 /改进对块零树编码和Karhunen Lo埁ｖｅ变换 /小波变换 /快速矢量量化编码方法在同样压缩比条件下 ,峰值信噪比提高 2dB和 1dB以上 ,而速度提高了 1.5和 8倍 ,整体压缩性能有较大的提高     

确定SHPB实验中延迟时间的曲线拟合法

 利用已知的试件密度，用预估的透射波与实测的透射波进行早期形状比较，确定试件弹性波速度，进而确定了SHPB试验数据处理时的延迟时间。     

Probing proton halo of the exotic nucleus28S by elastic electron scattering

Elastic electron scattering on the exotic light nucleus²⁸S is investigated in the plane wave Born approximation. The variation of the squared form factors of²⁸S with momentum transfer is compared with that of³²S. It is found that the behavior of the form factors near the second minimum (with a moderate momentum transfer) is sensitive to the alteration of the charge density distribution of halo protons in²⁸S. This indicates that elastic electron scattering can be a good probe of the structure of proton-halo nuclei.     

A fully linear-time approximation algorithm for grammar-based compression

A linear-time approximation algorithm for the grammar-based compression is presented. This is an optimization problem to minimize the size of a context-free grammar deriving a given string. For each string of length n, the algorithm guarantees approximation ratio without suffix tree construction.     

应用弹性振杆筛板对圆振筛进行改造的初步试验

论述了弹性振杆筛的工作原理,通过对现有圆振筛的改造,阐明了弹性振杆筛在解决湿煤细筛分过程中的作用,并指出了存在的问题及今后的努力方向。     

轴线起爆式螺线管型爆磁压缩发生器理论模型

 对轴线起爆式螺线管型爆磁压缩发生器进行了理论模型研究，建立了爆炸管的一维爆轰驱动模型、螺线管内空间磁场强度分布模型、爆炸管外表面磁压力模型和发生器系统的等效电路模型等，对此类发生器的物理过程进行系统描述。在此基础上，编制了相应的零维数值模拟程序CEMG 1.0，利用该程序分别对四种不同模型参数的发生器进行了理论计算和参数优化，并对其中一模型发生器爆炸管外表面的磁压力及其引起的剩余电感进行了计算，给出了剩余电感与初始输入条件及负载电感的关系，从而得到该模型的输出性能极限。对理论模型的正确性进行了实例验算证明。