Facile fabrication of anatase TiO2 microspheres on solid substrates and surface crystal facet transformation from {001} to {101}

Anatase TiO(2) microspheres with controlled surface morphologies and exposed crystal facets were directly synthesized on metal titanium foil substrates by means of a facile, one-pot hydrothermal method without use of any templating reagent. The obtained products were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelecron spectroscopy (XPS), and the focused ion beam (FIB) technique. The sizes of the resultant microspheres ranged from 1.1 to 2.1 μm. The transformation of anatase TiO(2) microspheres with exposed {001} facets surface to nanosheets surface with {101} facets was achieved by simply controlling the hydrothermal reaction time. The anatase TiO(2) microspheres with exposed square-shaped plane {001} facets were obtained by controlling the reaction time at 1 h. The prolonged reaction time transforms the anatase TiO(2) microspheres with exposed square-shaped plane {001} facets to eroded {001} facets then to a nanosheet surface with exposed {101} facets. With hydrothermal synthesis, the surface morphological structure and crystal facets formation are highly dependent on dissolution/deposition processes, which can be strongly influenced by attributes, such as pH of the reaction media, the total concentration of dissolved and suspended titanium species, and the concentration of fluoride in the reaction solution. The changes of these attributes during the hydrothermal process were therefore measured and used to illustrate the morphology and crystal-facet transformation processes of anatase TiO(2) microspheres. The surface morphologies and crystal-facet transformations during hydrothermal processes were found to be governed by the compositional changes of the reaction media, driven by dynamically shifted dissolution/deposition equilibria. The photocatalytic activities of the photoanodes made of anatase TiO(2) microspheres were evaluated. The experimental results demonstrated that the photocatalytic activity of anatase TiO(2) microspheres with exposed {001} facets was found to be 1.5 times higher than that of the anatase TiO(2) microspheres with exposed {101} facets.     

Maintaining the predictive abilities of multivariate calibration models by spectral space transformation

In quantitative on-line/in-line monitoring of chemical and bio-chemical processes using spectroscopic instruments, multivariate calibration models are indispensable for the extraction of chemical information from complex spectroscopic measurements. The development of reliable multivariate calibration models is generally time-consuming and costly. Therefore, once a reliable multivariate calibration model is established, it is expected to be used for an extended period. However, any change in the instrumental response or variations in the measurement conditions can render a multivariate calibration model invalid. In this contribution, a new method, spectral space transformation (SST), has been developed to maintain the predictive abilities of multivariate calibration models when the spectrometer or measurement conditions are altered. SST tries to eliminate the spectral differences induced by the changes in instruments or measurement conditions through the transformation between two spectral spaces spanned by the corresponding spectra of a subset of standardization samples measured on two instruments or under two sets of experimental conditions. The performance of the method has been tested on two data sets comprising NIR and MIR spectra. The experimental results show that SST can achieve satisfactory analyte predictions from spectroscopic measurements subject to spectrometer/probe alteration, when only a few standardization samples are used. Compared with the existing popular methods designed for the same purpose, i.e. global PLS, univariate slope and bias correction (SBC) and piecewise direct standardization (PDS), SST has the advantages of implementation simplicity, wider applicability and better performance in terms of predictive accuracy.     

Synthesis of New 2‐Phenylpyrano[3,2‐b]phenothiazin‐4(6H)‐one Derivatives

A new synthesis of 2‐phenylpyrano[3,2‐b]phenothiazin‐4(6H)‐one derivatives was reported. First 2,10‐diacetyl‐3‐hydroxyphenothiazine ( 2 ) was converted into their benzoyloxy esters ( 3a – 3j ) using different aromatic carboxylic acids in the presence of phosphorous oxychloride in pyridine. Benzoyloxy esters were converted into their 1,3‐diones ( 4a – 4j ) by using dry KOH in pyridine via Baker‐Venkataraman transformation reaction. The 1,3‐diones thus obtained were cyclised to pyranophenothiazines ( 5a – 5j ) by refluxing in an acetic acid/HCl mixture.     

Comparison of Planar and 3‐D Interdigitated Electrodes as Electrochemical Impedance Biosensors

It has been reported that the introduction of a dielectric barrier between adjacent digits of an interdigitated electrode array can improve the sensitivity of the array as an electrochemical impedance biosensor. Here we present an in‐depth analysis of the impedance in planar interdigitated electrodes and 3‐D interdigitated electrodes (with dielectric barriers). The analysis indicates that the planar geometry not only provides lower impedance but also a higher change impedance as a result of molecular immobilization on the electrode array surface.     

Studies on the Synthesis and Characterization of Pd?TiO2?SiO2 Nanocomposite for Electroanalytical Applications

A nanocomposite of Pd? TiO₂? SiO₂ is developed through a sol‐gel process from the reaction products of titanium isopropoxide followed by mixing the same with palladium linked 3‐glycidoxypropyltrimethoxysilane. The reaction product is sonicated and calcinated to obtain the nanocomposite of Pd? TiO₂? SiO₂. The calcination at 600 °C yielded an amorphous structure whereas at 900 °C it resulted into a nanocrystalline structure. The nanocomposite of palladium was further characterized by TEM, XRD, IR and EDS. The material acts as an efficient electrocatalyst. Electrocatalysis of ascorbic acid is observed at 0.1 V vs. Ag/AgCl, shows linearity between 1 µM and 1 mM in 0.1 M phosphate buffer (pH 7.0).     

Application of complementary mass spectrometric techniques to the identification of ketoprofen phototransformation products

Ketoprofen (KP) is a nonsteroidal anti-inflammatory drug, which during UV irradiation rapidly transforms into benzophenone derivatives. Such transformation products may occur after topical application of KP, which is then exposed to sunlight resulting in a photo-allergic reaction. These reactions are mediated by the benzophenone moiety independently of the amount of allergen. The same reactions will also occur during wastewater or drinking water treatment albeit their effect in the aqueous environment is yet to be ascertained. In addition, only a few such transformation products have been recognised. To enable the detection and structural elucidation of the widest range of KP transformation products, this study applies complementary chromatographic and mass spectrometric techniques including gas chromatography coupled to single quadrupole or ion trap mass spectrometry and liquid chromatography hyphenated with quadrupole-time-of-flight mass spectrometry. Based on structural information gained in tandem and multiple MS experiments, and on highly accurate molecular mass measurements, chemical structures of 22 transformation products are proposed and used to construct an overall breakdown pathway. Among the identified transformation products all but two compounds retained the benzophenone moiety--a result, which raises important issues concerning the possible toxic synergistic effects of KP and its transformation products. These findings trigger further research into water treatment technologies that would limit their entrance into environmental or drinking waters.     

Multiple unknown degradants generated from the insect repellent DEET by photoinduced processes on TiO2

This paper deals with the photocatalytic transformation of N,N-diethyl-m-toluamide (DEET), one of the most widespread and efficient mosquito repellents, under simulated solar irradiation using titanium dioxide as the photocatalytic source of oxidizing species. The investigation involved monitoring of the DEET decomposition, the identification of intermediate compounds and the assessment of mineralization. High-resolution mass spectrometry was employed to assess the evolution of the photocatalyzed process over time. Fifty-one main species were identified after DEET transformation. Several isomeric species were formed and were characterized by analyzing MS and MS(n) spectra in full, and by comparison with parent molecule fragmentation pathways. In the DEET molecule, the initial transformation involved mono- and polyhydroxylation followed by oxidation of the alcohol groups, cleavage of the alkyl chains or ring opening. All these intermediates are easily degraded and DEET is completely mineralized after 4 h of irradiation. Microtox bioassay (Vibrio fischeri) was employed to evaluate the ecotoxicity of solutions treated by photocatalysis.     

A characterization of Möbius transformations by use of hyperbolic regular polygons

In this paper we present a new characterization of Möbius transformations by use of hyperbolic regular polygons.     

Darboux transformation and explicit solutions for the integrable sixth-order KdV equation for nonlinear waves

Korteweg-de Vries (KdV)-type equations can describe some physical phenomena in fluids, nonlinear optics, quantum mechanics, plasmas, etc. In this paper, with the aid of symbolic computation, the integrable sixth-order KdV equation is investigated. Darboux transformation (DT) with an arbitrary parameter is presented. Explicit solutions are derived with the DT. Relevant properties are graphically illustrated, which might be helpful to understand some physical processes in fluids, plasmas, optics and quantum mechanics.