Elastic-plastic analytical solutions for an eccentric crack loaded by two pairs of anti-plane point forces

IntroductionTheelastic_plasticanalysisforacrackedplatewithfinitedimensionsisoneofthemostdifficultfieldsofelastic_plasticmechanics .Thenearcracklineanalysismethod ,whichwasfirstproposedbyAchenbachetal.[1,2 ] ,hasbeenimprovedbyYiinRefs.[3,4 ].InRefs.[3,4 ],…     

静电支承球形转子的恒速控制

本讨论静电支承球形转子的恒速控制问题。首先,介绍静电支承系统的基本工作原理,其次,建立静电支承系统的动力学模型。第三,分析采用PID控制器的支承刚度,第四,阐述形成静电旋转力矩的原理。最后,提出利用静电力恒速的方案与基本限制条件。     

静压气体球轴承支承球形转子的干扰力矩分析

中心小孔供气单向受载球面气体轴承可以用于球形转子的静平衡测量。对作用于转子上的干扰力矩进行估算是平衡装置设计的重要部分。本在一定假设条件下推导了由粘性剪切应力和气膜支撑力引起的作用于转子上的干扰力矩。干扰力矩以轴承包角、中心气室张角、气膜压力、转子转速、转子旋转轴位置、失中度、转子非球表示。以干扰力矩最小为准则分析了这些参数的影响，结论有助于静平衡装置的优化设计以及对精度的进一步分析。     

裂纹转子分岔、混沌行为研究

分析非线性涡动中裂纹转子在裂纹存在和裂纹扩展两种情形下的典型非线性动力学行为--混沌和分岔现象.在2/3倍临界转速区,裂纹深度浅于R/2的裂纹转子有分岔和拟周期响应出现;深度超过R/2的裂纹转子会出现分岔及混沌现象.裂纹角β对这些非线性动力学行为有很大影响.     

求解转子系统突加不平衡响应方法的研究

本文提出并研究了用传递函数分析法求转子系统的突加不平衡响应,讨论了求这一响应的最佳数值积分方法。用本文提出的理论解方法及三种常用的数值积分法:尤拉后差法,纽马克法,及呼伯特法,对一模型转子算例进行了分析计算,结果表明;尤拉后差法最适用于求转子系统的突加不平衡响应。本文提出的传递函数分析法,可以和试验模态分析方法相结合,以求解复杂转子系统的突加不平衡响应。     

A numerical method on estimation of stable regions of rotor systems supported on lubricated bearings

ＩｎｔｒｏｄｕｃｔｉｏｎＷｈｅｎｃｏｎｔｒｏｌｌｉｎｇｔｈｅｄｙｎａｍｉｃｓｔａｂｉｌｉｔｙｏｆｌａｒｇｅｒｏｔａｔｉｎｇｍａｃｈｉｎｅｒｙ ,ｎｏｔｏｎｌｙｔｈｅｐｒｏｂｌｅｍｗｈｅｔｈｅｒｅｑｕｉｌｉｂｒｉｕｍｓｔａｔｅｏｆｔｈｅｓｙｓｔｅｍｉｓｓｔａｂｌｅｍｕｓｔｂｅｓｏｌｖｅｄ ,ｂｕｔａｌｓｏｔｈｅｒｅｇｉｏｎｏｆａｓｙｍｐｔｏｔｉｃｓｔａｂｉｌｉｔｙｎｅｅｄｔｏｂｅｄｅｔｅｒｍｉｎｅｄ .Ｗｈｅｎｔ→∞ ,ｓｏｌｕｔｉｏｎｓｕｎｄｅｒｉｎｉｔｉａｌｃｏｎｄｉｔｉｏｎｓｗｉｔｈｉｎｓｕｃｈｒｅ…     

Extrusion of pastes with a piston extruder for the determination of the local solid and fluid concentration, the local porosity and saturation and displacement profiles by means of NMR imaging

 Nuclear Magnetic Resonance (NMR) was used to investigate the extrusion behaviour of PTFE pastes in a ram extruder. By means of ¹H-NMR imaging (MRI) it is possible to determine the local proton density and therefore, the local fluid concentration. The ¹⁹F-MRI provides the local solid concentration. Thus the local saturation and the local porosity can be calculated with the information of the local fluid and solid concentration. Furthermore displacement profiles can be derived from NMR images by means of correlation techniques without any preparation or marking of the pastes. Received: 8 May 2000   Accepted: 1 May 2001     

Stabilized finite element method for flows with multiple reference frames

We present a space‐time finite element method capable of dealing with flows in multiple co‐rotating reference frames. Since equal order interpolation is used for all degrees of freedom, Galerkin/least‐squares stabilization is applied. We give a detailed derivation of the equations involved, introduce the variational form, present the stabilization parameters, and also discuss implementation issues. Numerical examples in 2D and 3D show generality and efficiency of the method, if steady‐state behavior of rotating components is sufficient for the CFD analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Influence of periodic excitation on self-sustained vibrations of one disk rotors in arbitrary length journals bearings

Interaction of forced and self-sustained vibrations of one disk rotor is described by nonlinear finite-degree-of-freedom dynamical system. The shaft of the rotor is supported by two journal bearings. The combination of the shooting technique and the continuation algorithm is used to study the rotor periodic vibrations. The Floquet multipliers are calculated to analyze periodic vibrations stability. The results of periodic motions analysis are shown on the frequency response. The quasi-periodic motions are investigated. These nonlinear vibrations coexist with the periodic forced vibrations.     

动静叶栅优化改型及其性能分析

本文对动静叶栅分别进行优化改型,并对改型前后叶栅的气动性能进行数值分析。动静叶栅的优化改型基于正反问题相结合的流函数方法,性能分析一方面基于单排叶栅定常粘性流动的数值计算,另一方面基于动静叶栅相互干扰非定常粘性流动的数值计算。算例结果表明,经过优化改型后的动静叶栅的气动性能,无论在定常流动条件下还是在非定常流动条件下,相比改型前均有较大幅度的改善。