冲击载荷下剪切断裂研究

利用Hopkinson压杆技术对单边平行双裂纹试样倒向加载，在较大的加载率范围，对Ti6Al4V钛合金和40CrNiMoA两种材料的动态剪切断裂行为进行了研究．实验结果表明：存在两类韧性剪切断裂模式，即常规的韧性剪切型断裂和绝热剪切断裂．常规剪切型断裂模式的断裂韧性KⅡd随加载率的提高而增大，而绝热剪切型的断裂韧性KⅡd则随加载率的提高而减小，并且，当加载率增大至某一临界值时，常规的韧性剪切断裂模式将转变为绝热剪切断裂破坏模式．     

Subgame Consistent Cooperative Solutions in Stochastic Differential Games

Subgame consistency is a fundamental element in the solution of cooperative stochastic differential games. In particular, it ensures that: (i) the extension of the solution policy to a later starting time and to any possible state brought about by the prior optimal behavior of the players would remain optimal; (ii) all players do not have incentive to deviate from the initial plan. In this paper, we develop a mechanism for the derivation of the payoff distribution procedures of subgame consistent solutions in stochastic differential games with transferable payoffs. The payoff distribution procedure of the subgame consistent solution can be identified analytically under different optimality principles. Demonstration of the use of the technique for specific optimality principles is shown with an explicitly solvable game. For the first time, analytically tractable solutions of cooperative stochastic differential games with subgame consistency are derived.     

动态规划在教学管理中的应用

本将动态规划理论应用于高校教学管理当中，得出了教学管理中重要的环一排课的最优策略。     

Analysis of a Duopoly Supply Chain and its Application in Electricity Spot Markets

This paper studies a supply chain consisting of two suppliers and one retailer in a spot market, where the retailer uses the newsvendor solution as its purchase policy, and suppliers compete for the retailer’s purchase. Since each supplier’s bidding strategy affects the other’s profit, a game theory approach is used to identify optimal bidding strategies. We prove the existence and uniqueness of a Nash solution. It is also shown that the competition between the supplier leads to a lower market clearing price, and as a result, the retailer benefits from it. Finally, we demonstrate the applicability of the obtained results by deriving optimal bidding strategies for power generator plants in the deregulated California energy market. Supported in part by RGC (Hong Kong) Competitive Earmarked Research Grants (CUHK4167/04E and CUHK4239/03E), a Distinguished Young Investigator Grant from the National Natural Sciences Foundation of China, and a grant from Hundred Talents Program of the Chinese Academy of Sciences.     

Zur Synthese und Struktur von K3N

Synthesis and Structure of K₃N Two phases in the binary system K/N have been obtained via co‐deposition of potassium and nitrogen onto polished sapphire at 77 K and subsequent heating to room temperature. The powder diffraction pattern of one of these phases can be satisfactorily interpreted by assuming the composition K₃N, and the anti‐TiI₃ structure‐type, which is also adopted by Cs₃O. The resulting hexagonal lattice constants are: a = 779.8(2), c = 759.2(9) pm, Z = 2, P6₃/mcm. Comparison with possible structures of K₃N generated by computational methods and refined at Hartree‐Fock‐ and DFT level, reveals that the energetically most favoured structure has not formed (presumable Li₃P‐type), but instead one of those with very low density. In this respect, the findings for K₃N are analogous to the results on Na₃N. The thermal evolution of the deposited starting mixture has been investigated. Hexagonal K₃N transforms to another K/N phase at 233 K. Its XRD can be fully indexed resulting in an orthorhombic cell a = 1163, b = 596, c = 718 pm. Decomposition leaving elemental potassium as the only residue occurs at 263 K.     

Qualitative Theory and Identification of Dynamic System with One Degree of Freedom

Dynamic systems described by nonlinear differential equations of the second order are studied. It is assumed that certain preliminary information on the dissipative or elastic characteristics of systems is known. A new approach is demonstrated to obtaining full information on unknown or partially known characteristics of a system from measurements of not only displacements but also velocities and accelerations __________ Published in Prikladnaya Mekhanika, Vol. 41, No. 6, pp. 139–143, June 2005.     

Existence results for second order boundary value problem of impulsive dynamic equations on time scales

In this paper, Schaefer's fixed point theorem and nonlinear alternative of Leray-Schauder type are used to investigate the existence of solutions for second order boundary value problem for impulsive dynamic equations on time scales.     

On the tribological characteristics of dynamically loaded journal bearing with micropolar fluids

The addition of the additives to the lubricant oil to enhance the characteristics of the lubricant will influence the performance of the bearings. Based on the theory of micropolar fluids, the tribological characteristics of a dynamically-loaded journal bearing are numerically studied. Comparisons are made between the Newtonian fluids and the micropolar fluids. It is shown that for a dynamically-loaded journal bearing, the micropolar fluids yield an increase not only in the friction force, but also in the friction coefficient. In addition, the oil film pressure and the oil film thickness are obviously higher than that of Newtonian fluids.     

Predicting vibration signals of automobile engine using chaos theory

Condition monitoring and life prediction of the vehicle engine is an important and urgent problem during the vehicle development process. The vibration signals that are closely associated with the engine running condition and its development trend are complex and nonlinear. The chaos theory is used to treat the nonlinear dynamical system recently. A novel chaos method in conjunction with SVD (singular value decomposition)denoising skill are used to predict the vibration time series. Two types of time series and their prediction errors are provided to illustrate the practical utility of the method.     

Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.