Performance improvement of amorphous indium–gallium–zinc oxide ReRAM with SiO2 inserting layer

In this study, the resistive switching performance of amorphous indium–gallium–zinc oxide (a-IGZO) resistive switching random-access memory (ReRAM) was improved by inserting a thin silicon oxide layer between silver (Ag) top electrode and a-IGZO resistive switching layer. Compared with the single a-IGZO layer structure, the SiO₂/a-IGZO bi-layer structure exhibits the higher On/Off resistance ratio larger than 10³, and the lower operation power using a smaller SET compliance current. In addition, good endurance and excellent retention characteristics were achieved. Furthermore, multilevel resistance states are obtained through adjusting SET compliance current and RESET stop voltage, which shows a promise for high-performance nonvolatile multilevel memory application.     

Effect of twin boundary on nanoimprint process of bicrystal Al thin film studied by molecular dynamics simulation

The effects of a twin boundary(TB) on the mechanical properties of two types of bicrystal Al thin films during the nanoimprint process are investigated by using molecular dynamics simulations.The results indicate that for the TB direction parallel to the imprinting direction,the yield stress reaches the maximum for the initial dislocation nucleation when the mould directly imprints to the TB,and the yield stress first decreases with the increase of the marker interval and then increases.However,for the TB direction perpendicular to the imprinting direction,the effect of the TB location to the imprinting forces is very small,and the yield stress is greater than that with the TB direction parallel to the imprinting direction.The results also demonstrate that the direction of the slip dislocations and the deformation of the thin film caused by spring-back are different due to various positions and directions of the TB.     

Phenylboronate‐diol crosslinked polymer/SWCNT hybrid gels with reversible sol–gel transition

This work demonstrates the successful incorporation of functionalized single‐walled carbon nanotubes (f‐SWCNTs) into the phenylboronate‐diol crosslinked polymer gel to create a hybrid system with reversible sol–gel transition. The phenylboronic acid‐containing and diol‐containing polymers were first separately prepared by the reversible addition–fragmentation chain transfer polymerization. Covalent functionalization of single‐walled carbon nanotubes (SWCNTs) with an azide‐derivatized, diol‐containing polymer was then accomplished by a nitrene addition reaction. Subsequently, the hybrid gels were prepared by crosslinking the mixture of f‐SWCNTs and diol‐containing polymer with the phenylboronic acid‐containing polymer. The hybrid gel has been characterized by scanning electron microscopy (SEM) and rheological analysis. The SEM measurement demonstrated a homogeneous dispersion of f‐SWCNTs within the gel matrices. Rheological experiments also demonstrated that the hybrid gel exhibited storage moduli significantly higher than those of the native gel obtained from the phenylboronic acid‐containing and diol‐containing polymers. The hybrid gel can be switched into their starting polymer (f‐SWCNTs) solutions by adjusting the pH of the system. Moreover, the hybrid gel revealed a self‐healing property that occurred autonomously without any outside intervention. By employing this dynamic character, it is possible to regenerate the used gel, and thus, it has the potential to perform in a range of dynamic or bioresponsive applications Copyright © 2013 John Wiley & Sons, Ltd.     

Structure‐Based Design of Inhibitors of the Aspartic Protease Endothiapepsin by Exploiting Dynamic Combinatorial Chemistry

Structure‐based design (SBD) can be used for the design and/or optimization of new inhibitors for a biological target. Whereas de novo SBD is rarely used, most reports on SBD are dealing with the optimization of an initial hit. Dynamic combinatorial chemistry (DCC) has emerged as a powerful strategy to identify bioactive ligands given that it enables the target to direct the synthesis of its strongest binder. We have designed a library of potential inhibitors (acylhydrazones) generated from five aldehydes and five hydrazides and used DCC to identify the best binder(s). After addition of the aspartic protease endothiapepsin, we characterized the protein‐bound library member(s) by saturation‐transfer difference NMR spectroscopy. Cocrystallization experiments validated the predicted binding mode of the two most potent inhibitors, thus demonstrating that the combination of de novo SBD and DCC constitutes an efficient starting point for hit identification and optimization.     

新型复合共沉淀法制备高能量/高功率型锂离子二次电池用5V正极材料LiNi_(0.5)Mn_(1.5)O_4及其电化学性能

在传统的固相法的基础上开发了新型复合共沉淀法制备LiNi0.5Mn1.5O4材料.新型复合共沉淀法采用(NH4)2CO3和(NH4)2C2O4共同作为沉淀剂,通过控制共沉淀反应条件,得到了具有均匀球形形貌的沉淀物颗粒.再通过与饱和氢氧化锂溶液的水热反应及高温反应,最终制备出具有球形次级形貌和纯相尖晶石结构的LiNi0.5Mn1.5O4材料.电化学测试表明,制备的LiNi0.5Mn1.5O4具有优异的电化学性能,其初始容量达到了141.4mAh·g-1.在0.3C、1C和3C倍率下经过200次循环后的容量分别为136.0 mAh·g-1(96.3%)、128.6 mAh·g-1(94.4%)和113.9 mAh·g-1(91.1%).通过高温反应及特殊的冷却处理,LiNi0.5Mn1.5O4在4.0 V低压区平台的容量损失得到了有效抑制.更重要的是,通过控制合成过程中的关键步骤,可实现半定量化控制材料结构中的原子有序排布程度,进而得到具有高能量密度和高功率密度的两种LiNi0.5Mn1.5O4材料,其能量密度和功率密度分别达到了648.6 mWh·g-1和7000 mW·g-1以上.     

Self‐assembled Dynamic 3D Fingerprints in Liquid‐Crystal Coatings Towards Controllable Friction and Adhesion

Chiral‐nematic polymer network coatings form a “fingerprint” texture through self‐assembly. For this purpose the molecular helix of the coating is oriented parallel to the substrate. The coating has a flat surface but when actuated by light in the presence of a copolymerized azobenzene compound, 3D fingerprint structures appear in the coating. The helix forms protrusions at the positions where the molecules are aligned parallel to the surface and withdraws at the positions where the orientation is perpendicular. This process proceeds rapidly and is reversible, that is, the fingerprint‐shaped protrusions disappear when the light is switched off. The texture in the on‐state resembles that of a human fingerprint and is used to manipulate the gripping friction of a robotic finger. The friction coefficient drops by a factor of four to five when the fingerprint switched on because of reduced surface contacts.     

Controlling Covalent Connection and Disconnection with Light

The on‐going need for feature miniaturization and the growing complexity of structures for use in nanotechnology demand the precise and controlled formation of covalent bonds at the molecular level. Such control requires the use of external stimuli that offer outstanding spatial, temporal, as well as energetic resolution. Thus, photoaddressable switches are excellent candidates for creating a system that allows reversible photocontrol over covalent chemical connection and disconnection. Here we show that the formation of covalent bonds between two reagents and their scission in the resulting product can be controlled exclusively by illumination with differently colored light. A furyl‐substituted photoswitchable diarylethene was shown to undergo a reversible Diels–Alder reaction with maleimide to afford the corresponding Diels–Alder adduct. Our system is potentially applicable in any field already relying on the benefits of reversible Diels–Alder reactions.     

Selector‐Induced Dynamic Deracemization of a Selectand‐Modified Tropos BIPHEPO‐Ligand: Application in the Organocatalyzed Asymmetric Double‐Aldol‐Reaction

Stereolabile interconverting catalysts open up the possibility of directing enantioselectivity in asymmetric synthesis by formation of diastereomeric complexes with chiral auxiliaries and deracemization. However, the stoichiometrically used auxilliaries can significantly limit the potential applications of such systems. We synthesized a new BIPHEPO tropos ligand containing achiral selectands in the backbone, which forms transient diastereomeric associates with amylose‐tris‐3,5‐dimethylphenyl carbamate as a selector and thus deracemizes. The enantiomerically enriched BIPHEPO obtained was successfully used in the organocatalytic asymmetric double aldol addition of substituted methyl ketones to form benzaldehyde. This strategy combines an on‐column deracemization with the high stereoinduction of chiral biarylphosphineoxides and opens up new possibilities in the field of self‐amplified asymmetric syntheses.     

A Tetrameric Cage with D2h Symmetry through Alkyne Metathesis

Shape‐persistent covalent organic polyhedrons (COPs) with ethynylene linkers are usually prepared through kinetically controlled cross‐coupling reactions. The high‐yielding synthesis of ethynylene‐linked rigid tetrameric cages via one‐step alkyne metathesis from readily accessible triyne precursors is presented. The tetrameric cage contains two macrocyclic panels and exhibits D_2h symmetry. The assembly of such a COP is a thermodynamically controlled process, which involves the initial formation of macrocycles as key intermediates followed by the connection of two macrocycles with ethynylene linkages. With a large internal cavity, the cage exhibits a high binding selectivity toward C₇₀ (K=3.9×10³ L mol^?1) over C₆₀ (no noticeable binding).     

Diastereo‐ and Enantioselective anti‐Selective Hydrogenation of α‐Amino‐β‐keto Ester Hydrochlorides and Related Compounds Using Transition‐Metal–Chiral‐Bisphosphine Catalysts

This review describes our recent works on the diastereo‐ and enantioselective synthesis of anti‐β‐hydroxy‐α‐amino acid esters using transition‐metal–chiral‐bisphosphine catalysts. A variety of transition metals, namely ruthenium (Ru), rhodium (Rh),iridium (Ir), and nickel (Ni), in combination with chiral bisphosphines, worked well as catalysts for the direct anti‐selective asymmetric hydrogenation of α‐amino‐β‐keto ester hydrochlorides, yielding anti‐β‐hydroxy‐α‐amino acid esters via dynamic kinetic resolution (DKR) in excellent yields and diastereo‐ and enantioselectivities. The Ru‐catalyzed asymmetric hydrogenation of α‐amino‐β‐ketoesters via DKR is the first example of generating anti‐β‐hydroxy‐α‐amino acids. Complexes of iridium and axially chiral bisphosphines catalyze an efficient asymmetric hydrogenation of α‐amino‐β‐keto ester hydrochlorides via dynamic kinetic resolution. A homogeneous Ni–chiral‐bisphosphine complex also catalyzes an efficient asymmetric hydrogenation of α‐amino‐β‐keto ester hydrochlorides in an anti‐selective manner. As a related process, the asymmetric hydrogenation of the configurationally stable substituted α‐aminoketones using a Ni catalyst via DKR is also described.