High precision topographic data on Lop Nor basin's Lake "Great Ear" ? and the timing of its becoming a dry salt lake

High precision elevation measurements using DGPS were carried out along three representative tran- sects for the "Great Ear" area, a dry salt lake within the Lop Nor basin. Results indicate that the Lop Nor basin is only 5.2 m deep and its lowest point occurs at the center of the "Great Ear". In addition, the basin is asymmetric - steeper in the southwest (0.19‰) and gentler in the northeast (0.09‰). Points along the same "Great Ear" ring were found to have an identical elevation value, but different when from different ones (lower towards the center). The spacing of the "Great Ear" rings was found to be closely related with the surface steepness. The closer the "Great Ear" rings are spaced, the steeper the ground surface, and vice versa. These findings support the argument that the "Great Ear" rings are the former shoreline trails left behind by Lop Nor water during the last few episodes of recession towards its total dry up. A comprehensive analysis of the high precision elevation data, historical accounts, aerial and satellite photographs and imagery, and official topographic maps of the study area suggests that the "Great Ear" area in the Lop Nor basin was incorrectly mapped as being covered by a great body of water on the 1963 topographic maps. A re-interpretation of the 1958 aerial photographs and newer remote sensing imagery indicated that the "Great Ear" ring structure was already in place in 1958 and it continued to appear on the subsequent remote sensing data without any major changes. It is estimated that lake water in the "Great Ear" area of the Lop Nor basin disappeared between the late 1930s and early 1940s.     

旅华日本、韩国游客旅游特征及偏好研究

以2004年在北京、上海、广州、桂林、昆明和西安6个热点旅游城市进行的随机抽样调查数据为依据,运用旅游地理学基本原理、心理学分析和比较分析等研究方法,从人口统计、旅游活动及偏好等方面对旅华日本和韩国游客进行了定性和定量的分析,总结出游客基本特征:游客以观光为主要目的,团队多于散客,大部分游客都有1～3次的来华经历;停留时间多为4～7 d;主要目的地是北京、上海和西安;偏好民俗文化类活动和中国传统工艺品.同时通过对比揭示两国游客的共性和差异,并提出一些建议,希望对进一步拓展日韩客源市场提供帮助.     

基于多元时间序列融合的飞行动作识别方法

针对飞行动作数据随机性强与长度不一致的问题,提出通过减小动态时间规整(DTW)算法的搜索空间,并定义不同特征参数贡献度的概念,实现对飞行数据的多元时间序列融合,从而完成对战术机动动作的识别。通过引入预分类和细分类结合的方式,对动作数据进行预处理,然后根据改进的动态时间规整(WDTW)算法对待测数据进行识别。仿真实验表明,相比传统DTW算法,WDTW算法通过降低算法复杂度,识别计算时间变化明显;对核密度与精准度系数的分析表明识别准确率亦有所提高。实验结果验证了所提方法的准确性。     

A/D转换技术及其发展

为了适应A/D转换发展的要求,A/D转换技术也变得越来越复杂。就A/D转换这一领域所应用的主要转换技术以及各自的特点做一简要的介绍,并由此推断出A/D转换技术的发展趋势。     

Stability and Nonlinear Deformation of Cylindrical Grids

The general stability of single-layer cylindrical grids is studied in linear and nonlinear formulations. Dependence of the general buckling load on the geometry and stiffness parameters of a grid is established in an analytical form. Such grids are numerically analyzed for stability. It is established that the general buckling load is much less than the local buckling load. Typical general buckling modes are found. It is shown that such grids are weakly sensitive to imperfections     

几何相似体应力-应变分布相同时的载荷关系

为了保证几何相似模型与原件具有完全相同的应力-应变分布,必须对几何相似模型施加与实际构件成对应比例的各种载荷,因此需要寻求几何相似模型在应力-应变分布完全相同时各种外加载荷的比例关系。从相似理论入手,以2端固支的矩形梁下表面边线中点的应力解析表达式为基础进行推导,得出相应的理论载荷关系,并用算例在弹塑性状态下验证了所得关系的正确性。得到的结论是:对于2个几何相似构件,若几何相似系数为kl,则当外加集中载荷的载荷系数为kl、均布线载荷的载荷系数为kl、均布面载荷的载荷系数为1时,2构件的应力-应变分布完全相同。     

带有回报计划的动态客户关系管理模型及实验应用分析

在客户最大化效用及公司最大化CLV的动态环境下。对所提的带有回报计划的动态客户关系管理模型用于某超市的客户数据库中，发现模型的结果对这类客户是适用的。并给出了不同的客户状态空间对应的有效营销组合策略。结果表明：合适的回报计划可以促进客户的购买、提高公司的利润及缓解价格竞争。回报极限应该比客户的平均购买水平偏高，回报率应该与回报极限的改变方向一致。计划的时间范围应定在一年左右比较合适。对于累积购买水平较高的客户一般不邮寄商品信息。在回报计划的初期与末期不用打折。中期对那些购买次数很少的客户可以实行相应的降价策略。     

激光诱导间质肿瘤热疗的数值模拟和实验研究

本文在考虑生物组织物性动态变化的情况下建立了激光诱导间质肿瘤热疗(LITT)的物理数学模型,采用MonteCarlo方法数值模拟了LITT中激光能量在生物组织内的传输过程,基于Pennes生物传热方程和Arrhenius方程数值求解了组织内的温度分布和热损伤体积的变化,分析了热物性及血液灌注率的动态变化对LITT过程的影响,并与相应的离体实验结果进行了对比。数值模拟结果表明,组织的热物性及血液灌注率的动态变化对于热损伤体积的变化具有重要的影响。因此在激光诱导间质肿瘤热疗的数值模拟中应该考虑热物性及血液灌注率的动态变化以期为临床治疗方案的制定提供更为准确的依据。     

A parallel cell‐based DSMC method on unstructured adaptive meshes

A parallel DSMC method based on a cell‐based data structure is developed for the efficient simulation of rarefied gas flows on PC‐clusters. Parallel computation is made by decomposing the computational domain into several subdomains. Dynamic load balancing between processors is achieved based on the number of simulation particles and the number of cells allocated in each subdomain. Adjustment of cell size is also made through mesh adaptation for the improvement of solution accuracy and the efficient usage of meshes. Applications were made for a two‐dimensional supersonic leading‐edge flow, the axi‐symmetric Rothe's nozzle, and the open hollow cylinder flare flow for validation. It was found that the present method is an efficient tool for the simulation of rarefied gas flows on PC‐based parallel machines. Copyright © 2004 John Wiley & Sons, Ltd.