水电站钢蜗壳与外围混凝土结构的受力特性研究

应用三维有限元法，结合我国龙羊峡，岩滩，宝珠寺水电站的厂房蜗壳结构，研究了钢蜗壳与外围混凝土之间设置软垫层情况下的蜗壳与外围混凝土结构的位移及应力分布规律，给出了钢蜗壳及外围混凝土结构的几个主要受力特性。     

Use of dynamic trees in a network simplex algorithm for the maximum flow problem

Goldfarb and Hao (1990) have proposed a pivot rule for the primal network simplex algorithm that will solve a maximum flow problem on ann-vertex,m-arc network in at mostnm pivots and O(n ² m) time. In this paper we describe how to extend the dynamic tree data structure of Sleator and Tarjan (1983, 1985) to reduce the running time of this algorithm to O(nm logn). This bound is less than a logarithmic factor larger than those of the fastest known algorithms for the problem. Our extension of dynamic trees is interesting in its own right and may well have additional applications.Research partially supported by a Presidential Young Investigator Award from the National Science Foundation, Grant No. CCR-8858097, an IBM Faculty Development Award, and AT&T Bell Laboratories.Research partially supported by the Office of Naval Research, Contract No. N00014-87-K-0467.Research partially supported by the National Science Foundation, Grant No. DCR-8605961, and the Office of Naval Research, Contract No. N00014-87-K-0467.     

Convergence analysis of time-point relaxation iterates for linear systems of differential equations

We study convergence properties of time-point relaxation (TR) Runge-Kutta methods for linear systems of ordinary differential equations. TR methods are implemented by decoupling systems in Gauss-Jacobi, Gauss-Seidel and successive overrelaxation modes (continuous-time iterations) and then solving the resulting subsystems by means of continuous extensions of Runge-Kutta (CRK) methods (discretized iterations). By iterating to convergence, these methods tend to the same limit called diagonally split Runge-Kutta (DSRK) method. We prove that TR methods are equivalent to decouple in the same modes the linear algebraic system obtained by applying DSRK limit method. This issue allows us to study the convergence of TR methods by using standard principles of convergence of iterative methods for linear algebraic systems. For a particular problem regions of convergence are plotted.     

非晶态硒化镉薄膜瞬态光电特性

本文报道用真空热蒸发法淀积的非晶态硒化镉薄膜作光敏介质制备超快光电导探测器。用对撞脉冲锁模Nd:YAG激光器产生的超短光脉冲序列对探测器的响应时间进行检测,结果表明a-CdSe薄膜对皮秒(10^-12秒)级的超短光脉冲作用具有良好的瞬态响应光电特性,探讨a-CdSe薄膜快速弛豫过程的内在机理。     

革胡子鲇触须和口腔粘膜的味觉器官

应用组织学切片和电镜扫描的方法，对革胡子鲇上颌须和口腔味蕾的组织形态特征进行了比较研究．发现分属于两个亚感觉通路（迷走叶和面叶味觉系统）的两类味蕾，其感受器细胞组成和形态结构没有明显的不同，主要区别为味蕾是否通过味孔与外界接触，以及在上皮中的分布状况．革胡子鲇口腔内也有少量面神经叶支配的味蕾位于口腔横瓣上．由迷走神经叶支配的味蕾成簇集中腭部．感觉细胞的微绒毛突出于顶端，有味刺激物能直接到达味感觉细胞膜上．其形态结构表明，鱼类味觉是接触性或近距离化学感受器．     

Ionic nanocomposites based on XNBR-OMg filled with layered nanoclays

Ionic elastomers based on carboxylated nitrile rubber (XNBR) crosslinked with magnesium oxide (OMg) and filled with layered nanoclays have been prepared. Two types of nanofillers were employed: a commercial one (Cloisite 15 A) and the other prepared in our laboratory (BCA-ODA). The properties of raw and vulcanized compounds have been studied in order to elucidate the effect of layered nanoclays. X-ray diffraction analysis shows that during compounding and crosslinking the macromolecular chains of rubber were intercalated in a commercial nanofiller, whilst our nanoclay was exfoliated. However, this fact does not affect the properties of compounds homogeneously. Vulcanization parameters, Mooney viscosity and decay and rheological properties were affected depending on the filler type. Mechanical properties were not significantly varied, but glass transition temperature and ionic transition temperature were shifted in comparison with those of the unfilled compound.     

34Mb/s彩色数字电视系统中的PAL彩色信号的分量分离

本文基于PAL信号的频谱特点,分析了由2H延迟线组成的梳状滤波器分离亮度信号的原理,给出了实验电路框图,并简要叙述了误差带来的影响。     

铁谱磨粒数字特征分析系统

应用图像处理技术建立了铁谱磨粒数字特征分析系统，有效地解决了大量提取磨损状态信息与减少主观因素影响的矛盾。系统分为基本操作、图像预处理和特征参数３个模块。文中对系统的主要功能及算法作了介绍并给出了计算实例。     

混沌反控制在心脏病治疗中的应用

正常的心脏中出现的混沌、心率过速与心肌组织中出现螺旋波有关,研究了一种七维心脏-血液耦合动力系统模型.首先通过线性负反馈对系统的参数进行了辨析,基于混沌反控制方法,使非混沌的心脏系统混沌特性加强,计算了系统输出信号的Lyapunov指数,为反馈信号幅度提供依据.数值计算模拟表明该方法的可行性,希望可以为心脏病的治疗和修复提供帮助信息.     

重力输水管道优化设计方法研究

针对重力输水管道设计中存在的问题，文章以管道造价最小为目标，应用动态规划，提出了一种新的重力输水管道优化设计方法，对输水管的当量管径、流量分配、连接管设置与可靠性校核计算等问题作了探讨。该方法可用于沿线有节点流量流出的并联输水管道优化设计，能明显节省投资，有良好的实用性