混沌反控制在心脏病治疗中的应用

正常的心脏中出现的混沌、心率过速与心肌组织中出现螺旋波有关,研究了一种七维心脏-血液耦合动力系统模型.首先通过线性负反馈对系统的参数进行了辨析,基于混沌反控制方法,使非混沌的心脏系统混沌特性加强,计算了系统输出信号的Lyapunov指数,为反馈信号幅度提供依据.数值计算模拟表明该方法的可行性,希望可以为心脏病的治疗和修复提供帮助信息.     

重力输水管道优化设计方法研究

针对重力输水管道设计中存在的问题，文章以管道造价最小为目标，应用动态规划，提出了一种新的重力输水管道优化设计方法，对输水管的当量管径、流量分配、连接管设置与可靠性校核计算等问题作了探讨。该方法可用于沿线有节点流量流出的并联输水管道优化设计，能明显节省投资，有良好的实用性     

应用测力—落刀装置对积屑瘤、鳞刺的研究

本文研制了一种测力—落刀装置,对积屑瘤和鳞剌的某些问题进行了试验研究。结果表明:在积屑瘤存在的区域内,由于刀具实际前角的增加,以及切屑与积屑瘤的接触长度小于自然接触长度,从而导致了切削力的降低。积屑瘤不是整体稳定不变的,也不是高频地整体脱落后再重新生长。而是基体比较稳定,头部产生高频的分裂、成长,其分裂的部分留在工件表面成为鳞剌,同时,引起了切削力的较大波动。切削力动态分量越大,相应的鳞剌高度越高。     

Guaranteed-accuracy approximation of reachable sets for a linear dynamic system subject to impulse actions

A method is proposed for approximating the reachable set of a dynamic system with a state space dimension no higher than six-eight considered on a finite time interval. The system is governed by linear differential equations with piecewise constant coefficients and impulse actions specified at prescribed times. The method is based on guaranteed-accuracy polyhedral approximations of reachable sets at researcher-specified times. Every approximation is constructed using the preceding one. A procedure is described for choosing parameters of the method that ensure the required accuracy with close-to-minimal time costs.     

动态链接方式下基于VB的绿色软件构造

分析了程序在动态链接和静态链接两种模式下的优缺点，以及在动态链接方式下构造绿色软件的困难所在。本文以VB为例，给出了动态链接方式下如何去构造绿色软件的一种方法，由于大多数的可视化开发工具均提供了与VB类似的功能，因此可以用本文类似的方法来解决其它可视化开发软件开发出来的程序的类似问题。     

航线优化的随机动态规划模型

航空公司在给定的运力和机队配置条件下,如何适应航线需求的不断变化而合理地分配运力,使航空公司的经营效益最大化是我国航空经营管理的一个重大课题.根据航班效益分析,在一定的经营时间,航行班次的条件下,建立一个航线贡献最大化的含有随机变量的动态规划模型.求解方法是先用M ON TE C ARLO方法计算机仿真把模型转化为非线性的整数规划.再用动态规划中资源分配算法求出模型的最优解,编排最优各航线规划.     

Basic study of the gelation of dimethacrylate‐type crosslinking agents

An investigation was made of the gelation of dimethacrylate‐type crosslinking agents in view of an application for separation media. The study mainly centered on a crosslinking agent, glycerol dimethacrylate (GDMA), which is relatively hydrophilic because of a hydroxyl group in the middle of its structure. The gelation of GDMA was compared with that of other hydrophobic crosslinking agents such as ethylene glycol dimethacrylate and 1,6‐hexanediol dimethacrylate. The diluents used in the study were toluene, toluene with methanol, and cyclohexanol. The gelation was observed in real time with a charge coupled device camera and dynamic light scattering (DLS). Also, the separated dry gels were extensively characterized with scanning electron microscopy, BET (N₂ absorption and desorption isotherm), and Fourier transform infrared. DLS analysis showed a stronger molecular interaction of GDMA gelation in toluene, whereas this interaction was much weaker in an alcoholic solvent such as toluene with methanol or cyclohexanol. This indicated that GDMA gelation might proceed through hydrogen bonding as well as a crosslinking reaction of vinyl groups. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 949–958, 2006     

Synthesis and micellization of amphiphilic poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride) block copolymers

Amphiphilic biodegradable block copolymers [poly(sebacic anhydride)–poly(ethylene glycol)–poly(sebacic anhydride)] were synthesized by the melt polycondensation of poly(ethylene glycol) and sebacic anhydride prepolymers. The chemical structure, crystalline nature, and phase behavior of the resulting copolymers were characterized with ¹H NMR, Fourier transform infrared, gel permeation chromatography, and differential scanning calorimetry. Microphase separation of the copolymers occurred, and the crystallinity of the poly(sebacic anhydride) (PSA) blocks diminished when the sebacic anhydride unit content in the copolymer was only 21.6%. ¹H NMR spectra carried out in CDCl₃ and D₂O were used to demonstrate the existence of hydrophobic PSA domains as the core of the micelle. In aqueous media, the copolymers formed micelles after precipitation from water‐miscible solvents. The effects on the micelle sizes due to the micelle preparation conditions, such as the organic phase, dropping rate of the polymer organic solution into the aqueous phase, and copolymer concentrations in the organic phase, were studied. There was an increase in the micelle size as the molecular weight of the PSA block was increased. The diameters of the copolymer micelles were also found to increase as the concentration of the copolymer dissolved in the organic phase was increased, and the dependence of the micelle diameters on the concentration of the copolymer varied with the copolymer composition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1271–1278, 2006     

Converging Marriage in Honey-Bees Optimization and Application to Stochastic Dynamic Programming

In this paper, we first refine a recently proposed metaheuristic called “Marriage in Honey-Bees Optimization” (MBO) for solving combinatorial optimization problems with some modifications to formally show that MBO converges to the global optimum value. We then adapt MBO into an algorithm called “Honey-Bees Policy Iteration” (HBPI) for solving infinite horizon-discounted cost stochastic dynamic programming problems and show that HBPI also converges to the optimal value.     

Nd掺杂的Bi4Ti3O12变温X射线衍射分析

利用变温X射线衍射技术，在预烧过程中分析了Nd掺杂Bi4Ti3O12后生成Bi3.15Nd0.85Ti3O12（BNT）相的形成过程以及微结构的变化．实验观察到以30℃／min的升温速率，BNT相在700℃时开始形成，其衍射峰强度随温度的继续升高而增强，衍射峰半高宽随烧结时间延长而减小．X射线衍射分析结果表明，在900℃恒温条件下，烧结约2h，可形成单一的BNT相．