不同干燥过程对超细TiO2粉体性质的影响

考察了采用不同干燥工艺制备的TiO2粉体在粒子形貌、颗粒大小与分布、晶相组成以及比表面积和孔结构等织构和结构性质方面的差异。结果表明，利用常规的干燥方法，由水凝胶脱水所得的颗粒，颗粒间严重团聚，颗粒粒径大且分布不均匀，比表面积和孔体积最小；由醇凝胶直接脱水，则可以显著提高粉体的织构性能．而采用超临界流体干燥法则可以进一步提高粉体的性能，比表面积由水凝胶的4．88m2·g－1增大到113．8m2·g－1，提高了近30倍；孔体积由0．027cm3·g－1增大到0．41cm3·g-1．大约提高了15倍；而且其能够有效地防止粒子间的团聚，较好地保持了湿凝胶的网络结构，使颗粒尺寸降低且分布均匀，可重复性好．     

Methods to Analyse the Texture of Alginate Aerogel Microspheres

Nitrogen adsorption at 77 K has been applied to the study of the texture of alginate aerogel microspheres obtained by CO₂ supercritical drying of alcogels. The limited volume shrinkage suggests that the aerogels preserve the texture of the hydrogels. Alginate aerogels presents a N₂ adsorption at small pressure higher than reference non-porous silica, to be attributed to the polarity of the surface or to a small microporous volume. The aggregated nanobead strings of the guluronic-rich gels accounts for a significant mesoporosity. The N₂ adsorption results correspond to electron microscopy observations for features smaller than 50 nm.     

CuO/ZnO/Al2O3合成甲醇催化剂制备方法

ＣｕＯ／ＺｎＯ／Ａｌ２Ｏ３合成甲醇催化剂的制备方法吴晓晖刘金尧刘崇微朱起明（清华大学化学系一碳化工国家重点实验室，北京１０００８４）何菲（天津大学化工系一碳化工国家重点实验室，天津３０００７２）关键词氧化铜，氧化锌，氧化铝，超细粒子，草酸盐胶体...     

Ultrasound freeze-thawing style pretreatment to improve the efficiency of the vacuum freeze-drying of okra (Abelmoschus esculentus (L.) Moench) and the quality characteristics of the dried product

Vacuum freeze-drying is a new and high technology on agricultural product dehydrating dry, but it faces the high cost problem caused by high energy consumption. This study investigated the effect of ultrasound (US), freeze-thawing (including the freeze-air thawing (AT), freeze-water thawing (WT), freeze-ultrasound thawing (UST), and freeze-air ultrasound thawing (AT + US)) pretreatments on the vacuum freeze-drying efficiency and the quality of dried okra. The results indicated that the application of ultrasound and different freeze-thawing pretreatments reduced the drying time by 25.0%–62.50% and the total energy consumption was 24.28%–62.35% less. The AT pretreatment reduced the time by of okra slices by 62.50% and the total energy consumption was 62.35% less. The significant decrease in drying time was due to a change in the microstructure caused by pretreatment. Besides, the okra pretreated with the US retained most of the quality characteristics (flavor, color, hardness, and frangibility) among all methods, while, AT + US had the most changeable characteristics in quality, which is deprecated in our study. The okra pretreated with the US and AT, separately, had the best dry matter content loss (9.008%, 5.602%), lower chlorophyll degradation (5.05%, 5.44% less), and higher contents of total phenolics, total flavonoids, and pectin, with strong antioxidant capacity, compared to other methods. The pretreatments did not have a large effect on the functional groups and the structure of pectin, but slightly affected the viscosity. It can be concluded that AT and US pretreatment methods are better than others.     

非挥发性组分对真空冷冻干燥过程的影响

对纯水和ＮａＣｌ溶液在砂床中冷冻干燥的特性进行了实验研究,分析了冻干过程中砂床温度的分布特性,研究了在不同颗粒尺寸砂床中,溶液浓度对干燥时间的影响和干燥后非挥发性质砂床中的分布。     

High‐Temperature Spray‐Dried Polymer/Bacteria Microparticles for Electrospinning of Composite Nonwovens

Living Micrococcus luteus (M. luteus) and Escherichia coli (E. coli) are encapsulated in poly(vinyl alcohol), poly(vinylpyrrolidone), hydroxypropyl cellulose, and gelatin by high‐temperature spray drying. The challenge is the survival of the bacteria during the standard spray‐drying process at temperatures of 150 °C (M. luteus) and 120 °C (E. coli). Raman imaging and transmission electron microscopy indicate encapsulated bacteria in hollow composite microparticles. The versatility of the spray‐dried polymer bacteria microparticles is successfully proved by standard polymer solution–processing techniques such as electrospinning, even with harmful solvents, to water‐insoluble polyacrylonitrile, polystyrene, poly(methyl methacrylate), and poly(vinyl butyrate) nanofiber nonwovens, which opens numerous new opportunities for novel applications.     

常压干燥法制备气凝胶的研究进展

气凝胶是一类轻质、低密度的三维纳米多孔固态材料,因其独特的高孔隙率、高比表面积和低导热系数等特性,使其在吸附、催化、保温隔热和隔音等诸多领域具有广泛的用途,目前其相关研究在材料科学领域受到了广泛的关注。气凝胶的制备主要包括溶胶-凝胶过程和湿凝胶干燥两个步骤,湿凝胶的干燥是制备气凝胶过程中至关重要而又较为困难的一步。传统的气凝胶通过超临界干燥制备,工艺复杂、成本高,而且由于干燥过程在高温高压条件下进行,有一定的危险性并且不适宜大规模生产,因此如何通过常压干燥获得高比表面积、高孔隙率、低密度的性能优异的气凝胶是其研究的重要方向之一。本文简要介绍了湿凝胶的制备以及凝胶干燥理论,详细介绍了近年来常压干燥方法气凝胶制备的研究进展,并对其未来发展前景做出了展望。     

非超临界干燥法制备SiO2气凝胶

应用廉价的国产硅溶胶为原料，通过凝胶过程和干燥过程条件的选择，以非超临界干燥技术最终获得了块状SiO2气凝胶.该气凝胶外观状态与应用正硅酸乙酯为原料制得的完全一致，其微观结构也相当良好，其直径和孔分布均匀.溶液的配比和pH对凝胶过程和气凝胶样品的密度有比较明显的影响，同时pH值与SiO2的粒径之间也有一定的关系.依据制备条件的变化，所得SiO2气凝胶的密度约在200～400 kg•m－3，比表面在250～300 m2•g－1之间变化，平均孔径约为11～20 nm，而孔隙率在91％左右.     

纳米氧化高银颗粒制备及其杀菌性能

在制备纳米氧化高银分散液基础上,控制条件为真空干燥、干燥温度70℃、干燥时间3 h、浸泡保护剂DJ2004浓度8.0 g/L,通过控制洗涤和干燥过程,制得粒径为20～100 nm的含65%氧化高银的纳米颗粒.采用异养菌静态杀菌实验对纳米氧化高银与其他银系产品进行杀菌性能评价,研究表明所制得的纳米氧化高银颗粒具有更强的杀菌性能及抗氯离子干扰性能.     

白炭黑生产工艺研究与实践

本文介绍依照GB10517—89技术标准,在常温常压下,以电解质溶液为沉淀剂,批量生产白炭黑的工艺过程。并对生产中的条件控制,消耗定额及产品质量等因素加以探讨和比较。