PLA nano- and microparticles for drug delivery: an overview of the methods of preparation

The controlled release of medicaments remains the most convenient way of drug delivery. Therefore, a wide variety of reports can be found in the open literature dealing with drug delivery systems. In particular, the use of nano- and microparticles devices has received special attention during the past two decades. PLA and its copolymers with GA and/or PEG appear as the preferred substrates to fabricate these devices. The methods of fabrication of these particles will be reviewed in this article, describing in detail the experimental variables associated with each one with regard to the influence of them on the performance of the particles as drug carriers. An analysis of the relationship between the method of preparation and the kind of drug to encapsulate is also included. Furthermore, certain issues involved in the addition of other monomeric substrates than lactic acid to the particles formulation as well as novel devices, other than nano- and microparticles, will be discussed in the present work considering the published literature available.     

In situ micro-sized gel-forming injectable implant using biodegradable amphiphilic graft copolymer

A synthesized graft polymer is used as a biodegradable polymer for an in situ gel-forming injectable implant system. The amphiphilic character of the polymer in the graft structure lowered the viscosity of the polymer solution, which enabled easy injection. A micro-sized gel can be obtained with this system, which has not been found for previous in situ gel-forming systems with poly[(D,L-lactide)-co-glycolide] copolymer. In addition, a protein particle embedded gel exhibits good in vitro drug release performance as a result of the enhanced stability and shorter diffusion length.     

Studies of a cobalt(III) complex of the MMP inhibitor marimastat: a potential hypoxia-activated prodrug

We report a potential means of selectively delivering matrix metalloproteinase (MMP) inhibitors to target tumour sites by use of a bioreductively activated Co(III) carrier system. The carrier, comprising a Co(III) complex of the tripodal ligand tris(methylpyridyl)amine (tpa), was investigated with the antimetastatic MMP inhibitor marimastat (mmstH(2)). The X-ray crystal structure of [Co(mmst)(tpa)]ClO(4) x 4H(2)O was determined and two-dimensional NMR revealed the existence of two isomeric forms of the complex in solution. Electrochemical analysis showed that the reduction potential of the complex is suitable for it to be bioreductively activated at hypoxic tumour sites. In vitro assays confirmed the stability of the prodrug in solution prior to reduction and revealed very low cytotoxicity against A2780 cells. In vivo testing in mice showed a higher level of tumour-growth inhibition by the complex than by free marimastat. Both free marimastat and and its Co(III) complex increased metastasis in the model used, with the complex significantly more active.     

Water-soluble carbosilane dendrimers: synthesis biocompatibility and complexation with oligonucleotides; evaluation for medical applications

Novel amine- or ammonium-terminated carbosilane dendrimers of type nG-[Si{OCH2(C6H3)-3,5-(OCH2CH2NMe2)2}]x, nG-[Si{O(CH2)2N(Me)(CH2)2NMe2}]x and nG-[Si{(CH2)3NH2}]x or nG-[Si{OCH2(C6H3)-3,5-(OCH2CH2NMe3 +I-)2}]x, nG-[Si{O(CH2)2N(Me)(CH2)2NMe3 +I-}]x, and nG-[Si{(CH2)3NH3 +Cl-}]x have been synthesized and characterized up to the third generation by two strategies: 1) alcoholysis of Si--Cl bonds with amino alcohols and subsequent quaternization with MeI, and 2) hydrosilylation of allylamine with Si--H bonds of the dendritic systems and subsequent quaternization with HCl. Quaternized carbosilane dendrimers are soluble in water, although degradation is apparent due to hydrolysis of Si--O bonds. However, dendrimers containing Si--C bonds are water-stable. The biocompatibility of the second-generation dendrimers in primary cell cultures of peripheral blood mononuclear cells (PBMCs) and erythrocytes have been analyzed, and they show good toxicity profiles over extended periods. In addition, we describe a study on the interactions between the different carbosilane dendrimers and DNA oligodeoxynucleotides (ODNs) and plasmids along with a comparative analysis of their toxicity. They can form complexes with DNA ODNs and plasmids at biocompatible doses via electrostatic interaction. Also a preliminary transfection assay has been accomplished. These results demonstrate that the new ammonium-terminated carbosilane dendrimers are good base molecules to be considered for biomedical applications.     

Design, synthesis, and delivery properties of novel guanidine-containing molecular transporters built on dimeric inositol scaffolds

We have developed a novel class of synthetic molecular transporters that contain eight residues of guanidine with an inositol dimer as the scaffold. The dimers were prepared by connecting two units of myo- or scyllo-inositol via a carbonate or amide linkage, and the multiple units of the guanidine functionality were constructed on the inositol scaffold by means of peracylation with omega-aminocarboxylate derivatives of varying length. Bioassays based on confocal laser scanning microscopy and fluorescence-activated cell sorter analyses indicated that these transporters display a varying degree of membrane translocating ability, and the intracellular localization and mouse-tissue distribution studies strongly suggested that these transporters undergo substantially different mechanistic processes from those of peptide transporters reported to date. It was also shown that doxorubicin, an anticancer antibiotic, can be efficiently delivered into mouse brain by aid of this type of transporter.     

Thermosensitive copolymer networks modify gold nanoparticles for nanocomposite entrapment

The core-shell gold nanoparticles and copolymer of N-isopropylacrylamide (NIPAM) and N,N'-methylenebisacrylamide (MBAA) hybrids (Au@copolymer) were fabricated through surface-initiated atom-transfer radical polymerization (ATRP) on the surface of gold nanoparticles in 2-propanol/water mixed solvents. The surface of citrate-stabilized gold nanoparticles was first modified by a disulfide initiator for ATRP. The slight cross-linking polymerization between NIPAM and MBAA occurred on the gold surface and resulted in the formation of core-shell Au@copolymer nanostructures that were characterized by TEM, and FTIR and UV-visible spectroscopy. Such synthesized Au@copolymer hybrids possess clearly thermosensitive properties and exhibit "inspire" and "expire" water behavior in response to temperature changes in aqueous solution. Because of this property, we enable to trap and encapsulate smaller nanoparticles by using the free space of the copolymer-network scaffold anchored at the gold surface.     

Design of original bioactive formulations based on sugar-surfactant/non-steroidal anti-inflammatory catanionic self-assemblies: a new way of dermal drug delivery

A new kind of catanionic assembly was developed that associates a sugar-based surfactant with a non-steroidal anti-inflammatory drug (NSAID). Three different assemblies using indomethacin, ibuprofen and ketoprofen as NSAIDs were easily obtained in water by an acid-base reaction. These assemblies formed new amphiphilic entities because of electrostatic and hydrophobic effects in water and led to the spontaneous formation of vesicles. These catanionic vesicles were then tested as potential NSAID delivery systems for dermatological application. The anti-inflammatory activity was evaluated in vivo, and this study clearly showed an improved therapeutic effect for NSAIDs that were formulated as catanionic vesicles. These vesicles ensured a slower diffusion of the NSAID through the skin. This release probably increased the time of retention of the NSAID in the targeted strata of the skin. Thus, the present study suggests that this catanionic bioactive formulation could be a promising dermal delivery system for NSAIDs in the course of skin inflammation treatment.     

Hollow fiber-based liquid phase microextraction combined with high-performance liquid chromatography for extraction and determination of some antidepressant drugs in biological fluids

The applicability of hollow fiber-based liquid phase microextraction (HF-LPME) was evaluated for the extraction and preconcentration of three antidepressant drugs (amitriptyline, imipramine and sertraline) prior to their determination by HPLC-UV. The target drugs were extracted from 11.0 mL of aqueous solution with pH 12.0 (source phase) into an organic extracting solvent (n-dodecane) impregnated in the pores of a hollow fiber and finally back extracted into 24 μL of aqueous solution located inside the lumen of the hollow fiber and adjusted to pH 2.1 using 0.1 M of H₃PO₄ (receiving phase). The extraction was performed due to pH gradient between the inside and outside of the hollow fiber membrane. In order to obtain high extraction efficiency, the parameters affecting the HF-LPME including pH of the source and receiving phases, the type of organic phase, ionic strength and volume of the source phase, stirring rate and extraction time were studied and optimized. Under the optimized conditions, enrichment factors up to 300 were achieved and the relative standard deviation (R.S.D.%) of the method was in the range of 2-12%. The calibration curves were obtained in the range of 5-500 μg L⁻¹ with reasonable linearity (R² > 0.998) and the limits of detection (LODs) ranged between 0.5 and 0.7 μg L⁻¹ (based on S/N = 3). Finally, the applicability of the proposed method was evaluated by extraction and determination of the drugs in urine, plasma and tap water samples. The results indicated that hollow fiber microextraction method has excellent clean-up and high-preconcentration factor and can be served as a simple and sensitive method for monitoring of antidepressant drugs in the biological samples.     

Controlled Release from and Tissue Response to Physically Bonded Hydrogel Nanoparticle Assembly

Our recent work on synthesis and application of thermally gelling nanoparticle dispersions is briefly reviewed here. These nanoparticles consist of interpenetrating polymer networks (IPN) of poly-acrylic acid (PAAc) and poly(N-isopropylacrylamide) (PNIPAM). The aqueous IPN nanoparticle dispersions with polymer concentrations above 2.5 wt % underwent an inverse thermoreversible gelation at about 33 °C. Dextran markers of various molecular weights as model macromolecular pseudodrugs were mixed with the IPN nanoparticle dispersion at room temperature. At body temperature, the dispersion became a gel. The dextran release profiles were then measured using UV-visible spectroscopy. The biocompatibility of this nanoparticle assembly was assessed using an animal implantation model.     

Development of Antibacterial,Degradable and pH-Responsive Chitosan/Guar Gum/Polyvinyl Alcohol Blended Hydrogels for Wound Dressing

The present research is based on the fabrication preparation of CS/PVA/GG blended hydrogel with nontoxic tetra orthosilicate (TEOS) for sustained paracetamol release. Different TEOS percentages were used because of their nontoxic behavior to study newly designed hydrogels’ crosslinking and physicochemical properties. These hydrogels were characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and wetting to determine the functional, surface morphology, hydrophilic, or hydrophobic properties. The swelling analysis in different media, degradation in PBS, and drug release kinetics were conducted to observe their response against corresponding media. The FTIR analysis confirmed the components added and crosslinking between them, and surface morphology confirmed different surface and wetting behavior due to different crosslinking. In various solvents, including water, buffer, and electrolyte solutions, the swelling behaviour of hydrogel was investigated and observed that TEOS amount caused less hydrogel swelling. In acidic pH, hydrogels swell the most, while they swell the least at pH 7 or higher. These hydrogels are pH-sensitive and appropriate for controlled drug release. These hydrogels demonstrated that, as the ionic concentration was increased, swelling decreased due to decreased osmotic pressure in various electrolyte solutions. The antimicrobial analysis revealed that these hydrogels are highly antibacterial against Gram-positive (Staphylococcus aureus and Bacillus cereus) and Gram negative (Pseudomonas aeruginosa and Escherichia coli) bacterial strains. The drug release mechanism was 98% in phosphate buffer saline (PBS) media at pH 7.4 in 140 min. To analyze drug release behaviour, the drug release kinetics was assessed against different mathematical models (such as zero and first order, Higuchi, Baker–Lonsdale, Hixson, and Peppas). It was found that hydrogel (CPG2) follows the Peppas model with the highest value of regression (R² = 0.98509). Hence, from the results, these hydrogels could be a potential biomaterial for wound dressing in biomedical applications.