电流并联负反馈放大器实验的研究

用实验的方法，研究电流并联负反馈对放大器性能的改善，提出电流型、并联型负反馈放大器性能参数的测量方法。     

椭圆波导FEM放大器的非线性特性研究

 以椭圆波导、平板摇摆器为FEM放大器的模型，导出了自洽的注波互作用三维非线性方程组。在此基础上编制了相应的程序。利用该程序分析了FEM放大器的饱和功率、效率以及带宽等高频特性。考虑了摇摆器渐变、空间电荷波、电子初始速度零散对高频特性的影响。     

The spreading behaviour of perfluoropolyether droplets on solid surfaces

The spread of perfluoropolyether （PFPE） droplets on solid surfaces has been measured from the top-down view through a microscope system. Effects of substrates, molecular weight and end-group functionality on spreading of the PFPE droplets have been studied experimentally and the results were compared with those by molecular dynamics （MD） simulations. Silicon wafer and diamond-like carbon （DLC） substrates were used to study the effect of substrates on spreading. Two types of PFPE, Z-dol and Z-tetraol, with the same chain structure and various molecular weights （2000 and 4000 g/mol） were employed in experiments. Effect of molecular weight has been investigated through comparing the spreading of Z-dol 2000 and Z-dol 4000, and it is found that the increase of molecular weight will decrease the mobility of PFPE. Comparison between spreading of Z-dol and Z-tetraol of the same molecular weight proved that functional end group plays a significant role on the spreading of PFPE, which confirmed the MD simulation results.     

利用分形法表征光学元件中高频相位畸变

针对神光Ⅲ主机装置使用的光学元件,基于分形理论,分析中高频相位畸变的统计分布特征,指出其满足分数布朗随机场,并利用结构函数法对分形维数进行计算,统计结果显示,大口径钕玻璃片的分形维数在2.34~2.43之间。利用局部稳态的随机中点位移法,提出一种新的表征光学元件相位的方法,将分形维数作为参数,可衡量中高频相位畸变,对高功率激光光学元件的评价有参考意义。     

S波段低温低噪声放大器

中介绍了S波段低温低噪声放大器的研制.在15K左右的环境温度下,300MHz带宽内,实测放大器的等效噪声温度≤4.6K,增益≥35dB,增益平坦度≤1.0clB,输入、输出回波损耗≤-20dB.它已经成功运用于射电天文等领域.     

基于SOA和NOLM的光脉冲放大与压缩的设计模型

设计了一种基于半导体光放大器(SOA)和非线性光学环镜(NOLM)的光脉冲放大与压缩的模型。数值研究结果表明:在NOLM中,当调节合适的控制脉冲的输入和初始时延时,具有较低峰值功率、宽度为几十皮秒的高斯信号脉冲经此模型放大压缩后,可以得到脉冲峰值增益高、脉冲宽度窄以及基本无基座的高质量超短信号光脉冲。     

基于硅波导的喇曼光放大器

在硅波导上添加反向偏压的PIN结构,当波导产生受激喇曼散射时,可以将波导中双光子吸收(TPA)产生的光生自由载流子扫出波导,降低了波导的非线性损失,极大地提高了硅波导中泵浦光对信号光的喇曼增益。为了应用已经非常成熟的硅工艺,并且应用硅波导使器件小型化,根据法布里-帕罗(F-P)腔和行波放大器理论,在硅波导两端的解理面蒸镀增透膜,应用这种波导的喇曼效应设计了一种光放大器,即基于硅波导的喇曼光放大器。建立了计算放大器增益的方程,给出了不同波导长度和输入功率情况下的放大器增益,得出适当增加波导长度和泵浦光功率可以得到较高喇曼增益的结论。基于硅的光放大器有较高的饱和功率且没有泵浦源的限制,通过调整泵浦激光的波长可以放大不同波长的信号光。     

120 nm Bandwidth Erbium-doped Fiber Amplifier

A new dual band erbium-doped fiber amplifier configuration that provides 120 nm of optical bandwidth is simulated. This configuration employs a split-band architecture in which optical signals are splitted using a 1550/1610 nm port filter into two independent sub-bands which then pass in parallel through separate branches of the optical amplifier. Each branch may be optimized for the sub-band that traverses it. The independent sub-bands are combined and flattened before output, resulting in a 120 nm bandwidth gain-flattened optical amplifier.     

光纤放大器增益饱和对有源光纤环形腔滤波特性的影响

从理论和实验两个方面研究了有源光纤环形腔滤波器输入光功率对光纤放大器增益的影响及由此引起的对有源光纤环形腔滤波特性的影响。在考虑上述影响的情况下 ,对有源光纤环形腔滤波器参数的优化作了讨论     

Studies on Nd:YAG Single-pass Amplifiers for High-power Q-switched Laser System

The output of Nd∶YAG single-pass laser amplifiers is studied analytically and experimentally. Methods of analysis for single-pass Nd∶YAG laser amplifier are presented. A flashlamp-pumped Q-switched Nd∶YAG oscillator/amplifier laser system has been developed with the average output power of 121.5 W.