Enhancing toughness of poly (lactic acid)/Thermoplastic polyurethane blends via increasing interface compatibility by polyurethane elastomer prepolymer and its toughening mechanism

Due to the environmental pollution caused by the petroleum-based polymer, poly (lactic acid) (PLA), a biodegradable and biocompatible polymer that obtained from natural and renewable sources, has attracted widespread attention. However, the brittleness of PLA greatly limits its application. In this study, the super toughened PLA-based blends were obtained by compatibilizing the PLA/thermoplastic polyurethane (TPU) blends with the polyurethane elastomer prepolymer (PUEP) as an active compatibilizer. The mechanical properties, thermal properties and corresponding toughening mechanism of PLA/TPU/PUEP system were studied by tensile test, instrumented impact test, dynamic mechanical analysis (DMA), scanning electronic microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). All the results demonstrate that the isocyanate (−NCO) group in PUEP is successfully reacted with the –OH groups at both sides of the PLA and the obtained polyurethane (PU)~PLA copolymer (PU ~ cõ PLA) significantly improves the interfacial compatibility of PLA/TPU blends. The gradually refined dispersed phase size and fuzzy phase interface as displayed in SEM images suggest a good interfacial compatibilization in the PLA/TPU/PUEP blends, probably due to the isocyanate reaction between PLA and PUEP. And the interfacial reaction and compatibilization among the components led to the formation of super toughened PLA/TPU/PUEP blends. And the instrumented impact results indicate that most of the impact toughness is provided by the crack propagation rather than the crack initiation during the entire fracture process.     

Synthesis of two A-B-C type conjugated amphiphilic triblock fullerene derivatives and their application in organic solar cells

Two A-B-C type conjugated amphiphilic triblock fullerene derivatives C60-2 HMTPB and C60-2 EHTPB were obtained in multi steps synthesis with three different blocks,and the amphiphilic diblock molecular C60-4 TPB was also preferred as a reference.When as modifying layer on zinc oxide(ZnO),the three fullerene derivatives can all reduce the work function of ZnO via modulation of the interfacial dipoles and lead a better electrical coupling.As introducing treatment of toluene,the obvious self-assembly of fullerene derivatives were observed,which were supported by X-ray diffraction and contact angle of water measurement.Base on PTB7-Th:PC71 BM system,the inverted organic solar cells devices with structure of ITO/ZnO/fullerene derivatives/PTB7-Th:PC71BM/Mo03/Al got power conversion efficiencies of 8.62%,8.83%and 9.00%for C60-4 TPB,C60-2 HMTPB and C60-2 EHTPB,respectively,compared 8.13%of devices with bare ZnO.The result of conjugated amphiphilic triblock fullerene derivatives provides a straightforward approaching by simultaneously modulating the morphology and interfacial work function of ZnO,which can also lead high performance in optoelectronic devices.     

Direct diazotization of graphite nanoplatelets with melamine and their favorable application in epoxy resins

The ease of undesirable agglomeration and a low efficiency are two problems that restrict the application of graphite nanoplatelets (GNPs) in epoxy resins (EP). Herein, a new strategy with melamine (MEL) as the precursor to functionalize GNPs chemically, which form a bonding layer that is compatible with epoxy matrix, is reported. The MEL fragments with secondary amine groups were grafted uniformly on the GNPs surface by covalent junctions to exploit the diazonium chemistry. This behavior led to a better dispersion and a stronger interaction with the epoxy matrix and resulted in an enhanced glass transition temperature and bending strength, compared with the pure EP. When only 1 wt% functionalized GNPs (f‐GNPs) was used, the Tg of the modified EP raised of about 15°C compared with pure EP, and the bending strength increased by approximately 39%. The dielectric constant of the EP with f‐GNPs was impacted slightly, and the dielectric loss decreased. At 10⁵ Hz, the dielectric loss of the EP with 1 wt% f‐GNPs decreased by approximately 11% compared with pure EP. Therefore, diazotization modification of the GNPs is a useful approach to improve the compatibility in nanoparticle networks.     

Design of aluminum trihydroxide and P‐N core‐shell structures and their synergistic effects on halogen‐free flame‐retardant polyethylene composites

In order to improve the performance of inorganic/organic composites, aluminum trihydroxide (ATH) core composites with a styrene‐ethylene‐butadiene‐styrene block copolymer grafted with maleic anhydride (MAH‐g‐SEBS) shell phase, and P‐N flame retardant as a synergistic agent, were prepared through an interface design. The effects of polyethylene glycol (PEG) content on the interfacial interaction, flame retardancy, thermal properties, and mechanical properties of high‐density polyethylene (HDPE)/ATH composites were investigated by small angle X‐ray diffraction, rotational rheometer, limiting oxygen index, thermogravimetric analysis (TGA), and tensile testing. The ATH synergistic effects of P‐N flame‐retardant improved the combustion performance of HDPE/ATH/PEG(3%)/MAH‐g‐SEBS/P‐N (abbreviated as HDPE/MH3/M‐g‐S/P‐N) composite by forming more carbon layer, increased the elongation at break from 21% to 558% compared to HDPE/ATH, and increased the interface thickness from 0.447 to 0.891 nm. SEM results support the compatibility of ATH with HDPE increased and the interfacial effect was enhanced. TGA showed the maximum decomposition temperature of the two stages and the yield of the residue at high temperature increased first and then decreased with the increase of PEG content. Rheological behavior showed the storage modulus, complex viscosity, and the relaxation time initially increased and then decreased with the increase of PEG content indicating PEG, M‐g‐S, and ATH powder gradually formed a partial coating, then a full coating, and finally an over‐coated core‐shell structured model.     

具有历史特征的Biba模型严格完整性策略

针对Biba模型中的严格完整性策略在保证数据完整性的同时会降低系统兼容性的问题,在Biba严格完整性模型基础上提出了具有历史特征的Biba模型严格完整性策略,将主体完整性等级扩展为独立的读写区间,并根据主体读写历史调整主体可读写的区间,并给出形式化的描述.该模型既可以保护系统数据的完整性,又能提高系统的兼容性.同时,给出所构造规则的实施策略的实现算法,说明该实施策略和常规实施策略具有相同的时间复杂度.     

海藻酸/淀粉/羧甲基纤维素共混膜的结构与性能研究

利用溶液共混法制备了新型共混膜:海藻酸/淀粉/羧甲基纤维素共混膜,通过红外光谱、X-射线衍射、原子吸收光谱、扫描电镜、热重分析和差示量热扫描等对共混膜的结构进行了表征,并测定了不同配比共混膜的透光率、抗张强度、断裂伸长率、水蒸汽透过率和吸水率.结果表明:共混膜中海藻酸、淀粉和羧甲基纤维素之间具有较强的相互作用和良好的相容性.共混膜具有良好的力学性能,在生物材料领域有潜在利用价值.     

基于自顶向下技术的轴承设计研究

骨架模型是Pro／ENGINEER中自顶向下设计产品的重要工具。论述采用骨架模型进行产品设计的基本步骤,然后介绍骨架模型应用于轴承设计的详细步骤,为实现产品的多样化和系列化设计提供了设计技巧和依据。     

Compatibility and fungal degradation of poly[(R)-3-hydroxybutyrate]/aliphatic copolyester blend

Poly[(R)-3-hydroxybutyrate] (PHB) was blended with an aliphatic copolyester, which was synthesized by the esterification of adipic acid, ethylene glycol, and lactic acid. The blend showed a single T_g, which varied systematically but convexly upwards with the composition. The growth rate of PHB spherulites, the crystallization temperature, and the equilibrium melting temperature of the blend were decreased as the amount of the copolyester was increased. Therefore, the blend system was determined to be compatible. However, the degree of crystallinity, and the enthalpies of crystallization and fusion of PHB in the blend remained almost constant, regardless of the compositional change, although the crystallization rate was decreased upon blending. No chemical change such as transesterification was observed as a result of the blending, yet there was a slight change in the crystalline morphology of PHB. The rate of fungal degradation was lowered with an increase in the copolyester content of the blend. © 1996 John Wiley & Sons, Inc.     

Synthesis of polymers having a phospholipid polar group connected to a poly(oxyethylene) chain and their protein adsorption-resistance properties

New methacrylates having a phospholipid polar group which was connected to various lengths of poly(oxyethylene) chains to form a polymerizable group (MEOnPC) were synthesized. The MEOnPC could polymerize with n-butyl methacrylate (BMA) in ethanol using a conventional radical polymerization technique. The unit mole fraction of MEOnPC in the polymer corresponded to that in the feed monomer solution. The MEOnPC polymers were soluble in ethanol, insoluble in water, but swelled in water and became hydrated. On the surface of a poly(BMA) membrane coated with MEOnPC, the phosphorylcholine groups of the MEOnPC unit present were determined by x-ray photoelectron spectroscopy. As a fundamental evaluation for biomedical materials, adsorption of one of the plasma proteins, fibrinogen, on acrylic beads coated with the MEOnPC polymers was evaluated. The amount of fibrinogen adsorbed on the MEOnPC polymer was smaller than that on the original acrylic beads, poly(BMA) and poly(2-hydroxyethyl methacrylate). The increase in the MEOnPC unit mole fraction in the polymer showed more effective protein adsorption-resistant properties. © 1996 John Wiley & Sons, Inc.     

基于波长调制-直接吸收光谱方法的CO分子1567 nm处谱线参数高精度标定

直接吸收光谱(DAS)可直接测量分子吸收率函数,并通过拟合吸收率函数确定待测气体参数.波长调制-直接吸收光谱(WM-DAS)在DAS基础上,结合了波长调制光谱(WMS)中谐波分析思想,利用傅里叶变换复现吸收率函数,可有效提高吸收率函数的测量精度.本文利用WM-DAS方法结合长光程气体吸收池,在室温低压条件下,对CO分子1567 nm处R5-R11近红外弱吸收谱线吸收率函数进行了精确复现,其拟合残差标准差低至3×10^-5,随后根据测得的吸收率函数对谱线的碰撞展宽、Dicke收敛以及速度依赖的碰撞展宽系数等光谱参数进行了高精度标定,并将其与高灵敏度的连续波腔衰荡光谱(CW-CRDS)测量结果进行了比较,实验结果表明该方法与CW-CRDS测量结果具有高度一致性,更具有系统简单、测量速度快、对环境要求低等优点.