Experimental calculations of number,energy and dose albedos for various materials using 662 keV gamma rays

ABSTRACT

Number, energy and dose albedos are measured at a scattering angle of 180° for a broad beam of 662 keV gamma rays obtained from a radioactive source of ¹³⁷Cs (having strength in µCi; 1 Ci?=?3.7?×?10¹⁰ disintegrations per second). The gamma beam is incident on semi-infinite thick targets of variable atomic numbers. The scattering media is divided into three sets, which are pure elements, alloys and composite materials. Experiments are carried out using a 3^″?×?3^″ NaI(Tl) scintillation detector. To obtain precision in data, the response unfolding of a scintillation detector is used, which converts the observed pulse-height distribution to a true photon spectrum over the energy range of 2.5 to 640 keV. The detector response unfolding results in the true intensity of back-scattered gamma flux by shifting the events resulting from partial absorption of photons to the full energy peak of the spectrum. In the present study, albedo factors are studied as a function of target thickness and their atomic number. The experimentally calculated numbers of back-scattered gamma photon are in good agreement with theoretically generated numbers of multiple back-scattered counts by using a Monte Carlo simulation code. The experimental data on energy and intensity of 662 keV gamma photons are used to evaluate the number, energy and dose albedos for different materials under investigation.     

Using the OSL single-aliquot regenerative-dose protocol with quartz extracted from building materials in retrospective dosimetry

We report on the application of the single-aliquot regenerative-dose (SAR) protocol to the optically stimulated luminescence signal from quartz extracted from fired bricks and unfired mortar in retrospective dosimetry. The samples came from a radioactive materials storage facility, with ambient dose rates of about 0.1 mGy/h. A detailed dose-depth profile was analysed from one brick, and compared with dose records from area TL dosemeters. Small-aliquot dose-distributions were analysed from the mortar samples; one associated with the exposed brick, and one from a remote site exposed only to background radiation. We conclude that unfired materials have considerable potential in retrospective dosimetry.     

IDose^4迭代重建技术应用于低剂量CT肾动脉血管造影的临床分析

为探讨IDose 4迭代重建技术在低剂量CT肾动脉血管造影中的应用价值,选取205例拟行肾动脉CT血管造影患者,随机将其分为4组,A组(51例)采用管电压100 kV、管电流100 mA,碘海醇370 mg I/mL及IDose 4迭代重建技术,B组(51例)采用管电压100 kV、管电流150 mA,碘海醇270 mg I/mL及IDose 4迭代重建技术,C组(51例)采用管电压80 kV、管电流180 mA,碘海醇270 mg I/mL及IDose 4迭代重建技术,D组(52例)管电压120 kV、管电流120 mA,碘海醇370 mg I/mL及滤波反投影(FBP)重建技术。分析各组图像肾主动脉干CT值、噪声(SD)、信噪比(SNR)和噪声比(CNR),受检者接受CT有效剂量(ED)、容积CT剂量指数(CTDI vol)、剂量长度乘积(DLP)、碘摄入量以及重建图像评分差异和诊断效能。结果显示,A、B、C组重建图像评分优于D组,肾动脉主干CT值、SD、SNR、CNR均高于D组,B、C组肾动脉主干CT值、SD略低于A组。A、B、C组CTDI vol、DLP、ED均低于D组,B组CTDI vol、DLP、ED高于A组。A、B、C、D组诊断肾主动脉狭窄准确率分别为92.68%、86.49%、84.62%、82.86%。证实IDose 4迭代重建技术能降低受试者受辐射和造影剂剂量,提高成像质量,在低剂量CT肾动脉血管造影中具有较高可行性和实用性。     

应用Logistic方程确定杏枝条低温半致死温度的研究

以杏树１年生枝条为材料,对４０个杏品种进行了抗寒性研究。结果表明,电导法测定杏抗寒性结果稳定、可靠。以－２４～－４０℃处理的电解质渗出率,配以Ｌｏｇｉｓｔｉｃ方程、多数品种具有较好的拟合度,方程代表的“Ｓ”型曲线拐点可以看作是杏休眠枝的临界致死温度,对４０个样本用恢复生长法验证与ＬＴ５０结果基本一致。     

辐射剂量与防护实验教学改革与研究

辐射剂量与防护实验教学是核类学生学习期间不可或缺的环节;我们通过深化改革实验教学方法,发展理论与实际相结合的教学方式;以提高学生的创新思维积极性,引导学生自主设计、优化实验方案、进行实地测量和分析,培养学生自主思考、解决问题的能力等方面改革教学,加强了学生的动手能力,提高了学生的社会生存能力,增强了学生的学习兴趣,提高了教学效果。     

Ultra-fast chromatographic micro-assay for quantification of diphenidol in plasma: application in an oral multi-dose switchability trial

Pharmacokinetics of diphenidol (DPN) is limited due to the lack of analytical methodology. Here, a micro-assay for DPN quantification was developed, by coupling ultra-performance liquid chromatography with tandem mass spectrometry. The procedure involved plasma precipitation and injection of supernatant into UPLC with an Acquitytrade mark C18 column. Detection was in positive electrospray, following transitions of m/z 310.3 --> 292.3 and m/z 275.3 --> 230.2 for DPN and chlorphenamine (internal standard), respectively. The method was linear with a range of 4-400 ng/mL, and a 2 min run time. This method was applied in a switchability trial, where both formulations of DPN were bioequivalent.     

Indoor radon measurement in Izmir Province,Turkey

In 2013, an extensive study was performed in a total of 117 locations in Izmir province and indoor radon levels were measured using the alpha track etch integrated method with LR-115 detectors. As the maps are more practical to interpret the results of radiological survey, the distributions of indoor ²²²Rn activities in four most densely populated districts of Izmir were mapped in detail. It is seen that the estimated average radon concentration level (210 Bq m^?3) determined in Izmir province was almost three times higher than the mean value for Turkey (81 Bq m^?3). Exposed annual effective dose equivalents for Izmir province were estimated in the range of 0.7 to 12.3 mSv year^?1 with a mean of 5.3 mSv year^?1. In this study, it is pointed out that indoor radon concentration was affected by the age of the building and height above the ground.     

超深亚微米互补金属氧化物半导体器件的剂量率效应

对0.18 μm互补金属氧化物半导体(CMOS)工艺的N型金属氧化物半导体场效应晶体管(NMOSFET)及静态随机存储器(SRAM)开展了不同剂量率下的电离总剂量辐照试验研究. 结果表明: 在相同累积剂量, SRAM的低剂量率辐照损伤要略大于高剂量率辐照的损伤, 并且低剂量率辐照损伤要远大于高剂量率辐照加与低剂量率辐照时间相同的室温退火后的损伤. 虽然NMOSFET 低剂量率辐照损伤略小于高剂量率辐照损伤, 但室温退火后, 高剂量率辐照损伤同样要远小于低剂量率辐照损伤. 研究结果表明0.18 μm CMOS工艺器件的辐射损伤不是时间相关效应. 利用数值模拟的方法提出了解释CMOS器件剂量率效应的理论模型.     

Quantification of tenatoprazole in rat plasma by HPLC: validation and its application to pharmacokinetic studies

A simple, reliable HPLC method with UV detection (295 nm) in rat plasma was developed and validated for quantification of tenatoprazole, a novel proton pump inhibitor, which is in clinical trials. Following a single-step liquid-liquid extraction, the analyte and internal standard were separated using an isocratic mobile phase on a reverse phase C(18) column. The lower limit of quantitation was 20 ng/mL, with a relative standard deviation of less than 10%. A linear dynamic range of 20-6000 ng/mL was established. This HPLC method was validated with between-batch and within-batch precision of 2.9-6.3 and 1.4-5.8%, respectively. The between-batch and within-batch accuracy was 95.1-104.1 and 92.4-101.0%, respectively. This validated method is simple and repeatable enough to be used in pharmacokinetic studies.     

不同碱化剂合成聚合氯化铝铁的性能比较研究

用两种碱化剂合成了不同碱化度,不同铝铁比的聚合氯化铝铁（ＰＡＦＣＮａ、ＰＡＦＣＣａ）。研究了它们的ＰＨ弛豫、电导率变化、可见光谱等物理化学性质,进行了絮凝对比实验和稳定性观察,发现ＰＡＦＣａ、ＰＡＦＣＣａ的合成分别有着不同的反应历程和产物形态。它们形成最佳絮凝形态及最稳定共聚物的铝铁摩尔比分别为５：５和６：４,前者在常温下生成,后者需在加热条件下合成。有关操作参数对以含钙原料合成ＰＡＦＣ的工业生产