Validation of an optimization procedure to improve low frequency characteristics of rooms

A set of experiments was carried out to validate an optimization procedure based on finite element method (FEM). The idea of the procedure, fully presented in previous edition of this journal [Zhu X, Zhu Z, Cheng J. Using optimized surface modifications to improve low frequency response in a room. Appl Acoust 2004;65:841-60], is to produce an optimal geometry modification on the wall for improving low frequency sound uniformity in small rooms. Four experimental models were set up with a scale of 1:5. One was modified according to the optimized result and the others were treated with no optimization consideration. Measured frequency responses of four rooms were compared with numerical results calculated by FEM models. The transient responses in these rooms were also measured and analyzed. The agreements between calculation and measurement are satisfactory though the discrepancies due to the uncertainty of acoustic behavior of the room boundaries remain. The optimization procedure has been supported by the results that the optimized room produces the flattest frequency response and also the most smooth energy decay within the frequency range studied. The reductions of response fluctuation have reached 4.3 dB for prediction and 2.6 dB for measurement, respectively.     

建筑卷扬机卷筒端侧板强度的理论分析与试验研究

本文依据理论分析、光弹性试验、电测试验并经数学拟合,建立了卷扬机卷筒端侧板强度计算公式.     

结构可靠性设计中尺寸变差系数的确定方法

提出了在结构可靠性设计中,根据现有加工条件和设计要求确定几何尺寸变差系数的思想,并给出了当已知精度等级时,直接加工尺寸和组合尺寸变差系数的计算方法和程序。采用该方法使可靠性设计更切合实际。     

Modification to the Fringe Component of Diffraction Coefficient in TD-EEC Method

A modified formulation for fringe component of diffraction coefficient is implemented to TD-EEC method. An example of diffraction by perfectly conducting plate is used to illustrate our scheme. Comparing with the FDTD results we observe that the improved expression for fringe component is more accurate than that of Michaeli's formulation. This high frequency time domain technique is available for treating the bistatic scattering problems for millimeter waves.     

高频等离子体化学气相淀积法制备TiO2超细粒子

利用ＴｉＣｌ４＋Ｏ２体系，在高频等离子体化学气相淀积反应器中合成了纯度高、粒度细的ＴｉＯ２粒子。考察了工艺条件对ＴｉＯ２粒子物性的影响；探讨了ＴｉＯ２粒子晶型控制的方法，金红石型质量分数可通过工艺条件控制；探讨了ＴｉＯ２粒子晶型控制的方法。金红石型质量分数可通过工艺条件控制，减少ＴｉＯ２单体浓度可提高金红石型质量分数；也可通过在原料ＴｉＣｌ４中添加ＡｌＣｌ３等晶型转化剂，使可转化为单一金红石型Ｔｉ     

一种短波电台频率合成器的研制

该文介绍一种采用Ｍｏｔｏｒｏｌａ公司ＭＣ１４５１４６和ＭＣ１２０１７／１８蕊片构成的短波电台频率合成器的硬件电路实现方案。频率合成器的输出频率范围２～２９．９９９９ＭＨｚ，频率间隔１００Ｈｚ，换频时间小于０．０１ｓ。文中论述了这种多环数字式频率合成器工作原理，各环路之间对应的频率关系和电路参数的选择，给出了频率合成器的试验结果．     

M-M型纳米颗粒膜的巨磁电阻效应

探讨了M-M型纳米颗粒膜巨磁电阻效应的物理机制，指出了影响颗粒膜巨磁电阻效应的因素，推导出M-M型纳米颗粒膜巨磁电阻效应的计算公式。     

对提高施工中光缆接续质量的探讨

通过分析影响光缆接续质量的因素，从减少本征影响、克服技术因素、优化综合处置、减弱和避开环境影响4方面针对性地提出了实际施工中应采取的施工方法，以控制和减小不利影响，提高光缆工程的接续质量，为建设高质量传输线路提供有力保证。     

碗扣式多功能脚手架CO2气体保护自动焊机

采用CO2气体保护焊工艺研制了碗扣式多功能脚手架CO2气体保护自动焊接设备，在零部件尺寸不规范的条件下，利用电、气动机构实现多个工件的同时准确自动装卡及自动焊接，焊缝成形好，质量稳定，提高了生产效率，节约了能源及4／5的劳动力。     

品格狷洁诗清妙——试论孟浩然的个性品格及对其诗作的影响

本文通过梳理有关孟浩然的史料、诗作，力图勾勒出孟浩然的形象轮廓，点明其品格的个性特征，并进而分析其个性品格形成的原因及对诗作的影响。