Vanadium(V) Complexes of O,N,O-Donor Tridentate Ligands Containing the {VVO(OMe)}2+ Unit: Syntheses,Structures and Properties

Abstract

Syntheses, characterisation and properties of two complexes containing the oxovanadium(V) methoxide unit have been described. Deprotonated benzoylhydrazones of 2–hydroxy–5–methoxy‐benzaldehyde (H₂bhsOMe) and 2–hydroxy–5–chlorobenzaldehyde (H₂bhsCl) were used as coligands. Crystal structures of both the complexes were determined. In solid state one of them is a dinuclear species [VO(bhsOMe)(OMe)]₂ (1) whereas the other one is a mononuclear complex [VO(bhsCl)(OMe)(HOMe)](2). The dinegative ligands coordinate the metal ions via phenolate–O, imine–N and deprotonated amide–O atoms. In 1, the metal ions of two square pyramidal VO(bhsOMe)(OMe) units share the methoxide groups to form a dinuclear species. The oxygen of a methanol molecule completes the hexacoordination of the metal centre in 2. In each of the two distorted octahedral VO₅N moieties of 1 the bridging methoxide oxygen and in that of 2 the methanol oxygen is trans to the corresponding oxo group. Both the complexes are redox active. The VO³⁺ to VO²⁺ reduction potentials (vs Ag/AgCl) of 1 and 2 are observed at ?0.25 and ?0.04 V, respectively. The band positions in the electronic spectra and the redox potentials reflect the influence of the substituents present on the ligands.     

Potassium Ion-Selective Field-Effect Transistor (ISFET) Sensors: Studies on Gate Dimensions and Ion-Implantation Levels

Abstract

Silicon nitride membrane ISFET sensor chips have been produced with varying gate dimensions. A series of width/length (W/L) aspect ratios have been examined, combined with three levels of boron ion-implant. The level of ion-implantation affects the threshold voltage; this is important as a low threshold voltage allows the use of low noise operating conditions. Gate dimensions are also important factors for they determine the level of drain current for a given gate and drain voltages. A novel design feature, aimed at achieving wide gates, is the use of folded gates as well as having a straight structure. The evaluation of devices with gates covered with poly(vinyl chloride) (PVC)-valinomycin-dioctyl adipate was based on their response to potassium chloride standards when it was shown that there may be a maximum width of gate above which there is no improvement of response. Also, the effect of folding the gate structure is discussed and shown to be tenable, thus permitting greater miniaturisation.     

Studies of Anion Transport Through Supported Liquid Membrane

Abstract

Transport studies of anions were investigated through cellulose triacetate supported liquid membrane. The experimental variables explored were concentration of anions, sodium hydroxide, and stirring speed. The two-channel membrane system has been explored for the transport of carbonate ions from source to receiving phases. Carbonate ions are selectively transported through the cellulose triacetate supported liquid membrane in comparison with that of nitrate and sulfate. Sulfate and nitrate anions are strongly held in the cellulose triacetate membrane, and then stripped out later. Carbonate ions are loosely bound to the cellulose triacetate membrane and stripped out earlier.     

Stripping Voltammetric Determination of Uranium Traces in Sea Water Samples: Effect of Surfactants on the Measurements

The variables affecting determination of ultra trace levels of uranium (VI) in aqueous samples by differential pulse cathodic stripping voltammetry using chloranilic acid as the complexing agent have been examined in detail. Effect of organic surfactants on the voltammetric behavior has been studied. Electrochemical impedance measurements reveal the effect of adsorption of different surfactants on the adsorption pre-concentration step of uranium-chloranilic acid complex. Additionally, to better understand the analytical feature of the method, physicochemical aspects of the preconcentration process has been studied. Adsorption of uranium-chloranilic acid complex follows the Langmuir adsorption isotherm. Analysis results on sea water samples from India are reported.     

Morphology and electric conductivity of cross-linked polyethylene–carbon black blends prepared by gelation/ crystallization from solutions

 Ultra-high-molecular-weight polyethylene (UHMWPE) – carbon black (CB) blends were prepared by gelation/ crystallization from PE dilute solutions containing CB particles. The UHMWPE/CB composition chosen were 1/0.15, 1/0.25, 1/0.5, 1/0.75, 1/1, 1/3, 1/5, and 1/9, etc. The cross-linking of PE chains was performed by chemical reaction of dicumyl-peroxide at 160 ^°C. X-ray diffraction patterns indicate that the crystallinity of PE within the blends decreased drastically through the chemical reaction at high temperature. The sample preparation method by gelation/crystallization provided the UHMWPE–CB system with various CB contents up to 90% and the conductivities for the resultant specimens were in the range from 10^-9 to 1 Ω^-1 cm^-1 corresponding to the electric conductivity range of semiconductors. The blends assured thermal stability of electric conductivity by cross-linking of PE chains, although the mechanical property such as the storage and loss moduli were very sensitive to temperature. The conductivity of the blends with CB content ≥20% were almost independent of temperature up to 220 ^°C and the values in the heating and cooling processes were almost the same. On the other hand, for the UHMWPE–CB blends with 13% CB content corresponding to the critical one, temperature dependence of electric resistivity showed positive temperature coefficient (PTC) effect. The PTC intensities for non-cross-linked and cross-linked materials were lower than that of the corresponding low-molecular-weight-polyethylene (LMWPE)–CB blend but the maximum peak appeared at 160 ^°C which is higher than the peak temperature of LMWPE–CB blend. Received: 10 December 1997 Accepted: 9 April 1998     

Thermal Degradation of Polychloroprene Rubber Under Isothermal and Non-Isothermal Conditions

The results of a kinetic investigation of the non-isothermal degradation and the isothermal degradation of the residual deformation under constant deflection for polychloroprene rubber are presented. A relationship was derived between the degree of non-isothermal conversion and the value of the investigated mechanical property. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effects of Amplitude of the Radiofrequency Electromagnetic Radiation on Aqueous Suspensions and Solutions

The effects of radiofrequency (RF) (1–4) and magnetic fields (5–9) on the behavior of aqueous solutions and suspensions have been a popular subject in recent years. The mechanism of the magnetic “water memory” effect, though, is still largely unknown (5). In this work, we present evidence that the primary “receptor” of the electromagnetic radiation is a gas/liquid interface. Gas can be either already present in water or produced by the effects of electromagnetic fields. Perturbed gas/liquid interfaces require hours to equilibrate. Certain RF and magnetic signals also produce reactive oxygen and hydrogen species (superoxide, hydrogen peroxide, hydrogen, atomic hydrogen). The perturbed gas/liquid interface modifies the hydrogen bonding networks in water and also the hydration of ions and interfaces. Careful outgassing removes all of the effects of the electromagnetic fields, including the magnetic memory effect. The amplitude of the applied field influences the observed effects. Different amplitudes of RF radiation perturb the interfacial water in different ways and consequently affect the behavior of colloids and ions in specific manners. For instance, the bulk and template precipitation of calcium carbonate, zeta potentials of suspended colloids, rate of dissolution of colloidal silica, and attachment of colloidal silica to metal surfaces are modified in specific ways with the low amplitude or high amplitude RF treatments described in this paper. The solubility/diffusivity of gas species is also modified in a different manner, and it is probably at the core of the specificity of the RF amplitude effects.     

疏水色谱法的进展及其在生化研究中的应用

着重评述了疏水色谱法的理论研究及疏水固定相中无机填料、有机填料、非多孔填料以及大孔膜的新发展,并对疏水色谱法在生物大分子的分离、纯化和生化研究中的应用,包括在蛋白质复性、折叠和分子构象变化等方面的应用作了介绍,全文包括６２篇文献和一张表格。     

Extraction Equilibria between Benzene and Water of Uni- and Bivalent Metal Picrates with Lariat 16-Crown-5: Effect of the Side Arms on the Extraction Ability and Selectivity

The overall extraction constants (K_ex) of uni- andbivalent metal picrates with 15-(2,5-dioxahexyl)-15-methyl-16-crown-5(L16C5) were determined between benzene and water at 25°C. TheK_ex values were analyzed into the constituent equilibriumconstants, i.e., the extraction constant of picric acid, the distributionconstant of the crown ether, the stability constant of the metalion–crown ether complex in water, and the ion-pair extraction constantof the complex cation with the picrate anion. The K_ex valuedecreases in the orders Ag⁺ > Na⁺ >Tl⁺ > K⁺ > Li⁺ andPb²⁺ > Ba²⁺ > Sr²⁺ for theuni- and bivalent metals, respectively, which are the same as those observedfor 16C5. The extraction selectivity was found to be governed by theselectivity of the ion-pair extraction of the L16C5–metal picratecomplex rather than by that of the complex formation in water. Theextraction ability of L16C5 is smaller for all the metals than that of 16C5,which is mostly attributed to the higher lipophilicity of L16C5. Differencesin the extraction selectivity between L16C5 and 16C5 were observed for thebivalent metals but little for the univalent metals. The side-arm effect onthe extraction selectivity was interpreted on the basis of the negativecorrelation between the effect on the complex stability constant in waterand that on the ion-pair extraction constant.     

DrugFET的研究（Ⅳ）.硅钨酸—麻黄碱FET的研制与应用

将离子敏感场效应晶体管与药物敏感膜相结合研制成一种对盐酸麻黄碱有良好响应的药物敏感场效应晶体管传感器。