Structures and electrochemical characteristics of several kinds of alloys

The structures and the electrochemical characteristics of La_0.7−x Ce_xMg_0.3Ni_2.8Co_0.5 (x = 0.1–0.5) alloy, Ti_0.25−x Zr_xV_0.35Cr_0.1Ni_0.3 (x = 0.05–0.15) alloy and AB_3<x<5-type alloy, which are the representative examples of AB₃-type alloy, solid solution alloy and non-AB₅-type alloy, respectively, have been investigated, and the performances of MH-Ni battery in which AB_3<x<5 type alloy is used as the negative electrode material are examined at relatively low temperature.     

PbO~2纳米粉体的固相合成及其对MnO~2电极材料的改性作用

利用固相氧化反应制备了PbO~2纳米粉体样品，借助XRD，TEM以及循环伏安测试对其性质进行了表征。同时，对反应条件的选择进行了讨论。将所得样品用于改性MnO~2电极，恒流放电测试结果表明，样品掺杂量在1.25%～5.00%间对MnO~2有良好的改性效果，可使改性MnO~2的放电容量得到极大提高。循环伏安测试结果表明，铅的掺入改变了MnO~2的放电机理。在循环扫描过程中，掺杂物与MnO~2均不再以单纯氧化物的形式存在，而是形成了一系列Pb(X)(X=0,Ⅱ)Mn(Y)(Y=Ⅳ，Ⅲ，Ⅱ)复合物的共氧化与共还原，抑制了电化学惰性物质Mn~3O~4的生成和积累，从而有望改善MnO~2的可充性能。纳米PbO~2与常粒径PbO~2与常粒径PbO~2(标记为S)对MnO~2的改性机理类似。但前者对MnO~2的改性效果明显优于后者，当恒流放电至-1.0V时，其放电容量较S样改性MnO~2的放电容量平均高出约30%。     

Capillary gas chromatography of pesticide residues in foods: Application of a split/splitless inlet system

Residue mixtures of pesticides in foods which were difficult to separate by packed-column gas chromatography were determined by capillary gas chromatography and electron capture detection. Manual injections of sample and reference standard were made with a 10 μL syringe on a septum-enclosed, split/ splitless inlet system. Optimal peak height repeatability (± 3%( was achieved with three-μL injections which were made within time periods of four hours or less. The average linearity coefficient (slope( obtained for detector response as a function of solution concentration was 1.1.     

Plasma-Catalytic Decomposition of Phenols in Atmospheric Pressure Dielectric Barrier Discharge

This study investigated the processes for the destruction of phenol and its derivatives (resorcin and pyrocatechol) in aqueous solutions under the action of an oxygen dielectric barrier discharge (DBD) at atmospheric pressure in the presence or absence of catalysts in the plasma zone. It was shown that the DBD had a high decomposition efficiency for phenol and its derivatives (up to 99%). Phenol was the most stable and pyrocatechol was the least. In a plasma-catalytic hybrid process, the effective rate constants for phenol, resorcin and pyrocatechol decomposition were 11, 4 and 2.5 times higher, respectively, than those for the DBD treatment without catalysts. The process also resulted in a 1.4, 1.6 and 1.2 times higher rate of carboxylic acid formation for phenol, resorcin and pyrocatechol, respectively. The fractional conversion into the respective carboxylic acids reached 56% for phenol and 68% for resorcin and pyrocatechol.     

Production of N,H, and NH active species in N2-H2 dc flowing discharges

Densities of N, H, and NH active species have been detected by laser-induced fluorescence (LIF) in N₂-xH₂ dc flowing discharges. A peak value of N atom densities far x = 0.2–0.5% and a plateau value of H atom densities between x = 1% and 90% in post-discharge conditions (0.05 sec, p = 2 torr) has been found. Comparison between LIF measurements of N atoms and the trend of the N₂(B, v = II) population shows that the emission from this state can be used for monitoring N atoms. The NH radical has only been detected inside the discharge region.On leave from Instituto Tecnológico de Aeronáutica, CNPq, Brazil.     

Tetrachlorosilane Consumption in Radio Frequency Glow Discharge

Time-resolved mass spectrometry was used for analysis of the plasma reactions in radio frequency (RF) SiCl ₄ and SiCl ₄ –O ₂ discharges as functions of starting partial pressure and electrical power. Molecular concentrations of the reactants and products from SiCl ₄ alone and with O ₂ were obtained from the mass spectra and used for plotting the kinetic curves. The SiCl ₄ and O ₂ consumption rates were calculated from the kinetic curves and compared with results of theoretical simulation of the reaction. Direct electron impact decomposition was found to be the main pathway for pure SiCl ₄ conversion. On the contrary, the consumption of SiCl ₄ in the SiCl ₄ +O ₂ mixtures was largely chemical. The experimental macrokinetics are in agreement with a model in which oxidation is caused by the atomic oxygen.     

超临界流体萃取仪器的研制

本文报道了以国产原配件为基础，成功地研制了分析规模的超临界流体萃取仪器、并对仪器性能进行了全面考察，仪器性能稳定，重现性良好（ＲＳＤ＜３．１％），定量线性关系可靠，可满足定量萃取的要求。     

Characteristics and production of thermostable α-amylase

Thermostable α-amylases have application in a variety of industrial processes and enzymes from a substantial number of thermophilic bacteria and fungi have been screened and characterized to varying degrees. The characteristics of these enzymes are summarized in this review. The genetics of α-amylase production inBacillus subtilis is reviewed and classical and recombinant DNA approaches to increasing α-amylase production are discussed.     

Effects of Cathode and Anode on Deposition of Trimethylsilane in Glow Discharge

DC cathodic polymerization of trimethylsilane (TMS) was carried out in plasma reactors with and without using anode assembly. In DC cathodic polymerization, the TMS plasma polymers are mainly deposited on the cathode (substrate) surface. As a result, fast deposition of TMS plasma polymers was easily achieved in DC cathodic polymerization as compared with AF or RF plasma polymerization. DC cathodic polymerization without using anode assembly has its advantageous features that the size and number of substrates (as cathodes) are not restricted by the size and the location of anode assembly. It was found that the maximum deposition rate on the cathode surfaces was obtained without anode assembly. The DC cathodic polymerization of TMS was conducted also in a large volume reactor with multiple cathodes (substrates). The same deposition mechanisms for DC cathodic polymerization with a single cathode also apply to the multiple cathodes. Uniform deposition on each cathode could be obtained with appropriate spacing of multiple cathodes and by adjusting the operational parameters, which are based on the current density and the system pressure.     

壳聚糖／聚丙烯酸聚电解质复合物膜对水／有机液体系的渗透汽化性能

以壳聚糖和聚丙烯酸为原料制备了聚电解质复合物膜，并对其分离水／乙醇体系的渗透汽化特性和浓度，温度，化学组成等因素的影响进行了研究，发现后处理方法对复合物膜的分离性能影响很大。同时对其它水／有机液体系，该膜也具备优异的分离性能。