Integration of microbolometers with infrared microstrip antennas

We report on various integration schemes of infrared microbolometers with microstrip antennas. The first integration design consists of two gold (Au) rectangular microstrip patches coupled along the radiating edges by a narrow niobium (Nb) strip. Devices using silicon oxide are compared to devices using amorphous silicon as antenna substrate. An extension of the twin-patch detector design is the microstrip dipole antenna-coupled microbolometer. Two ways of connecting the device to the contact pads via narrow dc leads are presented and compared. The contribution of the dc leads to the detector response is eliminated by directly connecting the dipole to the contact pads. The thermal isolation of the microbolometer from the silicon wafer is improved by incorporating air into the antenna dielectric substrate. This leads to higher detector responsivity and shifts the resonance towards longer antennas. The implementation of a bridge microstrip dipole antenna structure is also discussed.     

Dipole approximation in three-vortex dynamics

We solve the problem of the relative motion of two nearby vortices (a dipole pair) and a third vortex for different current functions. __________ Translated from Teoreticheskaya i Matematicheskaya Fizika, Vol. 150, No. 3, pp. 409–416, March, 2007.     

Synthesis on the basis of electrogenerated carbenes

A series ofS _N2 reactions with halomethanes as substrates and the corresponding anions as nucleophiles were studied by the semiempirical MNDO and AM1 methods, taking into account solvent effects. Analysis of the kinetics, structures of reagents, intermediates and products, and charge distribution in them allows one to draw the conclusion that the retardation ofS _N2 reactions is stronger in solvents than in the gas phase, and the rates of reactions involving anions with a lower number of halogen atoms are higher.For Part 8 see Ref. 1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2148–2154, November, 1995.This work was partially financially supported by the International Science Foundation (Grant No. MHYOO).     

Protein-coated β-ferric hydrous oxide particles: An electrokinetic and electrooptic study

Using microelectrophoresis and electric light scattering techniques, we investigated the adsorption characteristics, surface coverage and surface electric parameters of superstructures from two isoforms of plastocyanin, PCa and PCb, in an oxidized state adsorbed on β-ferric hydrous oxide particles. The surface electric charge and electric dipole moments of the composite particles and the thickness of the protein adsorption layer are determined in a wide pH range, at different ionic strengths and concentration ratios of PC to β-FeOOH. The adsorption of the two proteins was found to shift the particles’ isoelectric point and to alter the total electric charge and the electric dipole moments of the oxide particles to different extent. A “reversal” in the direction of the permanent dipole moment is observed at lower pH for PCb- than for PCa-coated oxide particles. Strict correlation is found between the changes in the electrokinetic charge of the composite particles and the variation in their “permanent” dipole moments. Data suggest that the adsorption of the proteins is driven by electrostatic and/or hydrophobic interactions with the oxide surfaces dependent on pH. The adsorption behaviour is consistent with the involvement of the “eastern” and “northern” patches of the plastocyanin molecules in their adsorption on the oxide surfaces that are differently charged depending on pH.     

Electrostatic calculation of the substituent effect: an efficient test on isolated molecules

The energy of a disubstituted molecule has often been approximated by simple electrostatic formulas that represent the substituents as poles or dipoles. Herein, we test this approach on a new model system that is more direct and more efficient than testing on acid-base properties. The energies of 27 1,4-derivatives of bicyclo[2.2.2]octane were calculated within the framework of the density functional theory at the B3LYP/6-311+G(d,p) level; interaction of the two substituents was evaluated in terms of isodesmic homodesmotic reactions. This interaction energy, checked previously on some experimental gas-phase acidities, was considered to be accurate and served as reference to test the electrostatic approximation. This approximation works well in the qualitative sense as far as the sign and the order of magnitude are concerned: beginning with the strongest interaction between two poles, a weaker interaction between pole and dipole, and the weakest between two dipoles. However, all the electrostatic calculations yield energies that are too small, particularly for weak interaction, and this fundamental defect is not remedied by some possible improvements. In particular, variation of the effective permittivity would require a physically impossible value less than unity. The explanation must lie in a more complex distribution of electron density than anticipated in the electrostatic model. It also follows that possible conclusions about the transmission of substituent effects "through space" have little validity.     

Importance of the Debye interaction in organic solutions: Henry's law constants for polar liquids in nonpolar solvents and vice versa

Henry's law constants have been determined for -butyrolactone (BL), ethyl acetate (EA), and 2-methyl-3-pentanol (MEP) in mixtures of iso-octane (ISO) and toluene (TOL), for BL, EA, TOL, and ISO in cinnamaldehyde (CIN) and for TOL and ISO in each other and in BL. From these data and published vapor pressures, the activity coefficients at infinite dilution and the standard molar Gibbs free energy of transfer, G ₂ ⁰ of the solutes from dilute solution in ISO to dilute solution in each solvent medium have been calculated. The different behavior patterns of BL and EA are attributed to differences in their abilities to exist in different conformations possessing different dipole moments. For polar solutes, G ₂ ⁰ decreases with increasing polarizability of the solvent and with increasing dipole moment of the solute, suggesting increased contributions from dipole-induced dipole (Debye) interactions. The sigmoidal plot of G ₂ ⁰ against the change in pair potential energy calculated from the classical expressions suggests that G ₂ ⁰ seriously underestimates the strength of the Debye interactions in comparison with the London interactions.     

Ion–Dipole Interactions in Concentrated Organic Electrolytes

An algorithm is proposed for calculating the energy of ion–dipole interactions in concentrated organic electrolytes. The ion–dipole interactions increase with increasing salt concentration and must be taken into account when the activation energy for the conductivity is calculated. In this case, the contribution of ion–dipole interactions to the activation energy for this transport process is of the same order of magnitude as the contribution of ion–ion interactions. The ion–dipole interaction energy was calculated for a cell of eight ions, alternatingly anions and cations, placed on the vertices of an expanded cubic lattice whose parameter is related to the mean interionic distance (pseudolattice theory). The solvent dipoles were introduced randomly into the cell by assuming a randomness compacity of 0.58. The energy of the dipole assembly in the cell was minimized by using a Newton–Raphson numerical method. The dielectric field gradient around ions was taken into account by a distance parameter and a dielectric constant of ε=3 at the surfaces of the ions. A fair agreement between experimental and calculated activation energy has been found for systems composed of γ‐butyrolactone (BL) as solvent and lithium perchlorate (LiClO₄), lithium tetrafluoroborate (LiBF₄), lithium hexafluorophosphate (LiPF₆), lithium hexafluoroarsenate (LiAsF₆), and lithium bis(trifluoromethylsulfonyl)imide (LiTFSI) as salts.     

Dipole moments and structure of poly(epoxypropylcarbazole)

The mean-square molecular dipole moments 〈μ²〉 of carbazole, N-ethylcarbazole and of the sequence of poly(epoxypropylcarbazole) (PEPCa) oligomers of various molecular weights have been evaluated in solutions of these organic compounds in dioxan. For PEPCa the values of 〈μ²〉 have also been determined in the solid state. On the basis of the experimental results and of molecular mechanics calculations it has been shown that the orientation of the lateral group of PEPCa favors noninteracting racemic dyads. The temperature-dependence of the effective dipole moment of solid PEPCa follows the Onsager theory above 295 K.     

Enthalpies of mixing of <Emphasis Type="Italic">o</Emphasis>- and <Emphasis Type="Italic">m</Emphasis>-isomers at 298.15 K

Excess enthalpies (H ^E) of 17 binary mixtures of o- and m-isomers of dichlorobenzene, difluorobenzene, methoxymethylbenzene, dimethylbenzene, dimethoxybenzene, aminofluorobenzene, fluoronitrobenzene, diethylbenzene, chlorofluorobenzene, fluoroiodobenzene, bromofluorobenzene, chloromethylbenzene, fluoromethylbenzene, bromomethylbenzene, iodomethylbenzene, fluoromethoxybenzene, dibromobenzene at 298.15 K were measured. All excess enthalpies measured were very small, and those of o-+m-isomers of aminofluorobenzene, dibromobenzene and iodomethylbenzene were negative but 14 other binary mixtures of isomers were positive over the whole range of mole fractions. H ^E of o-+m-isomers of dimethoxybenzene showed the largest enthalpic instability and those of aminofluorobenzene showed the largest enthalpic stability. There was a correlation between dipole–dipole interaction, dipole–induced dipole interaction or entropies of vaporization and excess partial molar enthalpies at infinite dilution.     

Mechanism for large first hyperpolarizabilities of phosphonic acid stilbene derivatives

This paper presents calculations of dipole moments (mu), static polarizabilities (alpha), and first hyperpolarizabilities (beta) of phosphonic acid stilbene derivatives calculated in the framework of density functional theory. These calculations were performed using a finite field approach implemented in the density functional program ALLCHEM and were of an all-electron type using local exchange-correlation functional and specially designed basis sets. The molecular structures have been fully optimized using the semiempirical program MSINDO. Some of the investigated stilbenes have been synthesized very recently while others are described for the first time. Donor and acceptor groups of these analogues have been modified and the influence of these changes on the first hyperpolarizabilities has been investigated. This work demonstrates that the nonlinear optical response beta of these compounds increases dramatically when the acceptor moiety is displaced by analogues containing alkali metal groups. A general mechanism for the design of novel nonlinear optical materials with large first hyperpolarizabilities is described.