距离数字显示在脉冲超声多普勒血流检测中的应用

1 工作原理及电路组成图给出电路原理框图.以工作发射频率为时钟脉冲,调制脉冲作为闸门开启时间,将调制脉冲予以延迟作为接收信号的选通脉冲来关闭闸门,这个时间就是声脉冲从换能器发射到采样点,再回到接收换能器所经过的时间,用这个时间来控制时钟脉冲予以汁数、寄存、译码,以数字形     

数码相机引入科技照像实验

介绍了数码相机的系统结构和工作原理，通过与传统相机的对比分析，在科技照相实验中应该使用数码相机。     

一种改进的数字散斑相关方法用于检测人的口型变化

提出了一种基于数字散斑相关测量技术的口型变化检测技术,该技术以白光数字散斑相关测量方法为基础,根据实际应用的需要,引入重心算法并进行了改进,可以实时地检测人说话时的口型变化。通过实验表明,提出的方法是一种实用的、快速、高精度的口型变化测试方法,可为今后的唇语识别技术奠定基础。     

数字图书馆的几点思考

数字图书馆是21世纪科技发展的重要特点和趋势。本阐述了什么是数字图书馆，对今天数字图书馆领域中的几个热点问题，前沿理论问题，作了一次严肃、认真的回顾与反思。     

数码相机原理与系统设计研究

介绍了数码相机的工作原理 ,分析了数码相机的系统结构 ,提出了设计数码相机的处理流程。典型的数码相机系统有镜头、闪光灯、光学取景器、LCD显示屏、图像数据存储扩展设备接口、图像数据传输接口、供电系统以及核心处理器等八个主要模块。数码相机的数据流向从图像传感器开始 ,止于图像数据的存储和传输。数据流的处理主要包括模数转换、光学黑电平钳位、针对镜头的边缘畸变的运算修正、坏像素处理、白平衡处理、伽马校正、色彩合成处理、边缘检测 (锐度检测 )和伪彩色检测 (伪彩色抑制 )、JPEG压缩和图像存储器等模块     

铝电解过程控制信号的滤波与噪声解析模型的研究

将快速傅里叶变换技术和数字滤波器设计技术应用于铝电解过程控制信号的滤波与噪声解析模型中,在160kA中间点式下料预焙槽上的试验结果表明了模型的有效性。     

Quantitative evaluation of two-dimensional dynamic deformations using digital holography

An optical system for the parallel evaluation of in- and out-of-plane dynamical deformations will be described. A double pulse laser with pulse separation in the microsecond range is used for the investigations. Two separate interferograms of an object under test, in its undeformed and deformed state, are recorded in a few microseconds. The object is illuminated from two different directions and imaged onto a CCD sensor. This produces two sensitivity vectors. The reference beams have different directions in order to produce two directional spatial carriers. The Fourier method is used for quantitative evaluation, and the measurements along different sensitivity vectors are separated in the Fourier domain. The phases of the two interferograms are obtained from the complex amplitudes and the two dimensional deformation is calculated from the phases. Experimental results are presented.     

基于广义混沌同步的数字图像隐藏方案

基于广义混沌同步理论，提出了一种适于网络图像传输的隐藏数字图像的安全通讯方案．构造了一个六维广义混沌同步系统作为新方案的加密器，理论分析和计算机模拟说明本方案具有较高的保真度和较强的抗破译能力．     

A new microtensile tester for the study of MEMS materials with the aid of atomic force microscopy

An apparatus has been designed and implemented to measure the elastic tensile properties (Young's modulus and tensile strength) of surface micromachined polysilicon specimens. The tensile specimens are “dog-bone” shaped ending in a large “paddle” for convenient electrostatic or, in the improved apparatus, ultraviolet (UV) light curable adhesive gripping deposited with electrostatically controlled manipulation. The typical test section of the specimens is 400 μm long with 2 μm×50 μm cross section. The new device supports a nanomechanics method developed in our laboratory to acquire surface topologies of deforming specimens by means of Atomic Force Microscopy (AFM) to determine (fields of) strains via Digital Image Correlation (DIC). With this tool, high strength or non-linearly behaving materials can be tested under different environmental conditions by measuring the strains directly on the surface of the film with nanometer resolution.     

一种基于距离和灰度的特征提取及其十字链表法的编程实现

本文从数字图像的灰度及其边缘的距离特征 ,对数字图像的特征提取进行了分析和探讨 ,并绘出了基于十字链表这种数据结构的编程实现方案