确定线性偏微分方程组可积系统的对合特征集方法

基于Ritt-Wu特征集方法和Riquier-Janet理论,给出一种将线性微分方程组化成简单标准形式的有效算法．该算法通过消去冗余和添加可积条件获得线性微分方程组的完全可积系统(有形式幂级数解)或不相容判定．该算法不仅适用于常系数的线性偏微分方程组,而且对于变系数(以函数为系数)仍然有效．作者还给出了完全可积系统判定定理及其严格证明．     

加权微分建模的初步研究

加权建模是必要的,微分建模是重要的,把二者结合起来,进行加权微分建模既必要也重要.给出了常用模型的微分建模结果,讨论了加权建模中的计算和权重选择问题,探讨了加权微分建模的思路和方法,并结合典型数据验证了该方法的有效性和稳定性.象加权建模一样,加权微分建模的精度、实用价值等,是和权重确定得合理与否紧密相联;应先进行模拟,以与近期实际值或典型样本相差最小的参数所对应的模型为准.     

BOUNDEDNESS AND CONVERGENCE FOR THE NON-LINARD TYPE DIFFERENTIAL EQUATION

In this article, the author studies the boundedness and convergence for the non-Lienard type differential equation (x|·)=a(y)-f(x) (y|·)=b(y)β(x)-g(x) e(t) where a(y),b(y),f(x),g(x),β(x) are real continuous functions in y∈R or x∈R,β(x)≥0 for all x and e(t) is a real continuous function on R = {t: t≥0} such that the equation has a unique solution for the initial value problem. The necessary and sufficient conditions are obtained and some of the results in the literatures are improved and extended.     

镍-酸性铬兰K络合物吸附波

用微分脉冲溶出伏安法研究了镍(11)与酸性铬兰K(ACBK)所生成的络合物在悬汞电极上的电化学特性及电化学反应机理，发现电极反应为镍与酸性铬兰K所生成的络合物吸附在电极表面后发生的不可逆还原。在HCl-硼砂介质中(pH8．67)，络合物在-316mV处有一吸附还原峰，其峰电流与镍浓度在0．001～0．010μ/mL范围内呈现良好的线性关系，其最低检出浓度为0．0005μg／mL。     

线性常微分方程的保线性变换及其应用

研究了线性常微分方程的保线性变换，得到任意两个二阶线性常微分方程等价的条件，并用于求解一类二阶线性变系数齐次常微分方程．对数学物理方法教学中怎样通过适当的变换把给定的二阶线性变系数齐次常微分方程化为可解的方程给出了合理解释。     

Viscosity solutions of fully nonlinear parabolic systems

In this paper, we discuss the viscosity solutions of the weakly coupled systems of fully nonlinear second-order degenerate parabolic equations and their Cauchy-Dirichlet problem. We prove the existence, uniqueness and continuity of viscosity solution by combining Perron's method with the technique of coupled solutions. The results here generalize those in Proc. London Math. Soc. 63 (1991) 212-240 and Comm. Partial Differential Equations 16 (1991) 1095-1128.     

Eigenvalue and stability of singular differential delay systems

The eigenvalue and the stability of singular differential systems with delay are considered. Firstly we investigate some properties of the eigenvalue, then give the exact exponential estimation for the fundamental solution, and finally discuss the necessary and sufficient condition of uniform asymptotic stability.     

Annealing behavior of gel‐spun polyethylene fibers at temperatures lower than needed for significant shrinkage

The annealing at 373 K of ultrastrong, gel‐spun polyethylene (PE) has been studied. At this temperature, the fibers show no significant shrinkage. Still, a significant decrease in the mechanical properties is observed. The fibers have been analyzed with differential scanning calorimetry (DSC), temperature‐modulated differential scanning calorimetry (TMDSC), atomic force microscopy (AFM), and small‐angle X‐ray scattering (SAXS). During the annealing, the glass transition of the intermediate phase is exceeded, as shown by DSC. When split for structure analysis by AFM, the annealed fibers undergo plastic deformation around the base fibrils instead of brittle fracture. The quasi‐isothermal TMDSC experiments are compared to the minor structural changes seen with SAXS and AFM. The loss of performance of the PE fibers at 373 K is suggested to be caused by the oriented intermediate phase, and not by major changes in the structure or morphology. The overall metastable, semicrystalline structure is shown by TMDSC to posses local regions that can melt reversibly. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 403–417, 2003     

Periodic solutions of nonlinear impulsive differential inclusions with constraints

In this paper we obtain the existence of periodic solutions for nonlinear ``invariance' problems monitored by impulsive differential inclusions subject to impulse effects.

     

Sinc-Galerkin method for solving linear sixth-order boundary-value problems

There are few techniques available to numerically solve sixth-order boundary-value problems with two-point boundary conditions. In this paper we show that the Sinc-Galerkin method is a very effective tool in numerically solving such problems. The method is then tested on examples with homogeneous and nonhomogeneous boundary conditions and a comparison with the modified decomposition method is made. It is shown that the Sinc-Galerkin method yields better results.