活塞环表面碳化铌镀覆新工艺试验研究

用化学液相沉积方法，在高强度灰铸铁活塞环表面实现了Ｎｂｃ覆层，盘销磨擦磨损试验表明，无论在无润滑的情况时，Ｎｂｃ镀层表面要比镀Ｃｒ表面或铸铁原始表面具有更高的耐磨性，可以延长活塞环使用寿命，而Ｎｂｃ镀层与铸铁之间低的磨擦系数可使Ｓ１９５柴油机磨擦损失降低０．３５ｋＷ，降低比油耗９－５ｇ／（ｋＷ．ｈ）。     

纺织锭杆超精机PLC控制系统的设计研究

简要介绍了纺织锭杆超精机的设计思想，给出了自动控制系统的软硬件结构的设计方法，对纺织企业具有一定的参考价值．     

柴油机排气呈白色故障排除及分析

以红岩6-250ZCD柴油机故障为例,发现并分析了柴油机排气呈白色的特殊原因,有利于今后故障的快速确诊.     

转子流量计用于柴油消耗量测定的试验研究

本文对影响柴油用转子流量计测量精度的主要因素进行了试验研究。研究结果表明,柴没的粘度、密度以及测试温度不同,对测量精度将造成不可忽视的影响。根据流体力学的基本原理,利用试验优化方法提出的薄壁量孔校正方法,能够对柴油用转子流量计各标定值进行快速有效的校正。该方法具有较好的油品和温度适应性,其校正精度达2％。     

新型聚丙烯酸酯类柴油降凝剂分子模型的建立及验证

在前期工作得出的正构烷烃含量与浊点、冷滤点、凝点的定量关系模型基础上，选择柴油降凝剂的基团对柴油降凝剂分子结构进行了设计，得出了设计模型。结果表明，将含氮基团引入柴油降凝剂可以显著提高柴油降凝剂的性能。根据设计模型合成了一系列聚丙烯酸单酯和混合酯柴油降凝剂，并通过对柴油降凝剂的性能测试结果和自行设计的计算程序对设计模型进行了验证，结果表明，从柴油正构烷烃含量对柴油降凝剂的配比进行设计是可行的。     

Vapor pressure,speciation, and chemical activities in highly concentrated sodium borate solutions at 277 and 317°C

The system H₂O-B₂O₃-Na₂O has been studied experimentally at 277 and 317°C. The activities of water and boric acid have been determined at mole ratios Na/B from 0 to 1.5, and total dissolved solids 3 to 80 weight percent. The activity of boric acid has been fitted to within experimental error using a speciation model with eight complex species. This model is consistent with the model previously published by Mesmer et al. The electrolyte properties of the liquid are modeled using the Pitzer-Simonson model of very concentrated electrolyte solutions. The calculated values of water activity agree with experiment, and the activity of NaOH and pOH have also been calculated. The potassium borate system also was briefly studied at 317°C, and is adequately described by a model with five complex species. The potassium borate liquid is more alkaline at K/B= 1 than a sodium borate liquid at the same mole ratio, but pOH in the two systems is the same at lower mole ratios.     

Stabilization of a standard gas mixture generator with diffusion tubes

Summary The generator contains diffusion tubes of known length and internal diameter. Once produced, the mixture of the carrier gas and acetone, the reference material, is sent through a chromatographic flame ionisation detector. Its signal reaches a constant level after a time corresponding to the stabilization time of the generator. The technique described is simple and gives repeatable results.     

柴油机烟碳的微波加热燃烧Ⅲ.铜催化剂的影响

柴油机烟碳的微波加热燃烧Ⅲ．铜催化剂的影响吕晓慧马建新李平朱兵刘士宁（华东理工大学工业催化研究所，上海２００２３７）方明刘毅庭（香港科技大学研究中心）关键词柴油机烟碳，微波加热，催化燃烧，铜催化剂作者在前文［１，２］研究了柴油机烟碳的微波加热燃...     

Accurate Gaussian basis sets for the H2O molecule generated with the molecular improved generator coordinate Hartree–Fock method

The molecular improved generator coordinate Hartree–Fock (MIGCHF) method is used to generate accurate basis sets of primitive Gaussian-type functions for the H₂O molecule. Sequences of increasing size atom centered basis sets are employed to explore the accuracy that can be achieved with this method. Using the O(24s14p8d5f2g1h);H(22s9p5d2f1g) basis set, the HF and second-order electron correlation energies of the H₂O ground state at the experimental geometry are computed as −76.0674680 and −0.3491935 hartree, respectively. The HF energy is in error by 20 μhartree and the second-order correlation energy corresponds to 96.5% of an estimate of the limiting value. The relevance of the present calculations is to show the accuracy that can be achieved in studies of small polyatomic molecules with the MIGCHF method.