莰烯合成甲基丙烯酸异冰片基氧乙基酯的研究

以莰烯、乙二醇、甲基丙烯酸甲酯为原料,经过醚化和酯交换反应合成了光固化涂料用活性稀释剂甲基丙烯酸异冰片基氧乙基酯(IBOEMA),采用GC-MS、IR等分析手段对合成产物的结构进行了分析测定.在莰烯与乙二醇的醚化过程中,以A-15作醚化催化剂,探讨了A-15用量、乙二醇与莰烯的物质量之比、反应温度、反应时间等对异冰片基羟乙基醚得率的影响.采用正交试验确定了异冰片基羟乙基醚的适宜合成条件:催化剂A-15的用量为6.0％,反应温度90℃,反应时间9h,乙二醇与莰烯的物质量之比为3.5∶1.0.在此条件下,莰烯转化率、反应选择性及产物得率分别达79％、93％和74％以上.在异冰片基羟乙基醚酯交换合成IBOEMA过程中,以环己烷为溶剂,反应在回流状态下进行,探讨了催化剂种类及用量、异冰片基羟乙基醚与甲基丙烯酸甲酯物质的量之比、反应时间、阻聚剂的种类和用量等对IBOEMA得率的影响.通过正交试验确定了异冰片基羟乙基醚与甲基丙烯酸甲酯酯交换反应的适宜工艺条件:以环己烷为溶剂进行回流反应,环己烷与异冰片基羟乙基醚物质的量之比为37∶1,甲基丙烯酸甲酯与异冰片基羟乙基醚的物质量之比为1.25∶1.00,催化剂KOH的用量为3％,反应时间8h,吩噻嗪用量为1％.在此条件下,异冰片基羟乙基醚的转化率、反应选择性及产物得率分别达91％、93％和85％以上.     

纳米复合杂多酸催化合成萘乙醚

以纳米固载杂多酸H3PW12O40／SiO2为催化剂,β-萘酚和无水乙醇为原料,合成了β-萘乙醚,并研究了各种因素对产品收率的影响。该反应的最佳条件是：在酚醇物质的量比为1：3.5,催化剂用量为0.6g／0.04mol β-萘酚,反应时间的7h,β-萘乙醚的收率可达65.81％．     

合成二甲醚浆状催化剂的制备条件研究

介绍了二甲醚及其催化剂的合成方法.分别使用不同的溶剂置换凝胶中的水,并对催化剂进行活性评价和性能表征.通过实验证实不同置换溶剂对催化剂活性的影响.     

唐钢单机架冷轧机板凸度调控的计算机模拟

利用金属模型与辊系变形模型耦合分析方法,对宽带钢冷轧过程进行了仿真模拟,对不同的辊错动量、弯辊力条件下的冷轧金属及辊系形变进行了计算,分析了辊错动量、弯辊力与轧后板凸度的关系,得到了板凸度的最大调控范围,研究结果对生产中的板形控制有一定的借鉴作用。     

Three-dimensional numerical simulation of crown spike due to coupling effect between bubbles and free surface

The motion of gas bubbles beneath a free surface will lead to a spike of fluid on the free surface. The distance of the bubbles to the free surface is the key factor to different phenomena. When the inception distance varies in some range, crown phenomenon would happen after the impact of weak buoyancy bubbles, so this kind of spike is defined as crown spike in the present paper. Based on potential flow theory, a three-dimensional numerical model is established to simulate the motion of the free-surface spike generated by one bubble or a horizontal line of two in-phase bubbles. After the downward jet formed near the end of the collapse phase, the simulation of the free surface is performed to study the crown spike without regard to the toroidal bubble＇s effect. Calculations about the interaction between one bubble and free surface agree well with the experimental results conducted with a high-speed camera, and relative error is within 15%. Crown spike in both single- and two-bubble cases are simulated numerically. Different features and laws of the motion of crown spike, depending on the bubble-boundary distances and the inter-bubble distances, have been investigated.     

Poly(2‐vinyl pyridine)‐block‐Poly(ethylene oxide) Featuring a Furan Group at the Block Junction—Synthesis and Functionalization

Furfuryl glycidyl ether (FGE) represents a highly versatile monomer for the preparation of reversibly cross‐linkable nanostructured materials via Diels–Alder reactions. Here, the use of FGE for the mid‐chain functionalization of a P2VP‐b‐PEO diblock copolymer is reported. The material features one furan moiety at the block junction, P2VP₆₈‐FGE‐b‐PEO₃₉₀, which can be subsequently addressed in Diels–Alder reactions using maleimide‐functionalized counterparts. The presence of the FGE moiety enables the introduction of dyes as model labels or the formation of hetero‐grafted brushes as shell on hybrid Au@Polymer nanoparticles. This renders P2VP₆₈‐FGE‐b‐PEO₃₉₀, a powerful tool for selective functionalization reactions, including the modification of surfaces.

     

Poly(methyl vinyl ether‐alt‐maleic acid)‐Functionalized Porous Silicon Nanoparticles for Enhanced Stability and Cellular Internalization

Currently, developing a stable nanocarrier with high cellular internalization and low toxicity is a key bottleneck in nanomedicine. Here, we have developed a successful method to covalently conjugate poly(methyl vinyl ether‐co‐maleic acid) (PMVE‐MA) copolymer on the surface of (3‐aminopropyl)triethoxysilane‐functionalized thermally carbonized porous silicon nanoparticles (APSTCPSi NPs), forming a surface negatively charged nanovehicle with unique properties. This polymer conjugated NPs could modify surface smoothness, charge, and hydrophilicity of the developed NPs, leading to considerable improvement in the colloidal and plasma stabilities via enhanced suspensibility and charge repulsion. Furthermore, despite the surface negative charge of the polymer‐conjugated NPs, the cellular internalization was increased in both MDA‐MB‐231 and MCF‐7 breast cancer cells. These results provide a proof‐of‐concept evidence that such polymer‐based PSi nanocomposite can be extensively used as a promising candidate for intracellular drug delivery.

     

脂肪醇聚氧乙烯醚(3)磷酸酯盐的合成与性能

采用单因素试验方法考察五氧化二磷的加料方式、反应物用量比、反应温度和时间、单双酯含量等因素对合成脂肪醇聚氧乙烯醚(3)磷酸酯钠盐性能的影响,得到最佳工艺条件为:在强力搅拌下,五氧化二磷分批加料,n(脂肪醇聚氧乙烯醚(3))∶n(五氧化二磷)=2.5∶1.0,于60℃下酯化反应3 h,酯化产物于70℃下水解2 h,水量为酯化产物质量的4%.测定了产物的表面活性和应用性能:临界胶束浓度为7.94×10-5,表面张力为32×10-3 N/m,渗透力为25 s,乳化力为440 s,去污力为93.8%,毛效为10.3 cm,白度为85.9%.结果表明,该物渗透性、去污性较好,对织物煮练效果好,可作为织物前处理用理想的精炼助剂.     

Comparison between the use of polyether ether ketone and stainless steel columns for ultrasonic-assisted extraction under various ultrasonic conditions

The ultrasound-assisted extraction (UAE) was conducted using the stainless steel (SS) and polyether ether ketone (PEEK) columns and analyzed with high-performance liquid chromatography (HPLC) to understand the mechanism of ultrasound-assisted chromatography (UAC). Empty SS and PEEK columns were used to extract dyes from a fabric under identical conditions with several parameters including the initial ultrasonic bath temperatures (30 °C and 40 °C), ultrasound power intensities (0, 20, 40, 60, 80, and 100 %), ultrasound operation modes (normal and sweep), and ultrasound frequencies (25 kHz, 40 kHz, and 132 kHz) to compare their extraction capabilities. After 30 min of extraction, the amount of extract was determined by HPLC. The PEEK material was significantly affected by ultrasonic radiation compared to the SS material, especially at a higher temperature (40 °C), power intensity (100 %), and frequency (132 kHz) with sweep mode. At a maximum power density of 45 W/L, the extraction effectiveness ratio of PEEK to SS was in the range of 1.8 - 3.9 depending on the specific frequency, initial temperature, and with or without temperature control. The most optimal ultrasound frequencies, in terms of enhancing extraction effectiveness, are in the order of 132 kHz, 40 kHz, and 25 kHz. Unlike the SS material, the PEEK material was more affected by temperature and acoustic effects under identical conditions, especially at 132 kHz ultrasound frequency. In contrast, at lower frequencies of 40 kHz and 25 kHz, no significant differences in the acoustic effects were observed between the PEEK and SS materials. The findings of this study contribute to elucidating the roles of column materials in UAE and UAC.