Anion Exchange Membranes Based on Chloromethylation of Fluorinated Poly(arylene ether)s

This report details the properties of fluorine-containing anion exchange membranes(AEMs) synthesized by chloromethylation and quaternization of fluorinated poly(arylene ether)s(FPAEs) based on decafluorobiphenyl and bisphenol A. Meanwhile, we compared their properties with those of their non-fluorinated counterparts, Udel-based AEMs. The reactivity of the chloromethylation of fluorinated poly(arylene ether)s was lowered by the strong electron-withdrawing group, per-fluorinated biphenyl residue. Therefore higher temperature, more chloromethylation reagent, and longer reaction time were needed in the chloromethylation of FPAEs. Because of the hydrophobicity of fluorine, the swelling of FPAEs was depressed. In the FPAE-based AEMs, the water uptake of FPAE-1 membrane(F-1) was just 30%. There is a strong correlation between water uptake and conductivity for both Udel- and FPAE-based AEMs. Among all the membranes, the water uptake and the conductivity of FPAE-3 membrane(F-3) could reach up to 100% and 13.47 mS/cm respectively at 30 ℃. The mechanical properties of FPAE-based AEMs at room temperature were worse than those of Udel-based ones because of the weak intermolecular interaction caused by the low polarizability of fluorine. However, their high temperature mechanical properties are better, which can be explained in terms of low swelling.     

New Insight into Competition between Decomposition Pathways of Hydroperoxymethyl Formate in Low Temperature DME Oxidation

Hydroperoxymethyl formate is a crucial intermediate formed during the low-temperature oxidation of dimethyl ether. The decomposition pathways of HOOCH₂OCHO were calculated at QCISD(T)/CBS//B3LYP/6-311++G(d,p) level. The temperature- and pressure-dependent rate constants are computed using microcanonical variational transition state theory coupled with the RRKM/master equation calculations. The calculations show that a pathway leads to the formation of formic acid and a Criegee intermediate does exist, besides the direct dissociation channel to OH and OCH₂OCHO radicals. However, formation of the Criegee intermediate has never been considered as an intermediate in dimethyl ether combustion before. The computed rate constants indicate that the newly confirmed pathway is competitive to the direct dissociation route and it is promising to reduce the low-temperature oxidation reactivity. Also electronic effect of groups, e.g. -CHO and O atom, is taken into account. Moreover, Hirshfeld atomic charge and natural bond order analysis are performed to explain this phenomenon from a perspective of chemical nature.     

Hydrogen Production with Steam Reforming of Dimethyl Ether

Steam reforming of methanol and gasoline is actively researched and developed as hydrogen supply methods for the fuel cells of vehicles and so on. However, these materials have the problems such as the infrastructure, toxicity, difficulty of the reforming, and so forth. Dimethyl ether （DME） does not contain the poisonous substances, and is expected as a clean fuel of the next generation. DME is able to take the place of light oil and LPG, and its physical properties are similar to those of LPG. There is possibility that DME infrastructures will be settled more rapidly than those of hydrogen and methanol, because LPG infrastructures existing are able to use for DME. Then, we have been studying on steam reforming of DME for the hydrogen production.     

Improved Performance of Sulfonated Polyarylene Ethers for Proton Exchange Membrane Fuel Cell

The proton exchange membrane （PEM） is one of key components in fuel cell system. Its properties are very important in determining PEMFC performance. The membranes presently used in fuel cell are perfluorosulfonic polymaers, such as Nation from Dupont. Although they have high proton conductivity and excellent chemical stability, their too high production cast and methanol permeability lead to failure of fuel cell applica- tion. Therefore, various partially fluorinated and non-fluorinated polymer electrolytes are under development for PEMFC application since one decade. In the middle of non-fluorinated polymer electrolytes, sulfonated poly（arylene ether）s display high thermal stability, good mechanical properties and exceptional resistance to oxidation and acid catalyzed hydrolysis. They have been regarded as well-suited proton exchange membrane candidates for fuel cells.     

助剂SiO2对CO2加氢制二甲醚催化剂Cu-ZnO/HZSM-5性能的影响

 考察了助剂SiO2对CO2加氢合成二甲醚催化剂Cu-ZnO/HZSM-5性能的影响,并用X射线衍射、程序升温还原和X射线光电子能谱等手段对催化剂进行了表征. 结果表明,加入少量的SiO2即可显著提高CO2的转化率、二甲醚的选择性以及二甲醚和甲醇的总选择性,并降低副产物CO的选择性,同时改善催化剂的稳定性; 但SiO2加入量大时,催化活性反而降低. SiO2的存在可使焙烧后催化剂的晶型结构发生改变,促进CuO和ZnO的分散,并提高CuO的还原温度. SiO2的加入抑制了反应过程中催化剂上Cu0和ZnO晶粒的长大,对活性物种Cu0有稳定作用,从而有利于提高催化剂的活性和稳定性.     

乙醚团簇在纳秒激光场中的多价电离及其电子能量分布的研究

用5ns,1064nm的脉冲Nd:YAG激光,研究了乙醚团簇与纳秒激光的相互作用.在10¹¹ W/cm²量级光强下,观察到价电子完全剥离的O⁶⁺,C⁴⁺,且这些高价离子的强度比值基本不随激光能量而变化.用阻滞电压方法测量了电离过程中溢出电子能量分布,在最大激光能量4.0×10¹¹ W/cm²,溢出电子的平均能量为56eV,最大能量为102eV.实验结果支持了高价离子产生的“多 关键词： 高价离子 电子能量 纳秒激光 乙醚团簇     

Application of d-SPE before SPE and HPLC-FLD to Analyze Bisphenols in Human Breast Milk Samples

In this study, we propose a simple, cost-effective, and sensitive high-performance liquid chromatography with fluorescence detection (HPLC-FLD) for the simultaneous determination of seven bisphenols (bisphenol F (BPF), bisphenol E (BPE), bisphenol B (BPB), BADGE (bisphenol A diglycidyl ether), BADGE∙2H₂O, BADGE∙H₂O, BADGE∙2HCl) in human breast milk samples. The dispersive solid phase extraction (d-SPE) coupled with solid phase extraction (SPE) procedure performed well for the majority of the analytes with recoveries in the range 57–88% and relative standard deviations (RSD%) of less than 9.4%. During the d-SPE stage, no significant matrix effect was observed thanks to the application of different pairs of salts such as zirconium-dioxide-based sorbents (Z-Sep or Z-Sep +) and primary secondary amine (PSA) or QuEChERS Enhanced Matrix Removal-Lipid (EMR-Lipid) and PSA. The method limits of quantification (mLOQs) for all investigated analytes were set at satisfactory low values in the range 171.89–235.11 ng mL⁻¹. Analyte concentrations were determined as the average value from human breast milk matrix samples. The results show that the d-SPE/SPE procedure, especially with the application of EMR-Lipid and PSA, could be used for further bisphenol analyses in human breast milk samples.     

生物质合成气一步法合成二甲醚的在线分析系统

建立了一套由生物质合成气一步法制取二甲醚的在线分析系统.针对生物质合成气一步法合成二甲醚特征,采用两台分别装有TCD和FID检测器的色谱仪分析反应产物.利用原料气中N2作为内标物,来确定TCD上检测到的永久性气体组分浓度;通过CH4作内标物,来确定FID上检测到的有机物组分浓度.TCD和FID之间通过CH4来关联,从而确定反应产物中主要组分的浓度.该系统在压力3 MPa,温度250℃,空速(流速与催化剂体积的比值)分别为1 000、2 000、3 000 h-1的条件下用C306和HZSM-5催化剂进行评价测试,发现系统分析效果好,重复性高,并且反应前后主产物碳平衡到达90%以上.     

二苯基碘鎓盐引发乙烯基醚热聚合研究

合成了一种液态聚氨酯乙烯基醚预聚物 (PUE)并对其进行了表征 .研究发现二苯基碘六氟磷酸盐(PI810 )能够引发PUE和三缩乙二醇二乙烯基醚 (DVE 3)进行阳离子热聚合 ,热聚合温度远低于PI810的纯态热分解温度 ,且聚合转化率较高 .热聚合的机理初步认为是电子转移机理 .研究了乙烯基醚化合物、环氧树脂、二苯基碘六氟磷酸盐混合体系的热聚合 .     

壬基酚聚氧乙烯醚的冲击压缩实验研究

 利用二级轻气炮对有机大分子乳化剂壬基酚聚氧乙烯醚（C₃₅H₆₄O₁₁）进行了系列动高压加载实验。在11~42 GPa冲击压力范围内测量了7个Hugoniot数据。结果表明,在17.8 GPa处,该物质的Hugoniot曲线出现拐折。这一现象意味着在高温高压条件下,壬基酚聚氧乙烯醚体系的分子基团发生了结构性相变。