一种立体织机平行打纬机构的设计与优化

针对多层织物织造过程中,各层纬纱打纬力需保持一致以及需要减少钢筘与纱线之间摩擦的要求,提出八连杆平行打纬机构,并根据工艺要求对打纬机构进行优化。以打纬机构的主轴转动140°时,筘座在后心位置处的近似静止位移Δs最小为优化目标,通过Matlab软件分析确定设计变量,优化钢筘在后死心位置的近似停留时间。运动学仿真结果表明,优化后的打纬机构不仅保证了钢筘的打纬动程和其在后死心处的静止时间,而且增大了钢筘的惯性打纬力,有利于厚重织物的打纬。     

Bis-tridentate IrIII Phosphors Bearing Two Fused Five-Six-Membered Metallacycles: A Strategy to Improved Photostability of Blue Emitters

Iridium complexes bearing chelating cyclometalates are popular choices as dopant emitters in the fabrication of organic light-emitting diodes (OLEDs). In this contribution, we report a series of blue-emitting, bis-tridentate Ir^III complexes bearing chelates with two fused five-six-membered metallacycles, which are in sharp contrast to the traditional designs of tridentate chelates that form the alternative, fused five-five metallacycles. Five Ir^III complexes, Px-21 – 23 , Cz-4 , and Cz-5 , have been synthesized that contain a coordinated dicarbene pincer chelate incorporating a methylene spacer and a dianionic chromophoric chelate possessing either a phenoxy or carbazolyl appendage to tune the coordination arrangement. All these tridentate chelates afford peripheral ligand–metal–ligand bite angles of 166–170°, which are larger than the typical bite angle of 153–155° observed for their five-five-coordinated tridentate counterparts, thereby leading to reduced geometrical distortion in the octahedral frameworks. Photophysical measurements and TD-DFT studies verified the inherent transition characteristics that give rise to high emission efficiency, and photodegradation experiments confirmed the improved stability in comparison with the benchmark fac-[Ir(ppy)₃] in degassed toluene at room temperature. Phosphorescent OLED devices were also fabricated, among which the carbazolyl-functionalized emitter Cz-5 exhibited the best performance among all the studied bis-tridentate phosphors, showing a maximum external quantum efficiency (EQE_max) of 18.7 % and CIE_x,y coordinates of (0.145, 0.218), with a slightly reduced EQE of 13.7 % at 100 cd m⁻² due to efficiency roll-off.     

Autonomous system for data collection: Location and mapping issues in post-disaster environment

Disaster relief requires many resources. Depending on the circumstances of each event, it is important to rapidly choose the suitable means to respond to the emergency intervention. A brief review of the conditions and means demonstrated the usefulness of an autonomous stand-alone machine for these missions. If many techniques and technologies exist, their relevant combination to achieve such a system presents several challenges. This communication tries to outline the possible achievement of an autonomous vehicle under these particular circumstances. This paper focuses on the specific working conditions and welcomes future contributions from robotics and artificial intelligence.In the necessarily limited scope of this article, the authors focus on a particularly critical aspect: location. Indeed, this machine is intended to evolve in heterogeneous and dangerous environment and without any outside contacts that could last up to several days. This blackout, due to the propagation difficulties of electromagnetic waves in the ground, induces an independence of the localisation process and makes the use of any radio navigation support system (GNSS), most of the time, impossible. The knowledge of the position of the system, both for navigation of the autonomous system (Rover) and location of targets (victims buried under debris) must be able to be estimated without contributions from external systems. Inertial classical techniques, odometer, etc., have to be adapted to these conditions during a long period without external support. These techniques also have to take into account that energy optimisation requests the use of low-power processors. Consequently, only poor computing capacity is available on-board.The article starts with a presentation of the context of a post-disaster situation as well as the main missions of Search and Rescue (SaR). It is followed by the analysis of autonomous navigation located in a post-earthquake situation. We will then discuss means to determine the attitude of the autonomous system and its position. The interest of hybridisation with external systems – whenever possible –, will be evaluated with a view to correcting deviations suffered by the system during its mission. Finally, prospects and future work are presented.     

中职教学中FANUC系统数控车床对刀方法研究

在数控生产中,对刀是十分重要的一个环节.哪怕是有了正确的加工程序,也会因为不会对刀而加工出废品.加工质量的好坏与对刀的精度有着直接的关系,对刀的效率也极大地影响着加工效率,从而影响生产效率,影响生产成本.在学生的日常数控实习实训中,也总会出现很多对刀带来的问题.该文就以FANUC Oi 系列数控车床为例,通过原理和实例结合,研究常用的对刀方法.     

腔光子-自旋波量子耦合系统中各向异性奇异点的实验研究

通过耦合三维微波腔中光子和腔内钇铁石榴石单晶小球中的自旋波量子形成腔-自旋波量子的耦合系统,并通过精确调节系统参数在该实验系统中观测到各向异性奇异点.奇异点对应于非厄米系统中一种特殊状态,在奇异点处,耦合系统的本征值和本征矢均简并,并且往往伴随着非平庸的物理性质.以往大量研究主要集中在各向同性奇异点的范畴,它的特征是在系统参数空间中沿着不同参数坐标趋近该奇异点时具有相同的函数关系.在这篇文章中,主要介绍实验上在腔光子-自旋波量子耦合系统中通过调节系统的耦合强度和腔的耗散衰减系数两条趋近奇异点的路径而实现了各向异性奇异点,具体分别对应于在趋近奇异点时,本征值的虚部的变化与耦合强度和腔的衰减系数的变化会有线性和平方根不同的行为.各向异性奇异点的实现有助于基于腔光子-自旋波量子耦合系统的量子信息处理和精密探测器件的进一步研究.     

QEPAS系统中石英音叉模态仿真计算与研究

对石英音叉增强型光声光谱(QEPAS)系统中常用的石英音叉进行了有限元模态计算，获得石英音叉前6阶振型与模态频率，认知了第4阶对称摆动振型为有效振动，利用单因素法分析了石英音叉的音臂长度l₁、音臂宽度w₁、音臂厚度t、音臂切角θ、音臂圆孔直径d及音臂圆孔高度h对低阶有效共振频率(Fre)的影响，敏感度依次为： l₁> w₁>d>θ>t>h，考虑实际设计情形，筛选出了l₁，w₁，d与h四个石英音叉设计变量，采用Box-Behnken实验设计方案与RSM(response surface methodology)方法，以Fre为函数目标，建立l₁，w₁，d与h的二次回归响应面模型，得到了参数之间的交互作用，利用Design-Expert软件对响应面模型进行设计参数反求，结果表明，在15 000 Hz≤Fre≤25 000 Hz计算区域内误差较小，基本满足QEPAS系统的计算需求，所提出的研究与设计方法具有一定通用性，可为QEPAS系统中石英音叉结构参数设计提供参考。     

Every planar graph without 4-cycles adjacent to two triangles is DP-4-colorable

Wang and Lih (2002) conjectured that every planar graph without adjacent triangles is 4-choosable. In this paper, we prove that every planar graph without any 4-cycle adjacent to two triangles is DP-4-colorable, which improves the results of Lam et al. (1999), Cheng et al. (2016) and Kim and Yu [ arXiv:1709.09809v1].     

Comparative absorption kinetics of seven active ingredients of Eucommia ulmoides extracts by intestinal in situ circulatory perfusion in normal and spontaneous hypertensive rats

Eucommia ulmoides Oliv. (E. ulmoides) is a valuable and nourishing medicinal herb in China that has been used in the treatment of hypertension. Given the fact that most traditional Chinese medicine is mainly used to treat disease, investigating the pharmacokinetics of traditional Chinese medicines in the pathological state is more useful than that in the normal state. However, the differences in the absorption kinetics of active ingredients of E. ulmoides extract between pathological and physiological conditions have not been reported. Therefore, in this study, the rat intestinal in situ circulatory perfusion model was used to investigate the differences in absorption kinetics of seven active ingredients of E. ulmoides extract in normal and spontaneously hypertensive rats, namely, genipinic acid, protocatechuic acid, neochlorogenic acid, chlorogenic acid, cryptochlorogenic acid, (+)-pinoresinol di-O-β-D -glucopyranoside and (+)-pinoresinol 4′-O-β-D -glucopyranoside. Our results indicate that the pathological state of spontaneous hypertension may change the absorption of active components of E. ulmoides extracts, and these findings may provide a reference for improving the rational use of E. ulmoides in the clinic.     

Strong edge-coloring for planar graphs with large girth

A strong edge-coloring of a graph $G=(V,E)$ is a partition of its edge set $E$ into induced matchings. Let $G$ be a connected planar graph with girth $k\ge 26$ and maximum degree $\Delta$. We show that either $G$ is isomorphic to a subgraph of a very special $\Delta$-regular graph with girth $k$, or $G$ has a strong edge-coloring using at most $2\Delta +\lceil \frac{12(\Delta -2)}{k}\rceil$ colors.     

基于交通信号灯信息的混合动力汽车节能预测控制方法

针对传统混合动力汽车控制方法不考虑已知道路交通信号灯信息对车辆能量管理影响的问题,提出了基于交通信号灯信息的混合动力汽车节能预测控制智能优化策略。通过建立混合动力汽车系统的简化模型,并采用连续广义最小残量方法求解模型预测控制问题。运用MATLAB/Simulink进行仿真,仿真结果验证了交通信号灯信息模型的有效性,以及所设计的模型预测控制算法大幅度提高混合动力汽车的燃油经济性的能力和实时控制性能。研究结果表明所提出的控制策略可以实现车辆行驶轨迹的优化控制,显著提高了车辆的燃油经济性,并满足系统的实时最优控制要求。