Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

A novel approach for introducing particulate matter into thermal plasmas: The triple-cathode arc

A coalesced high-intensity dc discharge is maintained between three cathodes and a single anode, stabilized by using resistors on each cathode leg. Jets of plasma gas are produced from either the cathode area or the anode area of the device. Cathode jets are generated by the self-induced pumping at the cathode tips and augmented by central gas injection. Arc voltage-current characteristics show classical convection-stabilized arc behavior. Anode heat transfer rates may be substantially increased by central gas injection toward the anode. Temperature fields in the coalesced, axially symmetric portion of the arc are determined spectrometrically and compared to those of a classical single-cathode free-burning arc.     

CAHN－2000磁天平的调试与数据处理系统的研制

叙述了ＣＡＨＮ－２０００磁天平（美国）调试过程中如何解决液氮温区的测试，自制了磁天平与计算机的接口，编写了数据采集、处理和控制等高原 软件，节省了几万美元，部分指标超过原配套水平，三年来仪器在对国同外开放过程中，液氮温区的工作一直正常，实测了上千个样品，提供的数据已撰写数十篇文章在国内外刊物上发表。由此说明，要充分发挥进口仪器的使用效率，必须对仪器的工作原理、结构特点有透乇的了解，同时要有相当的自     

Calorimetric titration experiment modelled by equilibrium of 2:1 and 1:1 complexes

The analysis of the calorimetric continuous titration experiment is presented. The proposed method is basing on the collection of larger number of experimental data points than could be obtained from the classical isothermal titration calorimetry experiment. After the deconvolution procedure resulting in the correction for the calorimeter time response the pure power effect signal could be obtained. The collected data enable the detailed analysis of the closely populated 2:1 and 1:1 weak complexes.     

Extrudate swell behavior of PS and LLDPE melts in a dual die with mixed circular/slit flow channels in an extrusion rheometer

Extrudate swell behaviors of polystyrene (PS) and linear low‐density polyethylene (LLDPE) melts in a dual channel die, having mixed circular/slit flow channels, in a constant shear rate rheometer were examined. The extrudate swell ratio for PS melt was observed to be higher than that for LLDPE melt for all cases, this being associated with the differences in molecular structures that could be described in terms of power law indexes and secondary flows near the die entrance. In single channel die, the extrudate swell of both PS and LLDPE melts in circular flow channel die was greater than that in slit flow channel, whereas, in dual channel die the slit channel exhibited a higher extrudate swell ratio, the results being explained by revealing the flow patterns of the melt in the barrel and die of the rheometer. It was found that the dimensionless size of the vortex flows near the entrance, and the extent of disentanglement of molecular chains on entering the die were the important factors for the differences in the extrudate swell ratios of the melts at the die exit influenced by the die designs used. Copyright © 2003 John Wiley & Sons, Ltd.     

Experimental and Theoretical Studies of a Pulsed Microwave Excited Ar/CF4 Plasma

The present work deals with a pulsed microwave discharge in an Ar/CF ₄ gas mixture under a low pressure (1–10 mbar). The discharge chamber developed has a cylindrical geometry with a coupling window alternatively made of quartz or alumina. The setup allows one to investigate the plasma–wall interactions (here etching of the quartz window) and the ignition process of the pulsed microwave plasma. Microwave pulses with a duration of 50–200 s and repetition rate between 1 and 10 kHz are typical for the experiments. The space-time behavior of the fluorine number density in the discharge has been investigated experimentally by optical actinometry. The discharge kinetics is modeled using electron-transport parameters and rate coefficients derived from solutions of the Boltzmann equation. Together with the solution of the continuity and electron balance equations and the rate equations describing the production of CF _x (x=2, 3, 4) radicals and F atoms, a good agreement between experimental and theoretical data can be achieved.     

脑信息特征的评价分类方法

对脑信息处理的能力特征量和总体偏离度特征量进行了确定性评价分类.在分类数上,提出了common分类法,以一般人的特征作为分类基准,在common两边展开,以确定分类数.在分类边界上,提出了根据特征量的正态分布确定分类边界的方法.若特征量分布不是正态分布,则采用了博克斯和考克斯变换将其变为正态分布,最终得到能力特征量和总体偏离度特征量的分类规则.由于人的行为是脑信息处理在宏观上的表现,所以其研究成果可直接用来评价人的能力和行为特征.     

基于TMS320C5409的语音处理系统

介绍了一个基于DSP(TMS320C5409)的语音采集、编码、回放系统实例,对于DSP与CODEC芯片如何连接和配合工作提出了较为详细的解决方案,并从硬件、软件两个方面做出了说明.     

齿数大于100的质数直齿圆柱齿轮滚切加工方法

滚切齿数大于100的质数齿轮时,会因找不到合适的挂轮而影响加工。为解决这一问题,提出了“近似分齿”和“补偿”的加工方法,阐述了其加工原理、计算方法、误差分析。为其可行性提供了理论基础。经加工及检测得知,加工出的齿轮可达一般机械的精度要求。因此,实际加工中可采用近似分齿法和补偿法。