Recent advances in metal-organic frameworks for lithium metal anode protection

The lithium metal battery has been considered as a promising candidate for next generation batteries.However,safety concerns caused by uncontrollable lithium dendrite growth on lithium anode are severely hampering the commercial application.Metal-organic frameworks(MOFs)become one of the most attractive materials due to the high porosity,structural designability and tunability.With unique open channels and pores as well as functional components in MOFs,the transportation and deposition of lithium ions can be regulated,which leads to enhanced electrochemical prope rties.Various strategies for lithium metal protection are proposed in recent wo rks on applications of MOFs in lithium metal batteries.In this review,we highlight latest key approaches in this field and discuss the prospects for MOFs in advanced Li anodes.     

Dendrite‐Free Sodium Metal Anodes Enabled by a Sodium Benzenedithiolate‐Rich Protection Layer

Sodium metal is an ideal anode material for metal rechargeable batteries, owing to its high theoretical capacity (1166 mAh g^?1), low cost, and earth‐abundance. However, the dendritic growth upon Na plating, stemming from unstable solid electrolyte interphase (SEI) film, is a major and most notable problem. Here, a sodium benzenedithiolate (PhS₂Na₂)‐rich protection layer is synthesized in situ on sodium by a facile method that effectively prevents dendrite growth in the carbonate electrolyte, leading to stabilized sodium metal electrodeposition for 400 cycles (800 h) of repeated plating/stripping at a current density of 1 mA cm^?2. The organic salt, PhS₂Na₂, is found to be a critical component in the protection layer. This finding opens up a new and promising avenue, based on organic sodium slats, to stabilize sodium metals with a protection layer.     

Atomic-scale simulations for lithium dendrite growth driven by strain gradient

Dendrite formation is a major obstacle, e.g., capacity loss and short circuit, to the next-generation high-energy-density lithium (Li)-metal batteries. The development of successful Li dendrite mitigation strategies is impeded by an insufficient understanding in Li dendrite growth mechanisms. The Li-plating-induced internal stress in Li-metal and its effects on dendrite growth have been widely studied, but the underlying microcosmic mechanism is elusive. In the present study, the role of the plating-induced stress in dendrite formation is analyzed through first-principles calculations and ab initio molecular dynamic (AIMD) simulations. It is shown that the deposited Li forms a stable atomic nanofilm structure on the copper (Cu) substrate, and the adsorption energy of Li atoms increases from the Li-Cu interface to the deposited Li surface, leading to more aggregated Li atoms at the interface. Compared with the pristine Li-metal, the deposited Li in the early stage becomes compacted and suffers the in-plane compressive stress. Interestingly, there is a giant strain gradient distribution from the Li-Cu interface to the deposited Li surface, making the deposited atoms adjacent to the Cu surface tend to press upwards with perturbation and causing the dendrite growth. This provides an insight into the atomicscale origin of Li dendrite growth, and may be useful for suppressing the Li dendrite in Li-metal-based rechargeable batteries.     

铜树枝晶的水热合成以及结构表征和抗菌性能评价(英文)

在乙醇胺-水混合溶液中采用水热处理硫酸铜的方法制备了多结构的铜树枝晶;采用X射线粉末衍射仪、扫描电子显微镜、透射电子显微镜分析了所得样品的结构和形貌;采用牛津杯法评价了其对金黄葡萄球菌、枯草芽孢杆菌、大肠杆菌和绿脓杆菌的抗菌性能.结果表明,铜树枝晶由一个长的一级中心主干和许多高度对称分布在主干两侧的二级分支结构构成,且形貌均匀;反应温度、反应时间以及溶剂组成对铜树枝晶的形貌有很大影响.与此同时,铜树枝晶表现出选择性的抗菌行为,对金黄葡萄球菌、枯草芽孢杆菌和绿脓杆菌更有效.     

中性或弱酸性体系下锌基水系电池负极材料研究进展

锌具有原料丰富、质量轻便、金属导电性与延展性好以及理论比容量高等优势,可以作为绿色可充电电池的理想电极材料。其中,以中性或弱酸性水溶液为电解质、锌为负极的锌基水系电池具有安全性高、电池材料廉价无毒、制备工艺简单、环境友好等特点,在储能和动力电池领域具有极高的应用价值和发展前景。但电池充放电过程中伴随的锌枝晶、析氢、腐蚀、钝化等问题限制了其实际应用。本文综述了锌基水系电池负极存在的问题及当前的解决策略,并对其负极研究发展方向进行了展望。     

Phase field simulation of the columnar dendritic growth and microsegregation in a binary alloy

This paper applies a phase field model for polycrystalline solidification in binary alloys to simulate the formation and growth of the columnar dendritic array under the isothermal and constant cooling conditions. The solidification process and microsegregation in the mushy zone are analysed in detail. It is shown that under the isothermal condition solidification will stop after the formation of the mushy zone, but dendritic coarsening will progress continuously, which results in the decrease of the total interface area. Under the constant cooling condition the mushy zone will solidify and coarsen simultaneously. For the constant cooling solidification, microsegregation predicted by a modified Brody- Flemings model is compared with the simulation results. It is found that the Fourier number which characterizes microsegregation is different for regions with different microstructures. Dendritic coarsening and the larger area of interface should account for the enhanced Fourier number in the region with well developed second dendritic arms.     

灰铸铁中初生奥氏体树枝晶二维金相切面与三维空间结构之间的关系

本文应用晶体几何学原理,对灰铸铁中初生奥氏体树枝晶进行了解剖研究,发现金相试样中复杂纷乱的枝晶二维切面是不同位向的树枝晶沿一定晶面切开的结果。利用树枝晶二维和三维空间结构之间的几何对应关系,可以比较方便、准确地对树枝晶的生长方式及形貌特征进行分析和计算。     

Dendritic and eutectic growth in Sb<Subscript>60</Subscript>Ag<Subscript>20</Subscript>Cu<Subscript>20</Subscript> ternary alloy

The rapid solidification of Sb60Ag20Cu20 ternary alloy was realized by high undercooling method, and the maximum undercooling is up to 142 K (0.18TL). Within the wide undercooling range of 40-142 K, the solidified microstructures are composed of (Sb), θand ε phases. High undercooling enlarges the solute solubility of (Sb) phase, which causes its crystal lattice to expand and its crystal lattice constants to increase. Primary (Sb) phase grows in two modes at small undercoolings non-faceted dendrite growth is the main growth form; whereas at large undercoolings faceted dendrite growth takes the dominant place. The remarkable difference of crystal structures between (Sb) and θphases leads to (θ Sb) pseudobinary eutectic hard to form, whereas strips of θform when the alloy melt reaches the (θ Sb) pseudobinary eutectic line. The cooperative growth of θand ε phases contributes to the formation of (ε θ) pseudobinary eutectic easily. In addition, the crystallization route has been determined via microstructural characteristic analysis and DSC experiment.     

The nonexistence of sensitive commutative group actions on dendrites

In this paper, using the integral method observed by Mai Jiehua recently, we show that no dendrite admits a sensitive commutative group action.