Dendron to Central Core S1–S1 and S2–Sn (n>1) Energy Transfers in Artificial Special Pairs Containing Dendrimers with Limited Numbers of Conformations

Two dendrimers consisting of a cofacial free‐base bisporphyrin held by a biphenylene spacer and functionalized with 4‐benzeneoxomethane (5‐(4‐benzene)tri‐10,15,20‐(4‐n‐octylbenzene)zinc(II)porphyrin) using either five or six of the six available meso‐positions, have been synthesized and characterized as models for the antenna effect in Photosystems I and II. The presence of the short linkers, ‐CH₂O‐, and long C₈H₁₇ soluble side chains substantially reduces the number of conformers (foldamers) compared with classic dendrimers built with longer flexible chains. This simplification assists in their spectroscopic and photophysical analysis, notably with respect to fluorescence resonance energy transfer (FRET). Both steady‐state and time‐resolved spectroscopic measurements indicate that the cofacial free bases and the flanking zinc(II)–porphyrin antennas act as energy acceptor and donor, respectively, following excitation in either the Q or Soret bands of the dendrimers. The rate constants for singlet electronic energy transfer (k_EET) extracted from the S₁ and S₂ fluorescence lifetimes of the donor in the presence and absence of the acceptor are ≤ (0.1–0.3)×10⁹ and ～2×10⁹ s^?1 for S₁→S₁ (range from a bi‐exponential decay model) and about 1.5×10¹² s^?1 for S₂→S_n (n>1). Comparisons of these experimental data with those calculated from Förster theory using orientation factors and donor–acceptor distances extracted from computer modeling suggest that a highly restricted number of the many foldamers facilitate energy transfer. These foldamers have the lowest energy by molecular modeling and consist of one or at most two of the flanking zinc porphyrin antennas folded so they lie near the central artificial special pair core with the remaining antennas located almost parallel to and far from it.     

Polybenzimidazole dendrimer containing triazine rings-based high-temperature proton exchange membranes with high performances over a wide humidity range

A high-temperature proton exchange membrane with high proton conductivity over a wide humidity range still remains a challenge. PBI dendrimer containing triazine rings (TPBI) was synthesized to approach this aim considering its high content of hygroscopic terminal groups and of larger free volume. A novel proton conductor previously synthesized (zirconium 3-sulfopropyl phosphonate, ZrSP) was doped due to its good proton conductivity over a wide humidity range. TPBI was post-crosslinked with a tetrafunctional epoxy resin (N,N,N′,N′-tetraglycidyl-4,4′-diaminodiphenylmethane, TGDDM) to enhance the mechanical stability at low cross-linking degrees, which allowed high doping levels of ZrSP, and thus, high conductivity. The prepared membranes (TPBI-TGDDM/ZrSP) showed good thermal stability, high proton conductivity over wide humidity range, and good dimensional stability. At suitable degrees of branching, TPBI-TGDDM/ZrSP exhibited superior mechanical property, oxidative stability, methanol barrier property, and membrane selectivity than its linear analog (mPBI-TGDDM/ZrSP). As ZrSP instead of PA was applied as the proton conductor, TPBI-TGDDM/ZrSP showed good durability of proton conductivity, especially in comparison with TPBI-TGDDM/PA, which highly retarded decline in conductivity caused by PA leaking. The proton conductivity at 180 °C of TPBI(20)-TGDDM(10)/ZrSP(50) achieved 142, 84.2 and 23.6 mS cm^?1 at 100%, 50%, and 0 RH, respectively.     

Dendrimers Functionalized with Palladium Complexes of N-, N,N-, and N,N,N-Ligands

Pyridine, pyridine imine, and bipyridine imine ligands functionalized by a phenol have been synthesized and characterized, in many cases by X-ray diffraction. Several of these N-, N,N-, and N,N,N,-ligands have been grafted onto the surface of phosphorhydrazone dendrimers, from generation 1 to generation 3. The complexation ability of these monomers and dendrimers towards palladium(II) has been assayed. The corresponding complexes have been either isolated or prepared in situ. In both cases, the monomeric and dendritic complexes have been tested as catalysts in Heck couplings and in Sonogashira couplings. In some cases, a positive dendritic effect has been observed, that is, an increase of the catalytic efficiency proportional to the dendrimer generation.     

Preparation and Biosafety Evaluation of the Peptide Dendron Functionalized Mesoporous Silica Nanohybrid

Mesoporous silica nanoparticles (MSNs) have been extensively studied and proposed as promising candidates for numerous biomedical applications.In this study,we report the design,preparation,characterization and biosafety evaluation of peptide dendron functionalized mesoporous silica nanohybrid.This nanohybrid was prepared by surface modification of MSNs via click reaction of azido-MSNs with alkynyl peptide dendrons,and characterized by TEM,SEM,TGA,dynamic light scattering (DLS).In vitro cytotoxicity of the nanohybrid was evaluated against different cell lines by CCK-8 assay.The in vivo toxicity evaluation was measured by body weight shift,blood routine test and histological analysis,suggesting that the peptide functionalized nanohybrid possessed good biocompatibility due to the non-observed significant side effects to normal organs of healthy mice.Overall,considering our results we believe that the peptide dendron functionalized mesoporous silica nanohybrid is very promising in further biomedical applications.     

Adsorption performance and mechanism of Schiff base functionalized polyamidoamine dendrimer/silica for aqueous Mn(II) and Co(II)

Schiff base functionalized polyamidoamine (PAMAM) dendrimer/silica were prepared for the adsorption of aqueous Mn(II) and Co(II). The effects that influence the adsorption were investigated systematically and the adsorption mechanism was illustrated by theoretical calculation. The optimum adsorption pH are 4 and 6 for Mn(II) and Co(II). Adsorption kinetics follow pseudo-second-order model and the rate-controlling step is film diffusion process. Adsorption isotherm shows that high initial metal ion concentration facilitates the uptake of metal ions. The adsorption capacity increases first and then decreases in the temperature range of 15–35 °C. Density functional theory (DFT) calculation demonstrates that Schiff base functionalized PAMAM dendrimer tends to coordinate Mn(II) and Co(II) with the oxygen atoms of hydroxyl and carbonyl groups, nitrogen of tertiary amine and imino groups. The imino and tertiary amine groups mainly dominate the adsorption. The reproducibility of the adsorbents indicates they can be regenerated by 5% thiourea and 0.5 mol/L HNO₃ solution efficiently.     

树形聚醚的合成及其应用

树形聚合物高度支化,与线形结构的聚合物相比具有较低的粘度及良好的溶解性,而且其单分子尺寸通常在纳米尺度,在多方面具有广阔的应用前景。树形聚合物通常分为3种,即树枝状聚合物、超支化聚合物和树枝化聚合物。作为树形聚合物的主要一类,树形聚醚由于其良好的化学、物理稳定性,良好的水及有机溶剂的溶解性,以及生物相容性等诸多优点,其合成及应用研究得到了广泛重视。本文对不同种类树形聚醚的合成及其应用作一详尽的综述,包括树枝状聚醚、树枝化聚醚及超支化聚醚3种主要类型,同时报道了作者等在该领域的最新研究进展,并对该领域的研究进行了相应的展望。     

己二胺为核酯为端基的半代树枝状大分子的合成

以己二胺和丙烯酸甲酯为原料合成了以己二胺为核酯为端基的半代树枝状大分子,其结构经IR和元素分析表征。在己二胺50 mmol,n(丙烯酸甲酯)∶n(己二胺)=6∶1,于50℃反应12 h的条件下,收率99.4%。     

含氨基酸和多肽的树枝状化合物的合成与分子动力学模拟研究

合成了一系列以氨基酸和多肽为外周功能基团的醚-酰胺型树枝状化合物, 化合物结构经NMR, ESI-MS确证. 并对该系列化合物在水溶液中的状态进行了分子动力学模拟. 结果显示: 化合物的构象与原子数相关, 随原子数的增加有逐渐接近球形的趋势; 氨基酸α碳原子径向分布显示, 随着外周功能基团的增大, 分子可能存在部分卷曲构象.     

温度对聚酰胺-胺树形分子模板法制备CdS量子点的影响

为了研究温度对聚酰胺-胺(PAMAM)树形分子的模板法制备硫化镉(CdS)量子点的影响, 以4.5代(G4.5, 64个甲酯端基)PAMAM树形分子为模板, 在－10～30 ℃的温度范围内制备了分散良好的CdS量子点. 用透射电子显微镜(TEM)表征了CdS量子点的形貌、尺寸; 用紫外-可见光谱(UV-Vis)和光致发光光谱(PL)表征了CdS量子点的光学性能. 发现在相同条件下, 制备温度从－10 ℃升高到30 ℃, CdS量子点粒径从1.8 nm增大到3.4 nm, 其中在10 ℃时制备的量子点的尺寸分布最窄; CdS量子点的吸收和发射光谱均随温度增大而红移, 其中10 ℃时制备的量子点的室温光致发光效率最高. 这表明制备温度决定了树形分子的配位基团与Cd^2＋的分离速度, 并影响了CdS量子点的成核和生长过程, 从而最终决定了CdS量子点的尺寸及尺寸分布、光致发光颜色和发光效率.     

偶氮型光致变色液晶树状大分子的量子产率、异构转化率和活化能研究

研究了化合物端基含36个己氧基偶氮苯介晶基元的二代(G2)光致变色液晶树状大分子在氯仿及四氢呋喃溶液中的量子产率、吸收光强Ia、活化能E、异构转化率A/A0、热回复异构化速率常数kH及其反/顺异构体组分比A′/A′0,并与一代光致变色液晶碳硅烷树状大分子(G1)及介晶基元化合物(M3)的光化学行为进行了比较.在氯仿及四氢呋喃溶液中的量子产率的顺序均为M3>G1>G2,吸收光强Ia在氯仿及四氢呋喃溶液中的顺序分别为G2>G1>M3(氯仿)和M3>G1>G2(四氢呋喃),在氯仿及四氢呋喃溶液中活化能的顺序均为M3>G2>G1,在氯仿及四氢呋喃溶液中热回复异构化速率常数kH的顺序均为G1>G2>M3,在热回复异构化反应中的反/顺异构体组分比A′/A0′在氯仿及四氢呋喃溶液中的顺序均为G2>G1>M3.