制浆造纸企业管控一体化系统的层次分析

以制浆造纸企业管理与控制系统秋实际背景,运用ＡＨＰ原理,探讨了企业多目标、多层次 管控一体化系统的递阶结构。依次分析了战略性决策层、战术性决策层、作业管理层和生产控制层各层次内部的纵向组成结构和横向关联结构,以及各层次之间的相互关联。由此提出了企业管控一体化系统的理论构架和管理／控制原理。本研究结果对其他企业的管控一体化系统的研究亦有参考意义。     

Thermophysics of alkali and related azides II. Heat capacities of potassium,rubidium, cesium,and thallium azides from 5 to 350 K

The heat capacities of potassium, rubidium, cesium, and thallium azides were determined from 5 to 350 K by adiabatic calorimetry. Although the alkali-metal azides studied in this work exhibited no thermal anomalies over the temperature range studied, thallium azide has a bifurcated anomaly with two maxima at (233.0±0.1) K and (242.04±0.02) K. The associated excess entropy was 0.90 cal_th K^?1 mol^?1. The thermal properties of the azides and the corresponding structurally similar hydrogen difluorides are nearly identical. Both have linear symmetrical anions. However, thallium azide shows a solid-solid phase transition not exhibited by thallium hydrogen difluoride. At 298.15 K the values of C_p^o, S^o, and $\text{?{G}{}^{\mathrm{o}}\text{(T)?H}{}^{\mathrm{o}}\text{(0)}}\text{T}$, respectively, are 18.38, 24.86, and 12.676 cal_th K^?1 mol^?1 for potassium azide; 19.09, 28.78, and 15.58 cal_th K^?1 mol^?1 for rubidium azide; 19.89, 32.11, and 18.17 cal_th K^?1 mol^?1 for cesium azide; and 19.26, 32.09, and 18.69 cal_th K^?1 mol^?1 for thallium azide. Heat capacities at constant volume for KN₃ were deduced from infrared and Raman data.     

铝(Ⅲ)-桑色素-十二烷基硫酸钠体系在滤纸基质的荧光反应研究及其分析应用

本文探讨了在滤纸基质上表面活性剂SLS对铝-桑色素荧光反应的增敏作用及最佳实验条件。铝含量在0～6.0ng范围的工作曲线呈良好的线性关系(r=0.9998),方法的检测限为0.001ng。含铝4.0ng的溶液11次测定结果的相对标准偏差为4.3％。方法用于含铝水样的测定获得满意结果,回收率为96.0～100.5％。     

一种新的滤纸基质固体表面低温荧光(燐光)测定装置

对自行研制的铜制滤纸基质低温荧光（燐光）测定的样品支架，进行了滤纸基质固体表面低温荧光测定的可行性研究。与同类冷冻装置和室温装置比较，本装置用于滤纸基质固体表面低温荧光（燐光）测定具有以下优点；样品的分析周期大大地缩短，由45min缩短为5-6min；装置简单、便宜耐用；操作简便，简化了室温测定时的滤纸干燥程序，应用范围广，方法的重现性好，检样分析结果的相对标准偏差RSD%小于10%，荧光（燐光）分析灵敏度高，检出限低，线性范围宽。     

NMR investigation on the conformational properties of N-[2-pyridyl-N-oxide]-amino derivatives

The proton NMR spectra of N-[2-pyridyl-N-oxide]-derivatives of primary and secondary ethylamines, containing a substituent R on the C atom bearing the amino function, have been completely analysed in terms of the fundamental NMR parameters. The preferred conformations of the compounds investigated were established by the indications from NOE experiments as well as: (1) the long range coupling across the five bond between the aminic hydrogen and the proton in 4-position of the pyridine-N-oxide ring (⁵J_m^H,NH ～ 0·5 c/s), (2) the value of the vicinal coupling constant in the fragment CHNH (³J_NHCH ～ 7–9 c/s), (3) the large deshielding (Δτ ～ 1–1·5 ppm) observed for the resonance position of the proton on the asymmetric C atom in secondary amine derivatives with respect to the corresponding primary ones, and (4) the diamagnetic shielding produced on protons in position 3 and 4 of the pyridine-N-oxide ring by different aromatic groups introduced in the R substituent.The NMR data confirmed the preferred rotamers previously suggested on the basis of ORD and CD measurements.     

The stoichiometric hydrogenation of 9-methylidenefluorene and related compounds with hydridocobalt tetracarbonyl

9-Methylideneflourene (IIa) reacts rapidly with HCo(CO)₄ at -67° C to give a quantitative yield of 9-methylfluorene (IIIa); k₂  (13.4 ± 0.5) × 10^-2 l mol^-1_S^-1. Although the internal olefin, 9-ethylidenefluorene (IIb) reacts more slowly than IIa, it is hydrogenated about 2.5 times as fast as the terminal olefin, 1,1-diphenylethylene (I). Measurement of the rate of the reaction of IIb with DCo(CO)₄ and comparison with HCo(CO)₄ shows a very large inverse isotope effect k_H/k_D of 0.43.     

Liquid–paper interactions during liquid drop impact and recoil on paper surfaces

The spreading and recoiling of water drops on several flat and macroscopically smooth model surfaces and on sized paper surfaces were studied over a range of drop impaction velocities using a high-speed CCD camera. The water drop spreading and recoiling results on several model hydrophobic and hydrophilic surfaces were found to be in agreement with observations reported in the literature. The maximum drop spreading diameter for those model surfaces at impact was found to be dependent upon the initial drop kinetic energy and the degree of hydrophobicity/hydrophilicity of the surface. The extent of the maximum drop recoiling was found to be much weaker for hydrophilic substrates than for hydrophobic substrates. Sized papers, however, showed an interesting switch of behaviour in the process of water drop impaction. They behave like a hydrophobic substrate when a water drop impacts on it, but like a hydrophilic substrate when water drop recoils. Although the contact angle between water and hydrophilic or hydrophobic non-porous surfaces changes from advancing to receding as reported in literature, the change of contact angle during water impact on paper surface is unique in that the level of sizing was found to have a smaller than expected influence on the degree of recoil. Atomic force microscopy (AFM) was used to probe fibres on a sized filter paper surface under water. The AFM data showed that water interacted strongly with the fibre even though the paper was heavily sized. Implications of this phenomenon were discussed in the context of inkjet print quality and of the surface conditions of sized papers. Results of this study are very useful in the understanding of inkjet ink droplet impaction on paper surfaces which sets the initial condition for ink penetration into paper after impaction.     

Tying together the ultrastructural modifications of wood fibre induced by pulping processes with the mechanical properties of paper

The composition and ultrastructural arrangement of cell wall polymers in wood fibres have determining influence on the properties of wood derived materials. It is therefore important to improve our understanding of the relationship between fibres organisation, the modifications induced by pulping treatments, and the resulting paper sheet mechanical properties. The different treatments to which fibres are subjected during the manufacturing of pulps and papers induce morphological and micro-structural alterations due to the removal of wall constituents and of microfibrillar elements. The impact of pulping processes on fibres was investigated at the ultrastructural scale of transmission electron microscopy. Particular attention was given to the effects of beating in refiners at various intensities on the ultrastructure of fibres. The most characteristic effects consisted of delaminations, microfibril disorganisation, and even fractures, of varying importance depending on the intensity of the mechanical refining. The consequences of internal alterations and surface modifications of the fibres were examined in relation to the paper sheet mechanical properties. Correlations between the type of alteration observed in the fibres and its possible impact on a given paper mechanical property are suggested. With similar approaches, the effects of drying and recycling were studied.     

谈谈科技论文的写作

科技论文是科技工作者在科学研究领域的工作总结、经验积累以及科技成果发布的一个形式；是人们传递信息、描述说明各种事物的一个途径。重点从科技论文写作时的读者意识、科技论文的引言及结语3个方面叙述了如何写出具有领先水平、高质量、有价值的论文。     

《山西大学学报(自然科学版)》基金论文的统计分析

采用文献计量学方法，对《山西大学学报(自然科学版)》1994年～2003年刊载的基金论文数量、稿件来源、学科分布、论文合作度、项目来源等进行统计分析与归纳研究，结果表明：十年间《学报》刊载的基金论文的比例基本上呈逐年增长的趋势，尤其是2002年～2003年基金论文的刊载率超出高等学校自然科学学报评比标准中规定的年基金项目及重大课题论文达到40％刊载率的指标，基金论文居前三位的学科为数学、生命科学、化学学科，基金项目来源广泛，从量化的角度表明了《学报》的学术价值和学术水平，并在统计分析的基础上就进一步提高《学报》的学术质量提出了几点建议。