聚丙撑碳酸酯的辐射效应

研究了室温条件下聚丙撑碳酸酯(PPC)在钴-60和电子加速器辐照过程中的响应行为。结果表明,聚丙撑碳酸酯是一种辐射裂解型聚合物,其分子量随着辐射剂量的增加而减小。1mm厚PPC片材在室温和N2气保护条件下,其裂解G值为Gs,γ-ray=10.81;Gs,EB=4.9。不同的裂解G值表明,O2气在聚丙撑碳酸酯的辐射裂解过程中有重要影响。红外光谱研究表明,辐射后聚丙撑碳酸酯在3474cm-1处的峰宽峰高增加,表明其裂解后端—OH基增加。由于裂解作用,辐射后聚丙撑碳酸酯的抗张强度和断裂伸长率均下降。在通常的辐射消毒剂量范围内(25~50kGy),PPC的保留抗张强度大于23MPa,断裂伸长率大于4%,裂解后试样的力学性能依然能够满足实际应用需要,因此PPC可以经受辐射消毒。     

Synthesis of new hydrolyzable polyurethanes from L‐gulonic acid‐derived diols and diisocyanates

New polyurethanes with lactone groups in the pendants and main chains were synthesized by the polyaddition of two kinds of L ‐gulonolactone‐derived diols (2,3‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone and 5,6‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone) with hexamethylene diisocyanate and methyl (S)‐2,6‐diisocyanatohexanoate and by the subsequent deprotection of isopropylidene groups. They were hydrolyzed more quickly than the polyurethane derived from methyl β‐D ‐glucofuranosidurono‐6,3‐lactone in a phosphate buffer solution, the pH value of which was 8.0, at 27 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4158–4166, 2002     

Thermodynamic stability of polyacrylamide and poly(N,N‐dimethyl acrylamide)

Based on theoretical thermodynamic principles, the possibility of environmental degradation of polyacrylamide to its starting monomer was investigated. Theoretical electronic structure studies on the geometry and fragmentation energy of acrylamide and N,N‐dimethyl acrylamide tetramer models were carried out using a first principles gradient corrected density functional approach. Thermal degradation to form a radical would require the cleavage of carbon–carbon bonds in the polymer chain; the energy needed for this cleavage was found to depend on the structure of the repeat unit which ranged from low of 72.5 kcal for a rare head‐to‐head construct to 86.2 kcal for a normal head‐to‐tail polymer construct (therefore, for the cleavage of a normal head‐to‐tail repeat unit, temperatures of approximately 450°C would be required). The thermodynamics of the unzipping, disproportionation, and back‐biting reactions in the resulting radical fragments were also investigated; the back‐biting process was found to require the least energy and provided the most stable radical fragment with a low probability for disproportionation or releasing of monomer to occur. The effect of solvation on the hydrogen‐bonding network in the acrylamide tetramer was studied by adding explicit molecules of water to the tetramer models. The addition of water had a significant effect on the stability of the model polymer slightly stabilizing the head‐to‐head polymer, and slightly destabilizing the head to tail polymer. Copyright © 2007 John Wiley & Sons, Ltd.     

Development of a novel potentiometric titration method for determination of polypropylene degradation

In this study, a novel potentiometric titration of hydroperoxide in degraded polypropylene (PP) is proposed. This titration is quite sensitive compared with the conventional ones such as UV and manual titrations, and its detection limit was about 2 meq/kg. The sensitivity was equal to that of molecular weight measurement by GPC for the degraded PP and, in addition, the volatilization behavior of the hydroperoxide could be detected. This titration was found to be very effective for the determination of PP degradation.     

Effects of EG and MoSi2 on thermal degradation of intumescent coating

An intumescent flame retardant coating was prepared with resin, solvent and flame retardant system composed of ammonium polyphosphate-APP, pentaerythritol-PER and melamine-MEL. The modifiers such as molybdenum disilicide (MoSi₂) and expandable graphite (EG) were used to improve the performances of the APP-PER-MEL coating. The effects of EG, MoSi₂ and MoSi₂/EG on the fireproofing time and char formation of the coating were investigated by using heat insulation test, thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electric microscope (SEM). The results showed that by adding modifiers, the fireproofing time was prolonged and char formation rate was evidently enhanced. The largest improvement was achieved with 9 wt.% MoSi₂/5 wt.% EG, XPS analysis indicated that the performance of anti-oxidation of the coating was improved by adding EG and MoSi₂, and SEM images showed that a good synergistic effect was obtained through a ceramic-like layer produced by MoSi₂ covered on the surface of “open-cellular” structural char.     

Comparison of EI and metastable atom bombardment ionization for the identification of polyurethane thermal degradation products

Polyurethanes are widely used in the manufacture of commercial products such as foams and paints. During combustion, these polymers can generate isocyanates, which induce adverse health effects. Polymer pyrolysis (Py) hyphenated with mass spectrometry (MS) allows the investigation of polymer thermal degradation over time/temperature. A diphenylmethanediisocyanate (MDI) polyurethane foam was analyzed with electron ionization (EI) and metastable atom bombardment (MAB) ionization at a pyrolysis temperature of 400 °C. The recently introduced MAB ionization source uses discrete energy stored in metastable atoms of gases to ionize the analytes. This characteristic allows modulation of the ionization energy by simply changing the ionization gas. The extensive fragmentation of molecular ions observed using EI 70 eV is not totally eliminated with EI 10 eV. However, only molecular ions are observed with MAB using N₂ as the ionization gas. Temperature gradients were used to separate the products generated during the thermal degradation of a 1,6-hexamethylenediisocyanate (HDI) polyurethane paint. The analysis of mass spectra was facilitated owing to a selective desorption of pyrolysis products. Furthermore, changing the MAB ionization gas allows elucidation of the structure of the pyrolysis products by controlling the extent of their fragmentation. During these experiments, isocyanic acid, methyleneisocyanate, ethyleneisocyanate, propylisocyanate and butylisocyanate were detected.     

Investigation on the thermal degradation of acrylic polymers with fluorinated side-chains

The thermal degradation of poly-2,2′,3,3′,4,4′,5,5′,6,6′,7,7′,7″-tridecafluoroheptylacrylate and poly-2,2′,3,3′,4,4′,5,5′,6,6′,7,7′-dodecafluoroheptylmethacrylate has been studied in isothermal conditions at 450-750 °C using pyrolysis-gas chromatography. The type and composition of the pyrolysis products give useful information about mechanism of thermal degradation. It was shown that the main thermal degradation process for both polymers is random main-chain scission. The major degradation products for fluorinated polyacrylate are monomer, dimer, saturated diester, trimer, and corresponding methacrylate. The fluorinated polymethacrylate gives monomer as the main product of thermal destruction. As a result of side-chain reaction, the thermal degradation of the fluorinated polyacrylate also produces remarkable amounts of alcohol. On the other hand, the respective alcohol is only a minor component among the pyrolysis products of the fluorinated polymethacrylate. For both polymers, the main nontrivial degradation product coming from the alkyl ester decomposition is the corresponding fluorinated cyclohexane. The formation of the fluorinated cyclohexanes may be accounted for a nucleophilic bimolecular substitution pathway.     

Selective degradation of lignin and elimination of HO radicals in pulps by O<Subscript>3</Subscript> and UV laser flash irradiation

HO^. radical is an aggressive reagent to abstract hydrogen from diverse substitutes and lead them to degradation, however, in reaction of active oxygen species with lignins, complex phenolic polymers, in dispersed lignocellulose such as pulp for environment-benign delignification, HO^. radicals should be eliminated as more as possible to prevent cellulose from unfavorably concomitant degradation. A reaction system of O₃ is constructed under UV laser flash irradiation, and HO^. radicals are controlled efficiently by it. A new mechanism is proposed, for the first time, that O^. radicals generated from reaction of O₃ with UV laser flash irradiation might be the contributor to scavenge HO^. radicals.     

TG and DSC studies of filled porous copolymers

A complex approach including thermogravimetry, differential thermal analysis and differential scanning calorimetry was applied to study characteristics of non-filled and filled porous copolymers of divinylbenzene with styrene or some acrylic monomers: di(methacryloyloxymethyl)naphthalene, methacrylic ester of p,p’-dihydroxydiphenylpropane diglycidyl ether, and dimethacrylglycolethylene. High disperse silicas with the grafted methyl and silicon hydride groups in the surface layer were used as fillers. The kinetic parameters of thermal degradation for composites obtained were determined by different methods.     

催化湿式氧化中铜基催化剂的流失与控制

 制备了催化湿式氧化处理有机废水用铜基催化剂，并用XRD，XRF和TG－DTG等手段对催化剂进行了表征，对催化剂及其前驱体的组成和结构进行了分析鉴定．结果表明，由类水滑石结构的前驱体焙烧得到的催化剂Cu－Al－Zn－O，其活性组分铜的流失得到了控制；在氧化降解苯酚、十二烷基苯磺酸钠和磺基水杨酸时，在初始氧分压0．5MPa和160～220℃的反应条件下，催化剂活性组分铜的流失量小于0．3mg／L．对催化剂活性组分不易流失的原因进行了理论解释和计算．