Design and fabrication of fluid controlled dynamic optical lens system

A novel small fluid controlled optical lens system that is capable of displaying dynamic variation of its focal length and field-of-view (FOV) is designed and fabricated. In this active lens system, appropriate volume of the optical fluid can be pumped into or out of the lens chamber to provide double-convex (DCX) or double-concave (DCV) lens effect. Simple optical imaging experiments were performed using different sets of glass lenses with fixed focal lengths to determine the optimum lens configuration required for designing a dynamic optical lens system. The experimental results obtained from the glass lenses demonstrate that a combination of a single DCX lens with three DCV lenses provides a wider FOV. The flexible membranes for fluid controlled lenses were fabricated using polydimethylsiloxane polymer material, which has good optical transparency and elasticity. A simple fluid injection system is used to vary the radius of curvature of the lenses, and thereby to change the focal length. A dynamic optical lens system with a combination of one DCX and multiple variable focal length DCV lenses as designed here can image an object with a wide range of focal length and FOV. With this fluid controlled optical system, the FOV and focal length could be continuously varied and a maximum FOV of 118.3° could be achieved. The smallest f-number (f_/#) for this fluid controlled single lens system was found to be 1.3, which corresponds to the numerical aperture value of 0.35.     

The number of ideals in a quadratic field

LetK be a quadratic Geld, and letR(N) be the number of integer ideals inK with norm at most AT. Letx with conductork be the quadratic character associated withK. Then |R(N)−NL(1,x)|⩽Bk ^50/73 N ^23/73(logN)^461/146 forN ≥Ak, whereA andB are constants. ForN ≥Ak ^c,C sufficiently large, the factork ^50/73 may be replaced by (d(k))^4/73 k ^46/73. Dedicated to the memory of Professor K G Ramanathan     

喷射成形过程中雾化锥体的温度场与质量场

本文着重研究了喷射成形过程中雾化锥体的温度场与质量场的测定方法，进一步测定了纯铝及ＺＱＳｎ６－６－３青铜的温度场和质量场，并讨论了其特征。     

格兰·泰勒棱镜两类视场角的比较研究

以格兰·泰勒棱镜为例 ,推导了沿主截面和垂直主截面两正交方向的最大视场角 ,并在常用结构角下比较了两类视场角的大小及它们随波长的变化关系 ,得知沿主截面的视场角对光路调整影响较大     

基于MAX155和KMZ52的电子指南针的实现

介绍了电子指南针的工作原理，采用高速A／D转换器MAX155，完成了对KMZ52二维磁阻传感器输出信号的同时采样，提高了系统的精度．同时，采用跳转技术对偏差及温度漂移进行了补偿，减少了温度等因素对本系统造成的影响．     

三角形速度场解析平面变形辊拔与辊挤

文章对平面变形辊拔与辊挤问题建立了运动许可的三角形速度场并获得上界解析解。该解与 Avitzur 以连续速度场得到的上界解进行比较表明,有时本文解法可得到更低的上界值。     

一些非线性发展方程的显式行波解

该文给出了一种构造非线性发展方程显式行波解的方法并用该方法得到了Hirota-Satsuma方程组,一类非线性常微分方程以及广义耦合标量场方程组的显式行波解.     

粗可能性测度

给定模糊可测空间(X，A)及(X，A)上的可能性测度，通过应用粗集理论，将可能性测度Ⅱ和模糊糊积分分别扩充至P(X)和F(X)上，从而引入粗可能性测度的概念。     

缓凝砂浆螺旋输送理论研究

缓凝预应力筋包覆装置是将新型独特的缓凝材料应用于预应力混凝土体系的一种施工设备．通过对缓凝砂浆的流变性能分析，建立了螺旋输送物理模型，运用粘性流体力学的运动微分方程研究缓凝砂浆螺旋输送的速度场和流率，从而对其装置的设计和运行参数的合理选择提供了理论依据．