Mindlin层合圆柱壳理论的Hamiltonian结构与辛解析解

通过引进状态变量及其对偶变量。建立Ｍｉｎｄｌｉｎ层合圆柱壳的Ｈａｍｉｌｔｏｎ正则方程．在辛几何数学框架下，采用共轭辛正交归一关系给出各种复杂边界条件下的精确解．     

Divinylsiloxane‐bisbenzocyclobutene‐based polymer modified with polystyrene–polybutadiene–polystyrene triblock copolymers

Divinylsiloxane‐bisbenzocyclobutene (DVS‐bisBCB) polymer has very low dielectric constant and dissipation factor, good thermal stability, and high chemical resistance. The fracture toughness of the thermoset polymer is moderate due to its high crosslink density. A thermoplastic elastomer, polystyrene–polybutadiene–polystyrene triblock copolymer, was incorporated into the matrix to enhance its toughness. The cured thermoset matrix showed different morphology when the elastomer was added to the B‐staged prepolymer or when the elastomer was B‐staged with the DVS‐bisBCB monomer. Small and uniformly distributed elastomer domains were detected by transmission electron micrographs (TEM) in the former case, but TEM did not detect a separate domain in the latter case. A high percentage of the polystyrene–polybutadiene–polystyrene triblock copolymer could be incorporated into the DVS‐bisBCB thermoset matrix by B‐staging the triblock copolymer with the BCB monomer. The elastomer increased the fracture toughness of DVS‐bisBCB polymer as indicated by enhanced elongation at break and increased K1c values obtained by the modified edge‐lift‐off test. Elastomer modified DVS‐bisBCB maintained excellent electrical properties, high T_g and good thermal stability, but showed higher coefficient of linear thermal expansion values. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1591–1599, 2006     

聚丙烯/POE共混组成对材料断裂行为的影响

采用基本断裂功(EWF)方法对聚丙烯(PP)/聚烯烃弹性体(POE)共混物的注射双边缺口拉伸试样的断裂行为进行了研究,比较了不同POE含量对共混物各断裂参数的影响.结果表明,PP和用量为5phr POE的共混物都可完全满足EWF方法的要求,共混物的断裂韧性-比基本断裂功we,较PP有显著提高;POE用量为10phr以上的共混物则出现明显的成颈现象而限制了EWF方法的应用;PP和各种POE用量的共混物都得到了其屈服所需要的比基本断裂功we,y和比塑性功β′wp,y.     

Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy

Recent developments in quantitative surface analysis by Auger (AES) and x-ray photoelectron (XPS) spectroscopies are reviewed and problems relating to a more accurate quantitative interpretation of AES/XPS experimental data are discussed. Special attention is paid to consideration of elementary physical processes involved and influence of multiple scattering effects on signal line intensities. In particular, the major features of core-shell ionization by electron impact, Auger transitions and photoionization are considered qualitatively and rigorous approaches used to calculate the respective transition probabilities are analysed. It is shown that, in amorphous and polycrystalline targets, incoherent scattering of primary and signal Auger and photoelectrons can be described by solving analytically a kinetic equation with appropriate boundary conditions. The analytical results for the angular and energy distribution, the mean escape depth, and the escape probability as a function of depth of origin of signal electrons as well as that for the backscattering factor in AES are in good agreement with the corresponding Mote Carlo simulation data. Methods for inelastic background subtraction, surface composition determination and depth-profile reconstructions by angle-resolved AES/XPS are discussed. Examples of novel techniques based on x-ray induced photoemission are considered.     

接枝和交联对纳米Si02改性NR／PP共混型热塑弹性体的影响

动态硫化制备纳米二氧化硅（SiO2）改性天然橡胶，聚丙烯共混型热塑性弹性体（NR/PPTPE）．研究了马来酸酐，苯乙烯，过氧化二异丙苯（MAH／St／DCP）多单体“就地”熔融接枝、交联对TPE力学性能、耐溶剂性能和耐热变形性能的影响，并用SEM分析了TPE的断面形貌．结果表明：纳米SiO2和MAH／St／DCP的最佳质量分数分别为0．03和0．0375／0．0188／0．00375时，MAH／St／DCP接枝、交联改性NR／PP／纳米SiO：TPE的力学性能、耐溶剂性能和耐热变形性能最佳．MAH／St／DCP“就地”接枝、交联通过细化交联NR分散相、改善交联NR分散的均匀性和增加两相之间的共交联，使NR与PP两相界面结合强度明显提高，NR／PPTPE的综合性能得到明显的改善．     

A new synthetic pathway of segmented tri-block copolyether

A new synthetic pathway of A–B–A tri-block copolyether which is composed of a hydrophilic poly(oxyethylene) unit as an A part and a hydrophobic poly(oxy-2-methyl-trimethylene) unit as a B part is proposed. Telechelic α-tosyl-ω-tosyloxypoly(oxy-2-methyl-trimethylene) derived from tosylation of poly(oxy-2-methyl-trimethylene glycol) (PMTG) was allowed to react with poly(ethylene glycol) (PEG) in the presence of sodium hydroxide. T_g of the resulting A–B–A tri-block copolyether (PEMG) (M?_n = 1600) was ?72°C and its specific gravity [D₄¹⁵] was 1.055.     

聚碳酸酯改性聚酯型热塑性聚氨酯弹性体的合成与性能

以聚碳酸１，６－已二醇酯（ＰＣ）、聚己二酸－１，４－丁二醇酯（ＰＢＡＧ）、４，４－二苯基甲烷二异氰酸酯（ＭＤＩ）和１，４－丁二醇（ＢＤＯ）为原料，合成线型聚碳酸酯改性聚酯型热塑性聚氨酯弹性体（ＴＰＣＺＥ）．对其玻璃化转变温度Ｔｇ、力学性能、耐水解性能和流变特性进行了研究。实验结果表明：随ＰＣ二醇含量的增加，弹性体的贮能模量下降，Ｔｇ则向高温方向（从－７．８℃到＋２．６℃）移动。水解后的强度保持率从８５．４％提高到９９，７％和１１７％，熔体的表现粘度降低，加工性能得到改善。     

A conductive elastomer based on EPDM and polyaniline: II. Effect of the crosslinking method

Electrically conductive heterogeneous binary polymer blends based on ethylene-propylene-diene-monomer (EPDM) and polyaniline (PAni) were prepared in a Haake Rheocord 90 rheometer, coupled with an internal mixer (counter rotating cam rotors) using different amounts of PAni doped with dodecylbenzenosulfonic acid (DBSA). Blends were crosslinked using two methods: (i) phenolic resin (SP-1045) as crosslinking agent and (ii) electron beam irradiation. The last method avoids the interference of the acid dopant in the crosslinking process and produces blends with higher conductivity.     

一种磁流变弹性体执行器的联合优化方法研究

磁流变弹性体（magnetorheological elastomer, MRE）执行器作为智能减振应用系统的核心元件,其结构的优化是决定执行器性能上限及系统控制成效的关键。针对目前MRE执行器优化方法及理论研究欠缺的问题,文中面向一款横向隔振的MRE执行器,基于其机械结构和有效磁路,以优越磁控性能、低功耗和快速响应时间为优化目标,提出了一种新的MRE执行器联合参数优化方法。首先,基于MATLAB和COMSOL的联合仿真,将遗传优化算法和电磁有限元分析方法进行有效结合,实现对MRE执行器的优化编程;其次,完成对器件的全局尺寸结构优化设计,使得器件具备优越磁控性能（526.21 mT）、低功耗（44.05 W）及快速响应（5.43 ms）;最后,通过搭建测试系统对优化后装配的MRE执行器进行测试和评估,验证了文中优化方法的可行性和有效性。提出的联合优化方法不仅适用于MRE执行器结构,还可为多领域减/隔振应用的共性MRE器件优化设计提供理论参考。     

腔靶X射线辐射对称特性实验观测

在“神光”装置上用两种特殊结构的实验靶型,通过两个不同方位的诊断孔观测腔内壁Ｘ光再辐射的空间能谱结构和Ｘ光辐射总量,分别研究了与激光第一打击面完全对称和不对称的腔内壁（两个被观测位置相差９０°）Ｘ光辐射能谱和辐射能量的对称性,并对测量结果进行了简要的分析讨论．