Towards the synthesis of [15]-membered stevastelins through the 2,3-epoxy analogues

A synthetic approach to the [15]-membered stevastelins, a novel class of immunosuppressant agents, is reported based on a macrolactamization route to the 2,3-epoxy derivative 6. The synthesis of this compound was achieved via a stereoselective epoxidation of the allylic alcohol 13, followed by a coupling reaction with a variety of peptide derivatives to give the epoxy peptides 7-10. After an extensive study of cyclizations with these precursors, the best result was achieved with the macrolactamization of 8 in the presence of DEPC, to obtain the epoxy cyclic depsipeptide 6 in 42% yield. From this product, an epoxy analogue of stevastelin B, compound 27, was prepared. Finally, the synthesis of the natural product was attempted through the opening of the oxirane ring contained in 6 and 26, with a variety of methyl cuprate reagents, but without success.     

安力农的极谱测定及其电化学行为

在ｐＨ５．６，０．１５ｍｏｌ／Ｌ磷酸盐缓冲溶液（ＰＢＳ）中，得到了安力农的灵敏极谱吸附波，波的二阶导波高在２×１０＾－８～８×１０＾－６ｍｏｌ／Ｌ范围内与安力农的浓度成直线关系，检测下限为１×１０＾－８ｍｏｌ／Ｌ，测定出电极过程的电子传递系数ａ＝０．４３，表面电极反尖速率常数ｋｓ＝３．３ｓ＾－１，安力农在汞电极上的吸附遵从Ｌａｎｇｍｕｉｒ等温式，测得其吸附系数β＝８．１×１０＾５。     

聚碳酸酯合成工艺开发的新进展

本文从工艺开发的角度，简要评介了目前聚碳酸酯两大工业生产工艺，即光气化界面缩聚工艺和熔融酯交换缩聚工艺的研究开发新动向。     

Crystal and molecular structure of a 1:1 complex of a chiral α-d-glucosido-benzo-18-crown-6 and potassium thiocyanate

C₂₈H₃₆O₁₀. KSCN is monoclinic, space groupP2₁ withZ=2,a=10.390(3),b=8.959(7),c=16.377(7) Å, =92.49(5)°. FinalR=0.053 for 1437 reflections measured at room temperature. The K^– ion lies on the least-squares plane formed by the six oxygen atoms in the macrocyclic ring. The SCN^– ion was found on the same face of the macrocycle as the chiral glucopyranoside moiety.Methyl-4,6-O-benzylidene-2,3-O-(1,2-bis(ethoxyethoxy)benzenediyl)--d-glucopyranoside.     

Synthesis of a model cyclic triblock terpolymer of styrene,isoprene, and methyl methacrylate

The synthesis of a model cyclic triblock terpolymer [cyclic(S‐b‐I‐b‐MMA] of styrene (S), isoprene (I), and methyl methacrylate (MMA) was achieved by the end‐to‐end intramolecular amidation reaction of the corresponding linear α,ω‐amino acid precursor [S‐b‐I‐b‐MMA] under high‐dilution conditions. The linear precursor was synthesized by the sequential anionic polymerization of S, I, and MMA with 2,2,5,5‐tetramethyl‐1‐(3‐lithiopropyl)‐1‐aza‐2,5‐disilacyclopentane as an initiator and amine generator and 4‐bromo‐1,1,1‐trimethoxybutane as a terminator and carboxylic acid generator. The separation of the unreacted linear polymer from the cyclic terpolymer was facilitated by the transformation of the unreacted species into high molecular weight polymers by the evaporation of the reaction solvent and the continuation of the reaction under high‐concentration conditions. The intermediate materials and the final cyclic terpolymer, characterized by size exclusion chromatography, vapor pressure osmometry, thin‐layer chromatography, IR and NMR spectroscopy, exhibited high molecular weight and compositional homogeneity. Dilute‐solution viscosity measurements were used as an additional proof of the cyclic structure. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1476–1483, 2002     

Molecular structure of ethynylbenzene from electron diffraction and ab initio molecular orbital calculations

The molecular structure and benzene ring distortions of ethynylbenzene have been investigated by gas-phase electron diffraction and ab initio MO calculations at the HF/6-31G^* and 6-3G^** levels. Least-squares refinement of a model withC _2v, symmetry, with constraints from the MO calculations, yielded the following important bond distances and angles:r _g(C _i -C _o )=1.407±0.003 Å,r _g(C _o -C _m )=1.397±0.003 Å,r _g(C _m -C _p )=1.400±0.003 Å,r _g(Cr _i -CCH)=1.436 ±0.004 Å,r _g(C=C)=1.205±0.005 Å, C _o -C _i -C _o =119.8±0.4°. The deformation of the benzene ring of ethynylbenzene given by the MO calculations, including o-C_i-C_o=119.4°, is insensitive to the basis set used and agrees with that obtained by low-temperature X-ray crystallography for the phenylethynyl fragment, C₆H₅-CC-, in two different crystal environments. The partial substitution structure of ethynylbenzene from microwave spectroscopy is shown to be inaccurate in the ipso region of the benzene ring.     

Structure elucidation and 3D solution conformation of the antibiotic enduracidin determined by NMR spectroscopy and molecular dynamics

Enduracidin and ramoplanin belong to the large family of cyclodepsipeptide antibiotics, highly effective against Gram-positive bacteria. The primary and 3D solution structure of ramoplanin is already well known, and the primary structure of enduracidin has been determined by a combination of chemical and NMR spectroscopic methods. Both antibiotics share a similar peptide core of 17 amino acids and differ mainly in the length of the acyl chain and the presence of two D-mannose moieties in ramoplanin. Based on the high sequence homology with ramoplanin, the structure in solution of enduracidin is modeled as a cyclic peptide. The tertiary structure thus obtained was refined through molecular dynamics (MD) simulation, in which the interatomic NOE-derived distance restraints were imposed. MD simulations yielded a family of representative 3D structures (RMSD = 0.89), which highlighted a backbone geometry similar to that of ramoplanin in its beta-hairpin arrangement. In contrast, enduracidin displays a different arrangement of the side-chain and of the residues forming the hydrophobic core.     

Plastic deformation kinetics for glassy polymers and blends

Measurements of the plastic deformation kinetics for several glassy (PS, PC, PI-polyimide, PET, epoxy-amine network), semi crystalline polymers (PBT, PET) and blends (ABS, PC:ABS, PC: PBT) were performed for the unidirectional compression loading conditions by using constant temperature deformation calorimetry. The experiments have permitted us to follow the changes of the mechanical work (A), the heat of deformation (Q) and differences between these quantities, i.e., internal energy (U) stored in samples during their loading and unloading. Experiments have shown that the large portion (45–85%) of the mechanical work of deformation (A) is converted to heat (Q). The rest ofA is converted to internal energy (U) stored in deformed samples. U is quite high as compared with metals [1,2]. After complete unloading of plastically deformed samples, i.e., samples carrying irreversible atT _def plastic deformation ( _irr ), some amount (U) of stored energy disappeared. The amount of (U and (U) are different for different polymers. All data are analyzed in the framework of the model proposed in [3,4]. The experiments support the deformation model where the plasticity of glassy polymers is the process of nucleation and development of so-called PDs-plastic local shear defects of nonconformational and nondilatational nature.Dedicated to Prof. Dr. W. Pechhold on the occasion of his 60th birthday     

Electrochemical behavior and determination of epinephrine at a mercaptoacetic acid self-assembled gold electrode

The electrochemical behavior of epinephrine (EP) at a mercaptoacetic acid (MAA) self-assembled monolayer modified gold electrode was studied. The MAA/Au electrode is demonstrated to promote the electrochemical response of epinephrine by cyclic voltammetry. The possible reaction mechanism is also discussed. The diffusion coefficient D of EP is 6.85 × 10⁻⁶ cm² s⁻¹. In 0.1 mol L⁻¹ phosphate buffer (pH 7.20), a sensitive oxidation peak was observed at 0.177 V, and the peak current is proportional to the concentration of EP in the range of 1.0 × 10⁻⁵–2.0 × 10⁻⁴ mol L⁻¹ and 1.0 × 10⁻⁷–1.0 × 10⁻⁶ mol L⁻¹. The detection limit is 5 × 10⁻⁸ mol L⁻¹. The modified electrode is highly stable and can be applied to the determination of EP in practical injection samples. The method is simple, quick, sensitive and accurate.