复射影空间Pn中n+q+1次非退化曲面

文中定义了复射影空间P^n中的非退化曲在，并对P^n中n q 1次非退化代数曲面进行了分类。     

Analysis and design of mechanical crack arrestors for gas pipeline

Mechanical arrestors are frequently used in gas transmission pipelines to prevent the possibility of long running cracks. These arrestors have the effect of reducing the pipe from opening as the crack passes. This decreases the available crack driving force and, as a result, crack arrest may take place. This essentially is a second line of defence against catastrophic failure in the event crack initiation cannot always be prevented. A novel analyzing method presented in this paper has been developed to investigate the suitability of these crack arrestors. This is based on a fluid/structure/fracture interaction package, PFRAC. A dynamic finite element approach has been developed for a three dimension curved beam with initial plane curvature, which has been implemented in PFRAC to simulate the behaviour of the arrestor. The contact conditions between the pipe wall and the arrestor, along with the various computational procedures, are described. Several numerical results for a cracked pipe with arrestors are presented and compared with those for pipes without arrestors.     

进口附面层厚度对大转角弯叶片损失的影响

进口附面层厚度对大转角弯叶片损失的影响韩万今，吕红卫，芦文才，王仲奇（哈尔滨工业大学哈尔滨１５０００１）关键词：进口附面层，大转角，弯叶片叶片损失来源于两方面：一是进口附面层带来的“原”损失，二是绕流叶栅产生的新损失。二次流引起“原”损失重新分布，并...     

滚柱轴承离合器的形面研究

对国外新型产品滚柱式轴承离合器进行了分析研究。     

曲线钢轨波磨打磨方法

在研究地铁波磨成因机理基础上,调研分析了现有打磨手段特点和局限性,提出了一种新型的简易打磨方法,实现了更精准和有效的快速打磨.研制了自动化便携式多轮组打磨装置,在地铁线路上进行了打磨试验,并对地铁线路曲线钢轨波磨区段进行了添乘车厢振动和噪声测试以及波磨数据的精确测量.打磨前后的测试数据和波磨测量数据表明,打磨后的线路车辆车厢振动明显降低,打磨前出现的啸叫声完全消失,噪声明显减弱,表明所研制的打磨机对曲线段的钢轨波磨能进行有效治理,打磨效果和效率优于传统的打磨方法和装置.     

自然弯扭梁的非线性分析

研究了两端边界均为完全约束的自然弯扭梁在小应变，大位移和大转动情况下的非线性性质，并考虑了横向剪切变形和扭转翘曲变形的影响，分析中还包括了拉伸，弯曲和扭转的各种弹性耦合。由最小势能原理可以导出所给问题的平衡方程。这里欧拉角可以用来表示任意大的转动。该方法还可方便地推广到其他各种不完全约束边界的情况。此外，利用上述结果还可以得到该梁在小位移理论中的基本方程和有关公式。     

On the stability of elastic curved bars

A general discussion about the stability of arbitrary elastic curved bars in space under combined actions of bending and twisting is given in this paper. A system of Eqs. (28)–(36) for perturbation functions near some equilibrium state is presented. With appropriate boundary conditions, the nontrivial solution corresponds to the critical state. Five examples are analysed in this paper. Some of them are new results and others are old problems treated using the new method.     

The development of an axisymmetric curved turbulent wall jet

An experimental study has been carried out of the low speed Coanda wall jet with both streamwise and axisymmetric curvature. A single component laser Doppler technique was used, and by taking several orientations at a given point, values of the three mean velocities and five of the six Reynolds stresses were obtained. The lateral divergence and convex streamwise curvature both enhanced the turbulence in the outer part of the jet compared with a plane two-dimensional wall jet. The inner layer exhibited a large separation of the positions of maximum velocity and zero shear stress. It was found that the streamwise mean velocity profile became established very rapidly downstream of the slot exit. The profile appeared fairly similar at later downstream positions, but the mean radial velocity and turbulence parameters showed the expected nonself preservation of the flow. Removal of the streamwise curvature resulted in a general return of the jet conditions toward those expected of a plane wall jet. The range and accuracy of the data may be used for developing turbulence models and computational techniques for this type of flow.     

空间曲线索的平衡方程及单索几何判定

空间曲线索平衡方程可在理想柔索假定的基础上进行推导,也可以由空间曲线梁平衡方程退化得到。本文给出后者的连续化分析过程并进行了初步的讨论,目的在于将空间曲线索的各种力学模型统一起来。采用理想柔索假定后单索只能是平面曲线,自然坐标系和整体直角坐标系下平面曲线索的平衡方程是等价的。同时,针对以往单索连续化分析中几何判定的不足,基于空间曲线的弧长独立参数概念,指出单根理想柔索本质上为静不定和动不定体系。     

压电激励圆形曲梁的静态响应及位移控制

研究压电激励圆形曲梁的静态位移响应及位移控制的参数特性。将压电夹层圆形曲梁等效为单层结构,基于一维小曲率曲梁理论,建立其控制方程。在集中弯矩和径向集中力以及电载荷作用下,分析了带压电激励器的圆形悬臂曲梁的静态响应。与有限元结果比较表明:本文的理论模型能够模拟压电激励的小曲率圆形曲梁的静态响应。压电夹层圆形曲梁在任意位置的径向集中力载荷作用下,控制其自由端径向位移响应为零,求得控制电压的解析表达,数值分析表明:随着集中力载荷的位置变化和梁长的变化,最优控制电压将出现峰值和反号。