A ketone-functionalized aromatic saddle as a potential building block for negatively curved carbon nanobelts

Herein, we report the synthesis and crystal structure of a novel ketone-functionalized aromatic saddle, which is a potential building block for synthesis of negatively curved carbon nanobelts.     

用于Z箍缩X辐射谱诊断的柱面凸晶摄谱仪的性能分析

 考虑X光源的空间尺寸和晶体的摇摆曲线,用光线追迹方法计算了诊断丝阵Z箍缩等离子体X辐射谱的柱面凸晶摄谱仪的色散、能谱分辨和空间分辨以及系统参数对它们的影响。结果表明：决定柱面凸晶摄谱仪能谱分辨的主要因素是光源尺寸以及光源-晶体之间距离;增大光源-晶体之间距离能够改善能谱分辨,但导致径向空间分辨能力下降。并依此建立了云母晶体摄谱仪,在“强光一号”装置上对系统进行了测试,获得时间积分铝丝阵负载Z箍缩等离子体X辐射谱。     

A study of properties of adaptive quadratic grids for three-dimensional near-surface field computations

Curved geometries and the corresponding near-surface fields typically require a large number of linear computational elements. High-order numerical solvers have been primarily used with low-order meshes. There is a need for curved, high-order computational elements. Typical near-surface meshes consist of hexahedral and/or prismatic elements. The present work studies the employment of quadratic meshes that are relatively coarse for field simulations. Directionally quadratic high-order elements are proposed for the near-surface field regions. The quadratic meshes are compared with the conventional low-order ones in terms of accuracy and efficiency. The cases considered include closed surface volume calculations, as well as computation of gradients of several analytic fields. A special method of adaptive local quadratic meshes is proposed and evaluated. Truncation error analysis for quadratic grids yields comparison with the conventional linear hexahedral/prismatic meshes, which are subject to typical distortions such as stretching, skewness, and torsion.     

Boundary Layer Flow over a Curved Surface Imbedded in Porous Medium

This research is made to visualize the boundary layer flow by a curved stretching sheet embedded in porous medium. The geometry is bended(curved), therefore the curvilinear coordinates are used to model the present problem.Fluid is electrically conducting with the presence of uniform magnetic field. The governing non-linear partial differential equation reduces to non-linear ordinary differential equations by using the dimensionless suitable transformations. The numerical solutions are obtained by using the method bvp4c from MATLAB. The effects of curvature parameter, nondimensional magnetic parameter, and porosity parameter on the velocity field and skin friction coefficient are examined.The skin friction profile enhances with enhancing the values of porosity and magnetic parameter. Comparison of the present results with the existing results in the literature for the flat surface is also given.     

Electrochromic Detection of Latent Fingermarks on Metal Surface Using 1,1′-Dibenzyl-4,4′-bipyridinium Dichloride

The electrochromic detection of latent fingermarks on polished or unpolished, flat or curved metal surfaces is described using electrochromic material, 1,1’-dibenzyl-4,4’-bipyridinium dichloride. The surface area covered by fingermarks acts as an insulating mask, causing 1,1’-dibenzyl-4,4’-bipyridinium dichloride to change color and produce inversed images of the fingermark. By changing the applied potential, the optical properties of 1,1’-dibenzyl-4,4’-bipyridinium dichloride can be continuously and reversibly adjusted to optimize the visual contrast of fingermarks, so as to realize the detection of latent fingermarks on stainless steel surface. It is demonstrated that the fabricated electrochromic devices can detect the fingermarks on these types of surfaces within twenty seconds at −1.0∼−2.0 V. This work can qualify as a tangible improvement in fingermark detection of the natural fingermarks on the never-cleaned (more than 3 years) and curved surfaces of daily-used container, e. g. cup, and the handle of cleaning tool, mop.     

Incompatible curved quadrilateral plate bending element with 12-degrees of freedom

This paper presents a new curved quadrilateral plate element with12-degree freedom by the exact element method.The method can be used to arbitrary non-positive and positive definite partial differential equations without variation principle.Using this method,the compatibility conditions between element can be treated very easily,if displacements and stress resultants are continuous at nodes between elements.The displacements and stress resultants obtained by the present method can converge to exact solution and have the second order convergence speed.Numerical examples are given at the end of this paper,which show the excellent precision and efficiency of the new element.     

A calculation method for fully developed flows in curved rectangular tubes

I.IntroductionacestudyofviscousnowincurvedtubesisoffundamentalinterestinfluidmechanicssincetheDean'spioneerwork(1928)l']oncurvedpipes.Therearenumerousapplications,whichincludetheflowsthroughturbomachinery,aircraftintakes,diffusersandheatexchangersetc.Itwa…     

充分发展管流计算中的一种方法

本文结合摄动法、伽辽金法和有限差分法求解小曲率及小Dean数情形下充分发展的弯曲矩形管中的二次流流函数ψ、轴向速度w,该方法避免了直接求解N－S方程的巨大工作量,也克服了通常流函数法中构造高阶差分的困难.小曲率、小Dean数情形针对不同宽高比的计算结果与前人的计算与实验结果对比表明,该方法是成功的.     

弹性支承圆弧梁内力分析

以现代桥梁及房屋结构为工程背景,提出弹性支承曲线梁计算模型,按结构力学方法推导出弹性支承圆弧梁的内力计算公式,分析讨论了竖向和抗扭弹性支承对内力的影响．     

The perturbation parameter in the problem of large deflection of clamped circular plates

In the problems of large deflection of clamped circular plates under uniformly distributed loads, various perturbation parameters relating to load, deflection, slope of deflection, membrane force, etc, are studied. For a general perturbation parameter, the variational principle is used for the solution of such a problem. The applicable range of these perturbation parameters are studied in detail. In the case of uniformly loaded plate, perturbation parameter relating to central deflection seems to be the best among all others. The method of determination of perturbation solution by means of variational principle can be used to treat a variety of problems, including the large deflection problems under combine loads. This paper is completed under the guidance of Prof. Chien Wei-zang.