大孔树脂提取中药有效成分的放大研究

用两种不同的方法对大孔树脂吸附柱进行了工艺放大,确定了大柱的上柱流量,计算出其吸附量、吸附效率等参数.结果表明,采用保持柱内通过时间不变(v/L=常数)的方法进行放大,其计算值与实验值吻合较好,树脂的吸附效率在90%左右,处理能力能够满足生产需要,可以作为大孔树脂吸附柱工艺放大的依据.当上柱流量在40～170L·h-1范围内变动时,其吸附效率在71 15%～91 56%的范围之内变化.     

Boundary control of a hyperbolic system with time lags

This paper considers an optimal boundary control problem fora hyperbolic system in which constant time lags appear in thestate equation and in the boundary condition simultaneously.Making use of Lion's scheme, necessary and sufficient conditionsof optimality for the Neumann problem are derived.     

An evolutionary method for optimization of plate buckling resistance

Optimization of plate buckling resistance is very complicated, because the in-plane stress resultants in the prebuckled state of a plate are functions of thickness distribution. This paper discusses the problem of finding the optimum thickness distribution of isotropic plate structures, with a given volume and layout, that would maximise the buckling load. A simple numerical method using the finite-element analysis is presented to obtain the optimum thickness distribution. Optimum designs of compression-loaded rectangular plates with different boundary conditions and plate aspect ratios are obtained by using the proposed method. Optimum designs from earlier studies and the methods of buckling analysis used to attain these results are discussed and compared with the designs from the proposed method. This paper also examines the reliability of the optimality criterion generally used for plate buckling optimization, which is based on the uniform strain energy density.     

Second-order necessary optimality conditions for domain optimization problems of the Neumann type

In this paper, we treat a domain optimization problem in which the boundary-value problem is a Neumann problem. In the case where the domain is in a three-dimensional Euclidean space, the first-order and the second-order necessary conditions which the optimal domain must satisfy are derived under a constraint which is the generalization of the requisite of constant volume.Portions of this paper were presented at the 13th IFIP Conference on System Modelling and Optimization, Tokyo, Japan, 1987.     

Industrial multi-stage continuous filtration process: influence of operating parameters

This paper presents a theoretical study of the effects of operating parameters on the behaviour of an industrial crossflow filtration unit. A continuous three stage unit and its application to yeast cell harvesting are considered. A model of standard industrial processing is developed, and the influence of dead volumes, start-up procedure, crossflow and permeation velocities and maximum transmembrane pressure are investigated. Concentration factors are discussed with respect to the effects due to dead volumes.     

正交试验法优化CS汽化吸附条件

通过正交试验设计,优化了影响西埃斯(CS)标准样品管制备的参数:汽化温度、采样流速、采样时间。结果表明,CS标准样品管的最佳吸附条件为汽化吸附温度:260℃,采样N2流速:330mL/min,采样时间:15min。在15~1500ng范围内,色谱峰面积与进样量有良好的线性关系,线性相关系数为0.9995,检出限为6.0ng。     

蒿甲醚在模拟体内酸碱环境中的代谢动力学研究

 利用高效液相法对蒿甲醚进行了模拟体内酸碱环境的代谢动力学研究 ,测定了蒿甲醚及其代谢产物双氢青蒿素、蒿甲醚呋喃酯的代谢曲线。结果表明 ,蒿甲醚在模拟体内肠道和血液的弱碱性环境条件下半衰期为2 87 2min(计算值 ) ;在模拟体内胃液的酸性环境条件下半衰期为 74 6min ;在两种条件下的主要代谢产物均为双氢青蒿素和蒿甲醚呋喃酯。该方法克服了以往文献所报道方法的一些缺点 ,不仅简化了样品制备方法 ,也提高了检测结果的准确性。     

Fused silica capillary deactivation with D4 in the presence of oxygen

A new, simple procedure to deactivate fused silica capillaries without hydrothermal treatment is proposed. Based on high temperature reactions of octamethylcyclotetrasiloxane (D₄) in the presence of oxygen, this procedure results, upon coating with dimethylsilicone (SE-30), in columns which give almost symmetric peaks for as little as 150 pg of critical compounds, such as decylamine, thereby demonstrating very high inertness. A mechanism of the deactivation procedure, which, in contrast to previously developed procedures, is based on thermal reactions under aerobic conditions, is proposed.     

Dynamic optimization problems with bounded terminal conditions

Bounded terminal conditions of nonlinear optimization problems are converted to equality terminal conditions via the Valentine's device. In so doing, additional unknown parameters are introduced into the problem. The transformed problems can still be easily solved using the sequential gradient-restoration algorithm (SGRA) via a simple augmentation of the unknown parameter vector . Three example problems with bounded terminal conditions are solved to verify this technique.This research was supported in part by the National Aeronautics and Space Administration under NASA Grant No. NCC 2-106.     

Sufficient conditions for a strong relative minimum in an optimal control problem

In this paper, on the basis of Young's method (Ref. 1), sufficient conditions for a strong relative minimum in an optimal control problem are given. Young's method generalizes geodesic coverings and the simplest Hilbert integral from the standard variational calculus. This paper carries Young's method over to nonparametric problems.