Isotactic poly(propylene‐co‐1‐pentene‐co‐1‐hexene) terpolymers: Synthesis,molecular characterization,and evidence of the trigonal polymorph

Terpolymers based on propylene with 1‐pentene and 1‐hexene as comonomeric units are satisfactorily synthesized using a metallocene catalyst. Thus, several terpolymers are prepared with distinct overall compositions in comonomers as well as three different 1‐pentene/1‐hexene ratios at a given composition to evaluate the influence on polymerization activity, intrinsic viscosity, and microstructural details. The new trigonal δ polymorph is observed in those quenched terpolymers with a global content in comonomers of about 14 mol %, independently of the ratio between both comonomers. However, preliminary results indicate a profound influence of that ratio on the crystallization rate. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3251–3259     

Polymers Derived from 4-Substituted Salicylic Acids as Antifungal Agents

4-Amino-, chloro-, and bromo-substituted salicylic acid-formaldehyde polymers and their metal chelates were screened for their antifungal activity. Various copolymers prepared from 4-chloro-(bromo)salicylic acid, formaldehyde, and other comonomers were also screened for their antifungal activity. All these polymers, copolymers, and polychelates were found active against several fungi Their fungicidal activities are compared with those of the corresponding monomers and monomeric chelates.     

Effect of cholesteric liquid crystalline elastomer with binaphthalene crosslinkings on thermal and optical properties of a liquid crystal that show smectic A‐cholesteric phase transition

A side‐chain polysiloxane cholesteric liquid crystalline elastomer (ChLCE) with binaphthalene derivate as crosslinkings and cholesterol derivate as liquid crystalline monomers was designed and synthesized. A binaphthyl chiral dopant (CD) was synthesized as well. The chemical structures and liquid crystalline properties of the ChLCE and the CD were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, element analyses, differential scanning calorimetry and polarizing optical microscopy measurements. The helical twisting power of the ChLCE exhibited a turning point with changing temperature and was smaller than that of the CD. In addition, the effect of the ChLCE on phase transition temperatures and thermal‐optical properties of a liquid crystal that show smectic A (SmA)‐cholesteric (Ch) phase transition was studied. Worthily, the testing of the reflection wavelength with changing temperature suggested that the adding of the ChLCE in liquid crystals that show SmA‐Ch phase transition can expedite their SmA‐Ch transition. In addition, the network structure of the ChLCE may play a significant role in the accelerating of the transition. These properties provided theoretical and experimental foundations for applying ChLCE in thermally sensitive liquid crystal devices requiring fast response, such as thermally controllable windows, materials and displays. Copyright © 2012 John Wiley & Sons, Ltd.     

碳纳米管/纳米金修饰金电极上柔红霉素电化学行为的研究

将碳纳米管与纳米金结合修饰在金电极上制成修饰电极,并用于柔红霉素(DNR)的电化学行为研究和检测.在4.4 mmol/L磷酸盐缓冲溶液(pH=5.81)中,DNR在碳纳米管-纳米金/Au电极上有一对灵敏的氧化还原峰.还原峰电流与DNR的浓度在3.2×10-8～1.0×10-6mol/L和1.0× 10-6～2.2× 1...     

丙烯酸酯接枝炭黑无皂水性涂料的性能研究

旋转粘度计研究了丙烯酸酯接枝炭黑无皂水性涂料的流变性能，并考察了着色涂料的冻融及贮存稳定性。接枝炭黑争散于无皂水性涂料中形成的着色涂料具有良好的综合性能。     

激光光散射研究丙烯酰胺-二甲基二烯丙基氯化铵共聚物的溶液行为

用激光光散射技术表征了阳离子含量受控的丙烯酰胺 二甲基二烯丙基氯化铵共聚物 (简称P(AM DMDAAC) )在 0 1mol LNaCl溶液中的基本参数和溶液行为 .表观基本参数 : Mw ,app =5 0 4× 10 5g·mol- 1 、app =39 9nm和A2 ,APP =1 5× 10 - 4cm3·mol·g- 2 .动态光散射研究结果表明 ,扩散系数Dt 与角度、浓度皆呈非线性依赖关系 ,当C >C 或在较大的散射角域 ,Dt 偏离线性关系所预示的理论值而向减小的方向发展 ,表明存在缔合物 ;流体力学半径Rh 分布有大、小两个范围 ,并随温度升高向小尺寸方向发展 ,证明了体系中存在缔合行为以及升温的解缔合作用 .在一定条件下 ,“亚稳定性”的存在有力地旁证了体系的缔合行为     

Inorganic—Organic Hybrid 18—Molybdodiphosphate Nanoparticles Bullk—modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic‐organic hybrid 18‐molybdodiphosphate nanoparticles ([(C₄H₉)₄N]₆P₂Mo₁₈Q₆₂·4H₂O) was firstly used as a bulk‐modifier to fabricate a three‐dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square‐wave voltammetry. The hybrid 18‐molybdodiphosphate nanoparticles bulk‐modified CPE (MNP‐CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP‐CPE over the traditional polyoxometalates‐modified electrodes are their excellent reproducibility of surface‐renewal and high stability owing to the insolubility of the hybrid 18‐molybdodiphosphate nanoparticles.     

The structural phase transitions of aminoguanidinium(1+) dihydrogen phosphate—study of crystal structures, vibrational spectra and thermal behavior

Aminoguanidinium(1+) dihydrogen phosphate was prepared by crystallization from aqueous solution. On the basis of the results of DSC measurements, X-ray structural analysis was carried out at temperatures of 160, 215 and 293 K for three aminoguanidinium(1+) dihydrogen phosphate phases ( |Z=2|non-ferroic |melting point 408 K; II |201-222 K|(2) |Z=2|non-ferroic|-; III |<201 K|(2)|Z=4|non-ferroic|-). The triclinic unit cell dimensions (a=6.8220(2), b=7.1000(2), c=7.4500(2) Å, α=86.925(2)°, β=80.731(2)°, γ=79.630(2)°, V=350.21(2) Å³—phase I) are similar for all three structural phases with the exception of phase III, where doubling of the c-axis length leads to an increase in the volume to 692.34(3) Å³. The crystal structure of all three modifications consists of parallel layers of dihydrogen phosphate anions that are interconnected by aminoguanidinium(1+) cations through hydrogen bonds of the N-H…O type. The planar aminoguanidinium(1+) cations are oriented almost parallel to each other and are perpendicular to the anion layers. The primary differences amongst phases I, II and III lie in the location of the H atom in the short O-H…O bonds connecting the dihydrogen phosphate anions in layers. The FTIR and FT Raman spectra of natural and deuterated compounds were recorded and interpreted. The FTIR spectra were studied down to a temperature of 90 K.     

High-temperature transformations of Cu-rich hydrotalcites

CuM(II)Al ternary hydrotalcites (M(II) = Ni, Co and Mg) with a (Cu+M(II))/Al atomic ratio of 3.0 and Cu/M(II) atomic ratio of 5.0 were synthesized by coprecipitation under low supersaturation. Powder X-ray diffraction of the as-synthesized samples showed a pattern characteristic of hydrotalcite-like (HT-like) structure (JCPDS: 41-1428). Thermal analyses of these samples showed four stages of weight loss/heat change when recorded in nitrogen. Analysis of the evolved gases characterized the nature of these transformations. The thermoanalytical effects differed significantly especially for the high-temperature transformations, when the treatment was performed in oxygen. In situ powder X-ray diffraction of the samples was carried out to elucidate the phase evolution of these compounds. Surprisingly formation of CuO was noted at temperatures around 200°C well below the destruction of the layered network. The nature of the resulting phases varied with both the nature of the co-bivalent metal ion and the heating atmosphere. FT-IR spectroscopy confirmed the retention of carbonate ions at higher temperatures (above 700°C), although the concentration of carbonate anion (most likely unidentate) varied with the calcination temperature. The crystallinity of CuO increased significantly above 600°C, probably through dissociation of copper oxycarbonate. Significant differences in the thermal transformation temperatures (for the third and the fourth transformations) of these samples containing different co-bivalent metal ions were not observed. This suggests that an association of the co-bivalent metal ions and/or trivalent metal ion in this phase is unlikely. A plausible thermal evolution scheme of these hydrotalcites is proposed.     

纳米钛酸钙粉体的制备及其对水中铅和镉的吸附行为

采用柠檬酸络合溶胶-凝胶法制备了纳米钛酸钙粉体. 以X射线衍射(XRD)、透射电子显微镜(TEM)和傅立叶变换红外光谱(FTIR)对其进行了表征. 考察了该纳米粉体对水中重金属铅和镉的吸附性能, 并以镉离子为例, 系统地研究了吸附热力学和动力学. 结果表明, 该法合成的钛酸钙为钙钛矿结构的纳米粉体, 粒径大小受灼烧温度的影响, 灼烧温度越高, 粉体平均粒径越大, 600 ℃灼烧2 h条件下, 粉体的平均粒径最小, 约为20 nm. 当介质的pH值为4～8时, 钛酸钙对水中的铅和镉具有很强的吸附能力. 其对镉离子的吸附行为符合Langmuir 吸附等温模型和HO准二级动力学方程式, 吸附过程焓变(ΔH)为39.312 kJ&#8226;mol－1, 各温度下的自由能变(ΔG)均小于零, 熵变(ΔS)均为正值, 吸附过程的活化能(Ea)为20.359 kJ&#8226;mol－1. 该吸附过程是自发的吸热物理过程. 被吸附的铅和镉均可用1 mol&#8226;L－1的硝酸完全洗脱回收. 对铅和镉的富集因子均超过200. 将其应用于水中痕量铅和镉的吸附富集和测定, 回收率分别为96.3%～107.2%和93.5%～104.0%, 与石墨炉原子吸收光谱法测定结果一致.