一种考虑聚醚醚酮（PEEK）不同力学状态的本构模型

聚醚醚酮（简称PEEK）以其优良的性能而广泛应用于高端机械、 核工程和航空等科技领域.为了描述其在应变、应变率和温度3种因素作用下的力学行为,依据PEEK在不同温度下呈现的3种力学状态,在著名的JC(Johnson Cook)本构模型的基础上,提出了针对高分子不同力学状态的分段JC本构模型.与传统JC模型及文献中改进JC模型相比,提出的分段JC模型能够更精确地表征PEEK在中高温下的力学行为,为PEEK在复合材料中的应用和分析奠定了理论基础.     

QUALITATIVE ANALYSIS OF DYNAMICAL BEHAVIOR FOR AN IMPERFECT INCOMPRESSIBLE NEO-HOOKEAN SPHERICAL SHELL

IntroductionIn applications, it is commonly considered that the phenomena of cavity formation,growth and run-through of adjacent cavities occur in materials as precursors to failure. Thesephenomena are mainly due to instability of materials. On the other …     

Axisymmetric bifurcation analysis in soils by the tangential-subloading surface model

This article discusses localized bifurcation modes corresponding to shear band formation and diffuse bifurcation modes corresponding to bulge formation for cylindrical soil specimen subjected to an axisymmetric load under undrained conditions. We employ the tangential-subloading surface model, which exhibits the characteristic regimes of the governing equations: elliptic, hyperbolic and parabolic. Also, conditions for shear band formation, shear band inclination, diffuse bulging formation, and the long and short wavelength limits of diffuse bulging modes are discussed in relation to material properties and their state of stress, i.e. the stress ratio and the normal-yield ratio. Tangential-plastic strain rate term is required for the analyses of shear band and diffuse bulging. The shear band and the diffuse bulging are generated in not only normal-yield but also subyield states and they are severely affected by the normal-yield ratio describing the degree of approach to the normal-yield state.     

几种酰胺类化合物作为添加剂对钢—钢和钢—铝摩擦副摩擦学性能的影响

采用四球摩擦磨损试验机和SRV摩擦磨损试验机考察了 4种酰胺化合物对钢 -钢和钢 -铝摩擦副摩擦磨损性能的影响 ,用X射线光电子能谱 (XPS)分析了丙烯酰胺润滑下铝合金磨斑表面元素的化学状态 .结果表明 :对钢 -钢摩擦副 ,酰胺类化合物表现出一定的抗磨减摩作用 ,对钢 -铝摩擦副 ,丙烯酰胺和乙酰胺表现出良好的抗磨减摩性能 .XPS分析结果显示 ,铝合金磨斑表面存在 3种价态的氮的化合物及 2种价态的铝 ,表明其磨损表面生成了复杂的反应膜     

Paradoxical Bending Behavior of Shearable Nonlinearly Elastic Rods

In nonlinear elasticity the exact geometry of deformation is combined with general constitutive relations. This allows a very sophisticated interaction of deformations in different material directions. Based on the Cosserat theory for planar deformations of nonlinearly elastic rods we demonstrate some paradoxical bending effects caused by a nontrivial interaction of extension, flexure, and shear. The analytical results are illustrated by numerical examples.     

Cu-Al-Be形状记忆合金湿磨粒磨损性能研究

采用销-盘式二体磨损试验研究了CuAlBe形状记忆合金的湿磨粒磨损行为．结果表明，CuAlBe形状记忆合金的磨损性能不完全取决于材料硬度，具有热弹性马氏体组织的A合金的抗磨性优于高硬度B合金．在湿磨粒磨损条件下，A合金具有β′1 β双相组织，在磨粒的交变应力作用下，由于β相应力诱发马氏体相变、β′1相马氏体变体择优取向并产生形状记忆效应，使应变弹性回复，并钝化裂纹尖端，使得A合金具有优良的抗磨粒磨损性能．     

金属蒸气真空弧离子源CO离子注入对不锈钢摩擦磨损性能的影响

采用金属蒸气真空弧离子源对1Cr18Ni9Ti不锈钢进行Co离子注入,考察了注入处理试样的摩擦磨损性能.结果表明:Co注入处理样品的表面硬度比未注入样品的高1.0～1.5倍,且硬度随离子束流密度的增大而增大;Co注入处理试样的摩擦系数显著降低至约0.20,磨损体积损失降低25%～45%;当束流密度为22μA/cm2、注入剂量为5×1017/cm2时,注入处理样品的摩擦系数为0.19,耐磨寿命最长;在所选定的试验参数范围以内,当临界束流密度处于22μA/cm2时,保留剂量最大,改性表面硬度最高,耐磨性能最佳.     

Phase and Interfacial Tension Behavior of Certain Model Gas Condensates: Measurements and Modeling

This contribution reports on the phase and interfacial tension behavior of some model high-temperature–high-pressure gas condensates. On the one hand these types of gas condensate are becoming a subject of major interest for the oil industry, while on the other their phase and interfacial tension behavior have not been very well studied. For two different model gas condensates, both composed of the three n-alkanes, methane, butane, and decane, experimental results on their fluid phase behavior have been obtained in the temperature region 270 < T (K) < 490 and up to pressures as high as 24 MPa. Also, critical points of the two mixtures have been determined experimentally. Both mixtures show an extended retrograde region. Using the Peng–Robinson equation of state, the phase behavior of the two mixtures was modeled. In addition, the interfacial tension behavior of the model gas condensates was modeled. For that purpose, the Cahn–Hilliard theory was applied in combination with the Peng–Robinson equation of state. Satisfactory results were obtained.     

Seismic behavior of insulated hollow-brick cavity walls using quasi-static experimentation

This paper focuses on an experimental investigation of different types of insulated hollow-brick cavity walls, i.e., walls with a door opening, with a window opening and without any opening, characterized with different tie bar arrangements, subjected to slowly applied cyclic loads. The cracking and damage patterns, strength and stiffness degradation and deterioration, energy dissipation capacity and hysteretic feature are analyzed. Based on the experimental results, the formulae of calculation for the cracking load and the ultimate load of cavity wall are mathematically established. The evaluation equation of strength and stiffness degradation of walls is presented and its parameters are numerically given from regression results. The original characteristic curves of recovery force-displacement of actual specimens under cyclic loads are discussed, and then a standard recovery force-displacement model is suggested with convenient forms for implementation.     

Coupled thermo-mechanical modelling of bulk-metallic glasses: Theory, finite-element simulations and experimental verification

A three-dimensional, finite-deformation-based constitutive model to describe the behavior of metallic glasses in the supercooled liquid region has been developed. By formulating the theory using the principles of thermodynamics and the concept of micro-force balance [Gurtin, M., 2000. On the plasticity of single crystals: free energy, microforces, plastic-strain gradients. J. Mech. Phys. Solids 48, 989-1036], a kinetic equation for the free volume concentration is derived by augmenting the Helmholtz free energy used for a conventional metallic alloy with a flow-defect free energy which depends on the free volume concentration and its spatial gradient. The developed constitutive model has also been implemented in the commercially available finite-element program ABAQUS/Explicit (2005) by writing a user-material subroutine. The constitutive parameters/functions in the model were calibrated by fitting the constitutive model to the experimental simple compression stress-strain curves conducted under a variety of strain-rates at a temperature in the supercooled liquid region [Lu, J., Ravichandran, G., Johnson, W., 2003. Deformation behavior of the Zr-Ti-Cu-Ni-Be bulk metallic glass over a wide range of strain-rates and temperatures. Acta Mater. 51, 3429-3443].With the model calibrated, the constitutive model was able to reproduce the simple compression stress-strain curves for jump-in-strain-rate experiments to good accuracy. Furthermore stress-strain responses for simple compression experiments conducted at different ambient temperatures within the supercooled liquid region were also accurately reproduced by the constitutive model. Finally, shear localization studies also show that the constitutive model can reasonably well predict the orientation of shear bands for compression experiments conducted at temperatures within the supercooled liquid region [Wang, G., Shen, J., Sun, J., Lu, Z., Stachurski, Z., Zhou, B., 2005. Compressive fracture characteristics of a Zr-based bulk metallic glass at high test temperatures. Mater. Sci. Eng. A 398, 82-87].